Question about Dual Electronics CECT P168 Cellular Phone

1 Answer

I HAVE A SCIPHONE 9 MODELAND IT WAT COME ON OR CHARGE

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dual Master
  • 6,993 Answers

Hello,

since your sciphone won't charge or come on, then its having a power related problem.

You need to first check the battery, make sure the battery is fully charged. Maybe you should look for a friend that uses a sciphone, use your friend's battery to test your phone and see if it will power on. If it does not power on, it means the battery is not the cause of the problem.

If the phone comes on with another battery, you can go ahead and buy a new battery. But don't buy a new battery until you test the phone with another battery, in order to be sure whether or not battery is the cause of the problem, so that you won't waste your money.

If its not a battery problem, you will need to take the phone to a repair because the fault might be a software or hardware problem and I don't think its something you can fix yourself.

Good luck.

Posted on May 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Phone Hang while USB cable connects on i68 Sciphone


clean the usb connecter in ur phone

Aug 22, 2009 | Cell Phones

1 Answer

I cant recive nor send mms messages


call your carrier and tell them you need your new phone configured. they'll send a few texts to it and it'll be done.
call from another line if you can when you do this.
good luck

Jun 12, 2009 | Dual Electronics N99i Cellular Phone

1 Answer

Sciphone


your battery is dead or bad. Put a new battery in it.
If you can i don;t know about the battery.

Jun 06, 2009 | Cell Phones

3 Answers

Cant get my sciphone to work


okay turn your phone off take the back off ,battery and take the sim card out now put the battery back in with out sim card .. turn on. now go open sim and close sim 2... turn off...remove back and battery put sim card in slot 1 make sure its in all the way put battery and back on ... turn the phone on... give it a few minutes it should work....

Jun 06, 2009 | Dual Electronics CECT P168 Cellular Phone

4 Answers

I have a sciphone i68+\\ i cant connect to the


I don't know why sciPhone or AT&T don't make this information available. I had to search the net for hours but finally found out how to connect to the internet and data on an i68. Here are the steps:
***First Step***
1.Main menu --> Select Services
3.Select Data Account --> Select GPRS
5.Select the first entry
6.Edit the account name to whatever you would like
7.Edit APN to wap.cingular (lowercase)
8.Edit Username to WAP@CINGULARGPRS.COM (UPPERCASE)
9.Edit Password to CINGULAR1 (UPPERCASE)
10.Edit Auth Type. to Secure
11. Save

Select Back --> Select Back

***Second Step***

Select WAP
1.Select Settings --> Edit Profile
3.Select the first entry --> Edit Profile
5.edit the name to whatever you would like
6.Edit Homepage to http://device.home
7.Edit Data Account to the Name you established in the First Step
8.Edit Connection type to HTTP
9.The IP address is 066.209.011.032 and the port number is 8080
10.Edit Username to WAP@CINGULARGPRS.COM
11.Edit Password to CINGULAR1
Select back or done
Select Activate Account


MMS

Select Messages --> MMS --> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to WAP@CINGULARGPRS.COM (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)

Select Done or Save
Make sure to activate the profile and you are good.

Feb 24, 2009 | Apple iPhone (16 GB) Smartphone

Not finding what you are looking for?
Dual Electronics CECT P168 Cellular Phone Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dual Cell Phones Experts

William Alequin

Level 3 Expert

922 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Dual Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...