Question about RCA Televison & Video

1 Answer

Model vr525 s#843780302 I can not get to appear on the TV screen. It use to perfectly,until I pressed the wrongh button, then it failed work. Please help to get workihg again, as I like this VCR.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, postback the brand and model number of the TV and the type / colors of the cables / plugs used to connect the VCR to the TV.

Offhand and assuming that no wires/cables were changed, the RCA VR525 could only be connected 2 ways to a TV:

  • RF coaxial patchcord - which would mean that the TV must be set to Channel 03 (or 4 depending on the settings); or
  • A V - external video source. Depending on the model of the TV, this maybe termed as AV, Video, Source, Input, AUX, Game, 00 or a term to that effect. The TV's remote would have a button that must be pressed (perhaps a number of times) to cycle through the choices.

Good luck and thank you for asking FixYa.

Posted on May 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue screen, can't watch anything


The main board of the TV has failed. You can get parts from here and do the repair yourself with nothing more than a phillips screw driver. TV Parts Universal TV Stands DLP Chips ShopJimmy

Apr 09, 2017 | Quasar VV1309 13 in. Combo

1 Answer

Cannot program Dish IR remote l03602


adeline_roll

You didn't specify if you are trying to program the remote to your TV or receiver. Is it a replacement remote or did it just quit working? I have provided instructions on how to program to your TV or receiver.

Address to receiver:
Remote: All Other Remotes
  1. Go to System Info screen (depending on receiver - press System Info button on receiver panel or pull smart card out till System Info screen appears on TV screen).
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button.
  5. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 3 will appear in the System Info screen under Remote Address.
Remote: Basic Remote (Television Only)
  1. Turn the Television On.
  2. Press and hold the TV Power button for three seconds until the LED flashes.
  3. Press and release the TV Power button.
  4. Press and release the Up or Down Arrow on the remote until the television turns off.
  5. After the television turns off, press and release the OK button.
  6. Test functionality with the TV.
  7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Please let me know if you have any other questions or problems. Thanks.

Ray Calo
DISH Internet Response Team

Jun 23, 2011 | DISH Network IR Remote Control

1 Answer

My remote wont work


sorrycory27

I'm not sure what the remote is not operating on: TV or receiver? I have provided instructions on how to program the remote to your TV or readdress the remote to your receiver.

Readdress remote to receiver:

Remote: All Other Remotes
  1. Go to System Info screen
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button
  5. Once the SAT button blinks three times, press record. Note: If successful the number selected in step 3 will appear in the System Info screen under Remote Address.
Program remote to TV:

Remote: Basic Remote (Television Only)
  1. Turn the Television On
  2. Press and Hold the TV Power button for three seconds until the LED flashes
  3. Press and release the TV Power button
  4. Press and release the Up or Down Arrow on the remote until the television turns off
  5. After the television turns off, press and release the OK button.
  6. Test functionality with the TV
  7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
If you have any other problems or questions, please post to this site.

Ray Calo
DISH Network

Nov 14, 2010 | DISH Network IR Remote Control

2 Answers

My tv takes like ten minutes untill it's turning on,why?


Replace any swollen capacitors in power supply.

Apr 24, 2009 | Televison & Video

2 Answers

Hotpoint wf865


press on off button till test comes up then press on off and start cancel button together for a few seconds

Jun 26, 2008 | Hotpoint Ultima WF865 Front Load Washer

2 Answers

Maxdorf tv


Press and hold the music button until the normal picture appears.

Jun 19, 2008 | Apex Digital AT2008 20" TV

2 Answers

Cant turn off panasonic PIP


To turn off the "stuck" pip on a Panasonic tv without a remote, turn off the tv. Then hold down the "Action" button on the front of the tv and press the power button. This will activate a reset and self check of the systems and voila! The pesky pip screen will be gone! This is on an approximately 10 year old regular crt "CT-xxxxx" series tv.

Jun 12, 2008 | Panasonic CT-36D32 36" TV

1 Answer

Sharp Aquos HDTV LC52D62U Caption Not Readable


Try doing the Factory Initialization (WARNING: THIS GIVES YOU ACCESS TO THE SERVICE MENU. DO NOT ADJUST ANYTHING IN THE SERVICE MENU OTHER THAN WHAT I PROVIDE YOU IN THESE INSTRUCTIONS. IF YOU DECIDED TO ADJUST ANYTHING OTHER THAN WHAT I PROVIDE YOU IN THESE INSTRUCTIONS, I WILL NOT BE RESPONSIBLE IF ANYTHING WRONG HAPPENS TO YOUR TV.)

  1. unplug tv
  2. press and hold at the same time “Vol –“ and “input” button on the TV set.
  3. while holding those buttons, plug the tv back in
  4. the tv should turn on by itself, keep holding the buttons until the letter “K” appears. Then let go
  5. then at the same time press “Vol –“ and “Ch. Down”, you should see the service menu appear (if it does not appear, try pressing the two buttons again, it needs to be exactly at the same time)
  6. Then use the “Ch. Down” button to navigate down the service menu until you see “Industry Init” (NOT Industry Init +cause)
  7. Then press “Vol +” to toggle it to “ON”
  8. Then “/////////////////” should appear.
  9. when the screen turns GREEN, unplug the TV. Wait about 30 seconds, then plug the TV back in.
  10. Then continue on with the initial setup again.

This puts the TV back into the “fresh out of the box” settings. See if this helps with your CC problem.

Mar 15, 2008 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Matsui tv model 32wn03a


With the TV on normal picture, no menus on

1 press and hold menu on the handset until the overview page appears
2 press menu again
3 put the cursor on channel 1
4 press and hold the button at the bottom of the remote with white around it until the tv starts tuning. Wait for it to finish.
5 hide delete insert etc the channels as you want them using the coloured buttons as shown on the screen

Nov 28, 2007 | Televison & Video

4 Answers

How do I reset the replace lamp message


Do you have a picture? If so the only way to reset this unit is to get a Zenith programmer remote. With this remote you can get into the service menu and reset the lamp timer and that will reset the unit.

Dec 31, 2006 | Zenith D52WLCD 52" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...