Question about Apple iPod nano

1 Answer

The screen is all white, will not display anything.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Apple Master
  • 7,482 Answers

Apple suggests that you ensure your iPod is charged before following the next step. How exactly you check a charge on an iPod screen that is completely white has yet to be revealed. But hey, give it a shot
anyway. Plug the iPod into a high-powered USB port, let it sit for 2 hours, then disconnect it. If you have a wall charger, plug in the iPod, then follow these steps while it is still plugged in.
1.Turn the Hold switch on, then back to off.
2.Press and hold the Menu and Select buttons until the Apple logo appears
3.Immediately switch your figures to press and hold the Select and the Play/Pause buttons until "Disk Mode" appears at the top.
For a lot of people, this solves the problem. Connect the iPod to the computer and (assuming it shows up) reset the iPod again to get it out of Disk Mode. If at this point you still have the white screen,restore the iPod using the restore function in iTunes under the Summary tab (this will erase everything on the iPod and put it at factory settings).
Don't disconnect or eject the iPod until the store is totally done.
After you think it's done, wait another five minutes.
I hope this helps
Please rate me

Posted on May 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light/white screen display


Most likely a bad LCD display. Please see this link:


http://www.sharc.net/gps_LCD_repair.htm

- Jim

Jul 24, 2010 | Garmin Nuvi 350 Car GPS Receiver

1 Answer

My screen is completely white. It still responds to touch but I can't see anything.


Hello,

You caanot see anything on the screen because the screen is bad.

Since the screen of your phone is not displaying anything, it means the screen of your phone is bad.

All you need to do is to get a brand new screen on your phone in other to let it display or let you see something.

I strongly advice you go with your phone while going for the replacement of your screen in other to get the exact screen and a working screen.

Take care.

Apr 20, 2010 | LG GW520 Cell Phone

1 Answer

Dropped my camera,screen is white and wont display anything


Try and remove the batteries and wait then a few minutes, then reinsert them and see if that works.

Jan 16, 2010 | Cameras

1 Answer

Screen is all white


the display screen is faulty have an expert change it for you

Nov 07, 2009 | Computers & Internet

1 Answer

White screen on the display Can't see anything else except white screen. Front screen is a jumbled mess.


Your screen's wire in the phone was most likely diconnected from a fall or many falls. the front screen sounds like the same thing.

Jun 26, 2009 | LG VX5300 Cellular Phone

1 Answer

Screen goes blank (white), sometimes screen display will get big


You can update graphics driver, if that does not fix the issue check the display on external monitor. If the external monitor works fine you can isolate checking the display in BIOS Setup scree (Restart your computer and keep tapping F10 to getinto BIOS). If the same issue in BIOS, you may have to change display of the unit.

Jun 26, 2009 | HP Pavilion TX1320US Tablet PC

2 Answers

No display


it is a display problem, just visit a nokia service centre and get a check up of it, and u will have ur running phone

Jun 02, 2009 | Nokia N70 Cellular Phone

3 Answers

My Sony Ericsson W580 just shows a white sceen an i cant go to anything else


More than likely you will need to replace the display screen but before you do take the screen out and reseat the LCD connector. This will sometimes fix a white screen.

If not, a new LCD screen runs about 15 dollars shipped from eBay and is pretty easy to replace.

Check out the following link for instructions on replacing the LCD display and links to buy the screen.

Sony Ericsson W580i LCD Display Replacement

I hope that helps you out

Mar 22, 2009 | Sony Ericsson w580i Cellular Phone

1 Answer

My ipod nano 2nd gen's screen won't display anything..


I have had this problem recently myself and would like you to know that it is possible to fix. The white screen error or otherwise known as "white screen of death" is caused by the lcd color screen on the ipod itself. That is why its functions still work but the screen does not. Once you replace the color screen it will be as good as new.

Dec 06, 2008 | Apple iPod nano

Not finding what you are looking for?
Apple iPod nano Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

kakima

Level 3 Expert

102366 Answers

TO Lady

Level 3 Expert

638 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...