Question about Toshiba E-Studio 3511 Color Copier

3 Answers

The printer is stuck on warming up at startup.

The printer boots up fine and then stays at warming up please wait. The buttons on the lcd are unresponsive except the copy botton.

Posted by on

  • mark_kisinja May 18, 2010

    I have tried shutting down the printer and unplugging everything and then restarting it agan but i still get the sane problem. "wait printer is warming up"

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you do a reboot/warm reboot??? I can't find an answer anywhere. Thanks!

Posted on Sep 30, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 679 Answers

Since the copy button works I would eliminate the printer from the equation. First remove the software from it's own uninstaller "if possible" or go into add/remove programs in the control panel and remove it. Then re instal it being mindfull of any questions or extra features it may ask you. Reboot and retry. If it still isn't working make sure you have drivers for the operating system you are using, and that it's not being blocked by your firewall or virus program. Sometims if a device connects to the internet in order to function it gets blocked by either windows or third party software. The warming up issue is just telling me that it's not working, nor necessarily that it's waming up. Let me know if this doesn't work and we can try something else. Also make sure you do a windows update if you are using windows. And also try another port, sometimes some usb ports are finicky so lets eliminate that too.

Posted on May 18, 2010

  • George Bill
    George Bill May 18, 2010

    Also if you are on a network or using wireles, Like mine. You may have to enter the password "like a wirless device" in order for the network to recognise the printer.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 881 Answers

Try to disconnect cable plugged into your copier including the power chord. Leave it like that for around 5 minutes, and then put everything back to its place. That shoulddo the trick.

Posted on May 14, 2010

  • kid_ant
    kid_ant May 14, 2010

    i mean all cables...

  • mark_kisinja May 17, 2010

    i tried that but it didn't work.
    Any other suggestions?
    Thanks


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Acer LCD Monitor shows the , auto Configuration menu and is on a black screen.


How did the auto configuration came about? Try pressing the buttons before powering up. Maybe some of it are stuck.

Feb 21, 2015 | Acer AL1916W 19" LCD Monitor

1 Answer

STAYS ON RED AND KEEPS SAYING PLEASE WAIT AND REVERT BUT NOTHING HAPPENS


What kind of machine? This type of error would suggest that the machine is not able to complete the self test on startup.

Dec 07, 2014 | Office Equipment & Supplies

1 Answer

Stuck at "please wait"


If you go into the main menu you will find an option to set all parameters back to "Factory Default" I would start there. Then check for any updates online.

Aug 10, 2013 | Brother DCP 7065DN - Multifunction ...

1 Answer

Toshiba laptop restarting


The loop on your Toshiba Satellite laptop refers to the computer not booting properly.

During the loop, the computer will try to boot the Windows operating system and keep restarting over and over again.


This is not a hardware issue with your Toshiba Satellite A106.

The issue resides in the startup files on your computer's hard drive.


You can fix this by running a repair tool that comes with your Windows operating system.

This repair tool will fix your startup disk and allow you to get your computer back up and running.


Insert your Windows 7 installation disc into your computer's optical drive.


Start your computer and wait for it to boot from the install disc.


Choose your language from the menu and then click the "Next" button.


Click "Repair your computer" from the menu.


Choose the operating system you are using and then click the "Next" button.


Click on the "Disable Automatic Restart On System Failure" button to disable the startup loop.


Click the "Startup Repair" tool from the menu and wait for the computer to fix your startup disk.


Wait for the computer to finish repairing your startup disk and then allow it to restart automatically.


Wait for the computer to boot correctly to your login screen.


Hope this helps


How to Create a Windows 7 System Repair Disc:


http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html


"This will show you how to create a Windows 7 system repair disc to use to boot to the system recovery options if you don't have a Windows installation disc, can't find your


Windows installation disc, or can't access the recovery options provided by your computer manufacturer."

or
If you do not have access to either disc: Windows 7 - Repair Disc download
http://neosmart.net/blog/2009/windows-7-system-repair-discs/

Oct 23, 2012 | Toshiba Satellite M35X-S311 Notebook

1 Answer

Error 311 Printer stays off line


its worth trying this aswell:

1, Power off the printer

2, Unplug the printer's power cord, wait 5 seconds then replug the power cord in.

3, Hold the Power button for 6 Beeps

4, Release the Power Button

This will reset the printer and should resolve incorrect cartridge detection problems
please rate my answer

Jan 11, 2011 | Canon PIXMA MX860 OFFICE AIO-2.5IN LCD...

1 Answer

Upon startup after hard password reset, server status stuck on "Working..."


Your image is corrupt from an improper shut down. I had the same problem. Reinstall default .TIB and it will boot fine.

Jun 22, 2008 | Toshiba Magnia SG20 Server

1 Answer

Canon CLC 2400


go into service mode and clear ram remember to copy the values before clearing or your dc controll is damage

Nov 29, 2007 | Office Equipment & Supplies

1 Answer

Frozez LCD Screen


hi im jules_09,theres a problem with the copier because ussually after turning it on it warms up for seconds or a minute,but when it freeze at wait the warm up time is too long,see if if you can get the error code,if there is a error code it the lcd check how long is its warm up time.if it take too long.if you can repair it check the voltage at the power supply board going to the main logic board.

Nov 05, 2007 | Canon imageRUNNER 8500 Copier

2 Answers

Printer will not finish 'booting up'


remove the power cable directly from the back of the printer, press and hold # and 9 while holding both these buttons put the power cable back to the printer. now let the buttons go when the on light starts flashing

Dec 28, 2006 | HP OfficeJet 7410 All-In-One InkJet...

Not finding what you are looking for?
Toshiba E-Studio 3511 Color Copier Logo

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

628 Answers

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

102 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...