Question about GPS Devices
The power plug should go into the cradle first, before the device.. it sits just underneath in the plastic clip. once you slide the s-series unit down it clicks into the power cable aswell as the cradle and it sould all stay in place. It's designed so you can lift it up and out without unplugging the power.
Posted on Apr 01, 2008
Tips for a great answer:
Nov 24, 2010 | Navman Mio M400 Car GPS Receiver
1. Connect Navman
GPS to PC via mini-USB cable.
2. Go to
3. Go to
4. Open the
5. Open the
6. Open the
7. Delete the
following file only - 'dababase.db'
8. Close the folders
9. Disconnect the
mini-USB cable then restart the Navman GPS by sliding the switch to
'Restart' then back to 'On' after 10 seconds.
The database.db file will be generated automatically once the folder is closed.
Nov 04, 2010 | GPS Devices
Oct 22, 2009 | Navman NavPix N40i GPS Receiver
Mar 24, 2009 | Navman Tracker 5500i GPS Receiver
Dec 11, 2008 | Navman GPS Devices
Aug 12, 2008 | Navman F20 GPS Receiver
Jun 28, 2008 | Navman GPS Devices
Dec 05, 2016 | Uniden GPS Devices
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: