TOUCH SENSOR A/V CONTROLS NOT WORKING,VGN-CS325J (WIN 7 UL 32 BITS)

There probably is not a driver specifically for Windows 7.
Usually you will have to use the one for Windows Vista.
Windows 7 is only a glorified version of Vista anyway.

Go here:Drivers
Select the Downloads tab, then select the operating system.
If you have 32 bit Win 7 then select the 32 bit Vista.

If you have home premium then select the same for Vista.

In the next drop down menu select Original Driver.

There is one for Vista called camera module driver

You must install the correct driver.

Download it from Sony's website or by using a driver utility.

DriverEasy is good & free.

Homepage

Are you sure prog loaded, I ask because if you are upgrading from prem7 64 to Ultimate32, it should fail to load? You must have installed Ultimate 64. Apart from the blue tooth is it running OK??

You need the Win7 camera driver, check sony support at:
http://esupport.sony.com/US/perl/swu-list.pl?mdl=VGNCR220E&SelectOS=44

just enter your Win7 operating system (there are 9 versions of Win7), and select the downloads (2)
for your computer camera driver.

Versions of microsoft Win7 - determine which yours is by (these instructions are for WinXP);

START > Control Panel > System > General (tab)

Windows 7 Home Basic 32-bit
Windows 7 Home Basic 64-bit
Windows 7 Home Premium 32-bit
Windows 7 Home Premium 64-bit
Windows 7 Professional 32-bit
Windows 7 Professional 64-bit
Windows 7 Starter 32-bit
Windows 7 Ultimate 32-bit
Windows 7 Ultimate 64-bit

Hi hendridahlan,

The Touch Sensor AV Control Buttons above the Keyboard will not work if the Touchpad Driver in the Computer is not installed correctly. It is required to re-install the Touchpad Driver in the Computer to fix this issue.

You can download the Touchpad Driver from the below link.

ftp://download.sony.com/US/pc/SPDOTH-16224700-64.EXE

Please restart the Computer after the installation for the settings to take the effect. This should fix the issue.

Hope this helps.

Good Luck!

Please post back if you require further assistance.

Thanks for using FixYa.

http://esupport.sony.com/US/perl/swu-list.pl?mdl=VGN-CS215JP
This link above has all your drivers, for your PC.

Don't forget to install the Sony utilities and drivers for your laptop after the OS.  Updates are online as usual.

DOWNLOAD WEBCAM COMPANION SOFTWARE/DRIVER FROM THIS LINK http://esupport.sony.com/US/perl/swu-list.pl?mdl=VGNFZ320EB&SelectOS=48#div_pos_12

You may want to try updating the drivers directly from the Sony site - be sure to get one for Win-7 (other drivers probably will NOT work!)

http://esupport.sony.com/US/perl/swu-list.pl?mdl=VGN-FE780G

If you look at Sony's main site, this particular model is no longer being made or sold. There are a few refurb shops that sell it, but I don't see one in stock anywhere. It looks as though this was a strong 32 bit system originally. Makes me wonder why you chose the 64 bit route.

Sony will almost definitely not build drivers for a model it no longer makes and sells, as you'll find most manufacturers won't. My only suggestion at this point would be to try a 32 bit upgrade in Win 7 and see if that works.

Also, a 32 built system will often not recogize even a full 3 gig of ram. You might also try removing the 4 gig of ram and reinstalling your original ram. You didn't say which speed ram you used.