Question about Zyxel ZyAIR G-570S - Wireless access point - 802.11b, 802.11g, 802.11 Super G (ZY-G570S)

2 Answers

Can not access the 192.168.1.2 ip - Zyxel ZyAIR G-570S - Wireless access point - 802.11b, 802.11g, 802.11 Super G (ZY-G570S)

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 83 Answers

Hey achek76,

I would assume you are trying to reach for router configuration page via your internet browser.

The first step I would take it to confirm this is indeed the correct address for such a page. In order to do this follow these steps:

  • Start >
  • Accessories >
  • Command Prompt or CMD
Once opened you should have what looks like a black box that you can write text in. Write in the following command:
  • ipconfig
Once this command is wrote you should get output that looks like this, along with some others but we are only worried about one and that's the default gateway which I have made bold. This will be the address required to reach your router configuration via your internet browser. (Ignore the address you see here as they are mine and are no use to you.)

Windows IP Configuration


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . :
IPv4 Address. . . . . . . . . . . : 172.16.121.51
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 172.16.120.1

If you confirm you are using the correct browser I would then proceed with resetting your router via the small pin hole located on the back, this will restore it to factory defaults and maybe clear up any problems the router is experiencing.

Once reset run the command I mentioned above and check your default gateway again and type that IP into your browser to access your router configuration.

Hope this helps!

Thanks for using fixya!

Posted on May 14, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 126 Answers

Any queries regarding Ip-details, please log in to, http://www.ip-details.com/ which gives you the latest information and a accurate solution for your search.

Posted on Aug 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find IP address 192.168.1.2


Your IP address 192.168.1.2 is a Local IP address. Local(Computer) IP address ranges from 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, 192.168.0.0 to 192.168.255.255. Normally you can login the Local IP address within a single building (or) campus using LAN. If you need to access around the world, it should be a Public(Network) IP address. To check your Network IP address, visit IP-details.com .

Apr 16, 2013 | Zyxel Wap3205 Wireless N Access Point -...

2 Answers

EOC-3220 connects but no internet access


What are you using for Internet connects? do you have the Access point connected to a Router. or is it connected to the Cable or DSL modem. I will need more information to complete this. If you have a router is is set to give an IP address or do you have a static IP? If it is set to give a Dynamic ip change the access point to recieve ip address from router and same with computer. If your connected directly to the Modem with the access point and you only have one IP address it will be used by the access point and not allow the computer to connect.
for more help please provide your internet (DSL, T1, CABLE) if you have router,  how it provides IP, and how access point is connected to it.

Oct 31, 2007 | EnGenius EOC-3220 (EOC3220)

2 Answers

192.168.0.1


Try this.
http://192.168.0.1

Mar 14, 2013 | Computers & Internet

2 Answers

Dap 1160 Problem access web admin page


connect device directly to your computer using Ethernet cord. try to release and renew IP from the command prompt
IPCONFIG /RELEASE
IPCONFIG /RENEW
IPCONFIG /FLUSHDNS

then perform ipconfig. From there you will be able to get the IP address of the access point that you will need when accessing web admin page

Dec 22, 2012 | D-Link DAP-1160/B ACCESS POINT, WLESS G,...

1 Answer

I have problem setting up my wireless network and redirecting my wireless client to my local webpages before they can access to internet.   see this diagram below :...


you need to replace your modem with a router that is capable of running Network Address Translation. You are trying to route private IP's (192,168.x.x) over the public IP (internet) network.

Jan 31, 2010 | Microsoft Windows 2000 Professional for PC

1 Answer

Setting up a wireless network access point for a Belkin F5D6130


Go to default IP.set the new IP relevant to your network ip's.

Set the ip and DNS in wireless router then only you can access the internet

Sep 23, 2009 | Belkin (F5D6130) 802.11b Wireless Access...

2 Answers

Configure access list in cisco router 3600


connect with console and go to the interface.
put
access-list (any no like 101 etc) deny ip (source ip / ips) (destination)

Aug 19, 2009 | D-Link 802.11g Wireless Router WBR-1310...

5 Answers

JN763. Access rejected from your IP address.


JN763. Access rejected from your IP address

Jul 27, 2009 | Computers & Internet

2 Answers

Pix 515 E allow few websites only.


Do the nslookup for the three websites and write an access list to permit the traffic only to the said website ip addresses

Eg.

1. go to dos prompt

2. type "nslookup"

3. type "www.rediff.com

Note : You will get the ip address of the websites

4. Create an object group for these websites

5. Add ip addresses of the websites

6. create an access-control list element to permit the traffic from your circle office to this object group for port tcp 80 and 443

You are done

Mar 09, 2009 | Cisco PIX 515E Firewall

Not finding what you are looking for?
Zyxel ZyAIR G-570S - Wireless access point - 802.11b, 802.11g, 802.11 Super G (ZY-G570S) Logo

1,285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mark

Level 2 Expert

107 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...