Question about Panasonic PT-53WX42 53" Rear Projection Television

1 Answer

Tv shuts off power light flashes 3 time remove the back and 1 transitor glows red and has number 292/2.2 symbol J

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Panasonic Master
  • 14,553 Answers

The three blink is the error code for short protection. The blue 2.2 ohm resistor is tied to the convergence chips in near it: STK-392-110.

Both chips and the burnt or discolored resistor will have to be replaced.

If you are a do it yourself person I have start to finish step by step instructions for this repair in this set.

They tell you everything you will need (Parts cost on EBAY will be under 30 dollars) and how to do the repair from beginning to end.

let me know if you think you can do it and I can post the instructions here for you.

SD TECH

Posted on May 14, 2010

  • 3 more comments 
  • tbodden910 Sep 02, 2010

    hi SD TECH, Ihave the same problem could u post the instruction,i think I can do the repair.Thanks in advance

  • marttiy Oct 14, 2010

    are you able to email the instructions? have a panasonic pt47wx54 rear projection that shuts off immediately and has the 3x blink red.
    I'd like to fix it myself and save the $400.
    please email to applyforad@gmail.com. Thank you in Advance!!

  • Dadfix Oct 30, 2010

    SD TECH - I can definitely do the repair and would really appreciate your instructions. Please let me know how I can find them or email them to me. I will send you my email if you tell me how to get it to you.

  • Ryan Gifford Jun 24, 2012

    Can someone send me this info too? I have the same problem and would like to try to fix it

  • SD Tech
    SD Tech Jun 26, 2012

    Ryan, I am on vacation but if you post a email address here I will forward the instructions---understand a lot of people see my old solutions and ask for the instructions--have in some cases had 50 or more requests --so usually only do it for the original asker---on Vacation for next 10 days or so--but have the laptop with me that has the info---give me a email address.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New bush tv cannot find code for my sky remote


Hello
Sky remote codes for Bush TV are:

246 263 377 037 064 065 310 300 383 399 391 402 547 292 239 312 609 322 339 515 236 389 035 191 232 245 288 714



1. Select any channel on the TV.

2. Point your Sky+ remote control away from the TV and press the tv button.

3. Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.

4. Input the 3 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.

5. Point the Sky+ remote control at the TV and try the volume button



If this works try the other TV functions.

If these work then the correct code has been selected.

It's important to note that not all TV functions will be supported by the Sky+ remote control e.g. Picture in Picture.


If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible
OK.

Jun 26, 2011 | Televison & Video

Tip

What to do if you have 3 flashing red lights on your Xbox 360 Console?


If you have the 3 rings of Death (3 Flashing Red Lights) on your xbox 360 console, all you need to do is to contact Xbox Support and report this issue with them. The Console has a 3 year warranty for the 3 flashing red lights. Just make sure you did the following first:

1. Power Cycle your Console (Turn it off, unplug the power adapter from the wall outlet, wait for 30 seconds, turn it back on)**This is the best solution and it usually works!!

2. If still persist, Turn it off, remove any accessories connected to it (Hard Drive, Controllers, etc.) turn it back on without those accessories. **These accessories sometimes causes the problem.

3. If removing these accessories removed the 3 flashing lights, attach the accessories one at a time, every time turning it off and attaching one and turning it back on checking each time if the red lights (any lights) appeared. It will tell you what is causing the error.

4. If all else fails, again CONTACT XBOX TECH SUPPORT on their Toll free number. Make sure that you tell the tech that you have done those things above so they can create a report for the issue. They love the 3 flashing red lights issue. I should know, I am formerly one of them. :)

on Jun 12, 2010 | Video Game Consoles & Games

2 Answers

Just replaced the lamp, worked for about 3-4 days, tv won't turn on, green light flash about 3-4 times then a red light flashes, waited about two days, tv came on and worked for about 1 month now the same...


I have the same TV and had same problem . Try taking the bulb and assembly out and reinstall , there are some sensors on the assemblies that might not be getting good contact . It fixed mine .

Jan 20, 2011 | Sony KDF-50E2000 50" HDTV

1 Answer

When I push the power on/off button on either the remote or on the television itself, I can hear the power click on, then it shuts off, then the stand-by light next to the power button on the television...


you have a defective horizontal output or the flyback is bad.
horizontal output is a big transitor on a heatsink near the flyback. the flyback is the coil that feeds energie to the bulb with a thick red cable.
be careful to discarge the bulb before removing the flyback.

Aug 26, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Power light is flashing 3 times consecutively. When hitting the power button the fan comes on then shuts back down..then starts flashing the red light again..I've recently bought a new lamp and installed...


Put lamp cover back in its place as 3 times blinking light shows lamp cover has not been fixed.
Lamp cover is first thing that you removed to replace lamp in tv, make sure it is fixed securely in its position.

Aug 13, 2010 | Sony KDF-50E2000 50" HDTV

1 Answer

Changed lamp and TV won't turn on, power light flashes 3 times


Hi,
Red light blinking 3 times shows problem with lamp cover.
Lamp cover is not fixed securely in your tv after lamp replacement. Lamp cover is first thing that was removed to replace lamp, check lamp cover and make sure its back in place properly.
Thanks.

Jul 17, 2010 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Need a Code Number to work with my Dish


1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .


This way of finder code make the remote search 1 by one , usually dvd and other things else than television dont work , but give it a try might work but probably will just power on and off not more than that but will work fine with ur tv

Jan 11, 2009 | Curtis DVD-7600 DVD Player/VCR

1 Answer

I have a Mitsubishi WD-62525. This morning my TV would not turn on so I pressed the rest button. After the Timer light stopped blinking I pressed power. I could hear the fans start than a somewhat loud...


the status light blinking red means a fan (the unit hs 4 of them) has failed. you need to determine which one. use the self diagnostic function:
Error Code Operational Check
Note:
The TV must be in “Shut Down” and not manually switched Off, to perform the Error Code Operational
Check. When the TV is switched Off, the code automatically resets to “12” No Error.
Press the front panel “DEVICE” and “MENU” buttons at the same time, and hold for 5 seconds to
activate the Error Code Operational Check. The LED will then flash denoting a two digit Code.
Note: The front panel buttons must be used, NOT those on the Remote Control.
• The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
• The flashing then pauses for approximately 1/2 second.
• The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
Example: If the Error Code is “32”, the LED will flash three times, pause, and then flash two times.
• The Error Code is repeated a total of 5 times.


and read the code.
35= Chassis Fan failure
36 =Exhaust (Back Cover) or Lamp Ballast Fan failure
37= Engine (DMD or Lamp) Fan failure

Nov 15, 2008 | Mitsubishi WD-52525 52" Rear Projection...

3 Answers

While charging my O2 atom exec, the LED (Flash light) does not glow red ?


I have the same problem. What I did several time is to actually shut down the phone, remove the battery and leave it like that for several hours (3 to 4 hours). Then, I put the battery back in the phone, and it would charge again. However, due to the long time with no battery, the phone's clock would be reset to January 2007.

I found no other work around right now. However, I have to do this more and more often, almost once a week ...

Mar 21, 2008 | O2 Xda Atom Exec Smartphone

Not finding what you are looking for?
Panasonic PT-53WX42 53" Rear Projection Television Logo

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...