Question about Microsoft Xbox 360 Console

2 Answers

The power button turns red and the unit will not power up

Once the power button is pushed it turns from green to red and will not power on.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Looks like you got the red ring of death. If all 4 sections are red, there's nothing much you can do to fix it sadly. If only 2 were on or one in each section singularily, it'd be fixable.

Posted on May 15, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Send away to micro soft if you still have a warnty

Posted on May 15, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

prez330
  • 82 Answers

SOURCE: red light on, once push

I had this exact same problem a while back on a PS2. Turns out that I had a power surge and some of the internal components were fried. I sent it in to Sony and they had it back to me within a couple of weeks. You may not have had a power surge, but it is still possible that something inside the system has gone wrong. Have you spilled anything on it recently? That could also be an issue. Unfortunately, it is no secret that the Playstation was a relatively buggy console, so there have been numerous problems. Assuming that you didn't have a power surge or spill liquid on it, I would say your next best option would be to call Sony and see how much it would be to fix it. It might be almost cheaper to buy a new Playstation 2, if that's possible.

Posted on May 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My samsung ml-1666 printer problem is while i'm push the power on button the printer LED (RED & Green) lite goes on and its consist continue. what couse this problem.....


Two reasons I could think of

Low toner.

Pre-set counter on cartridge reaches limit.

Try removing the toner cartridge and powering the unit on.

While unit is plugged in, re-install cartridge.

Not knowing how old the printer is a the amount of use, it is had to answer

Apr 30, 2014 | Samsung ML 2010 Laser Printer

1 Answer

I turn on my ps3 and the green light comes on for a short time and the it beeps three times shuts off and the green light turns red and starts to flash. If I push the power button again the red Light


you need to change your power box there is a bad connection with the wires. its over heating you might whant to buy another at game stop or take it in to get fixed. the more you messed with it it might mess up your whole system.

Aug 18, 2012 | Sony Playstation 3 (PS3) Console

1 Answer

How do i reset the service light on a bhm (voyager) v4 ceiling hoist?


To turn off the service light that is flashing red on your V4 BHM ceiling lift, you have to proceed this way:
1- Power off the lift with the red cord
2- On the hand controller, push on the PROG + RETURN button at the same time and maintaint it
3- Power on the lift
4- Keep pushing on both buttons, and push in order: UP, DOWN, LEFT, RIGHT.
5-The green light will flash and the buzzer will beep 5 times
6- Release all buttons on the hand controller.
7-Push on the UP button many times, till your hear 4 beeps
8-Push the PROG button once.
9-Push on the LEFT button many times, till your hear 3 beeps
10- Push the PROG button once.
11-Power off the lift with the red cord, then back on.
The service light should be off.

May 25, 2011 | Health & Beauty

1 Answer

Sony kdf-37h1000. push power button and the green lite comes on steady and i can hear a fan. never gets to a picture or sound. it then sounds like it shuts power off but lite goes from flashing green to...


Hi catfishbob,
You're lamp came to its peak burning life and now its dead that's why you can't power up the unit and the led light keeps flashing. Once the lamp replace with new one your unit will back to normal again. Click this link for the replacement http://shop.ebay.com/i.html?_nkw=KDF-37H1000&_sacat=0&_odkw=sylvania+ld370sc8s&_osacat=0&_trksid=p3286.c0.m270.l1313.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Mar 05, 2011 | Sony KDF-37H1000 37" HDTV

2 Answers

TV won't turn on...after hitting the power button, the light turn green for about 3 seconds, then turns red and the screen never come on. Pressing the power button again turns the whole thing off (no...


It seems that your unit has some sort of PSU fault, or a problem that is shutting down the Power Supply Unit, PSU. This happens so that no further damage, and possible fire will occur.
You need to take the unit to a reputable service centre/man and ask for a firm "Quote" for the work to be done.

Jan 22, 2010 | NEC PlasmaSync 42MP2 42 in. Television

1 Answer

Power problems


You have bad capacitors in the power supply.

Sep 03, 2009 | RCA D52W135D 52 in. TV/DVD Combo

2 Answers

Charging Black and Decker Simple Start


First plug the charge adapter into an outlet, then plug into the unit. Push the power button to turn the unit on. Now, push the button for the light. The light should come on. At this point you hit the charge button and the green light should start blinking and there will no beeping. Then turn off the light. The green light should continue to blink and the unit will charge. This worked for me, hope it helps!

Jan 19, 2009 | Black & Decker Simple Start Car to Car...

1 Answer

Error number 1700 canon s9000 printer


knowing printer manufacturers I doubt they even have a sensor to detect that its full at all, they probably based on something crumby like print count. here are some instructions to reset the waste ink tank, the instructions vary so try them until one does the job :
Waste Ink Tank Reset

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice, then release all buttons
5: When the indicator lights steady, press RESUME three or four times. The indicator should be orange.
6: Press Power to set data



1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.



1. power off Printer
2. Push and hold resume button and push power button
3. Hold Power button and release Resume button
4. Push Resume button twice ( 2x ), and now release resume button and power button
5. Green light will blinking and stop.
6. When green light on, push resume button 4 x
7. Push Power button and printer will off, if that isn't off, push power butto again until print off position.

Aug 20, 2008 | Office Equipment & Supplies

2 Answers

Red then green blinking lights.


push power on at button (no need to hold button)and press proceed button for 2 secounds at the same time you turn on power and it should reset.

Dec 24, 2007 | NEC PlasmaSync 50MP1 50 in. Television

2 Answers

Error message


OK guys quite a simple one....

with the printer on press & hold both the small red button ( far right ) and the green, colour copy button. Whilst still holding press the power button wait till the unit powers off. Press the power button again, shortly after the unit powers on, the lights flash, let go of the two buttons your holding. The screen shoul dnow say "Init EEPROM" if it doesn't repeat procedure till it does. Now press the green colour copy button once, screen should now say "Push power sw" Press and hold the power button, the unit will power off and on again, now release the power button and your printer should be working again. Now you should change your waste pads......

Dec 05, 2007 | Epson Stylus CX6600 All-In-One InkJet...

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...