Question about Computers & Internet

1 Answer

Changing cable port

I have a lcd monitor came from japan and its quite different because its display cable is not VGA nor DVI. It's a digital cable,

i just want to ask if theres cable converter to it. A cable that has to cable ports, the other one is for the digital and the other one is for the DVI or VGA cable. So that the lcd monitor can now have a CPU set.
any answer is highly appreciated.

Posted by on

  • 2 more comments 
  • joecoolvette
    joecoolvette May 16, 2010

    CPU stands for Central Processing Unit, or Microprocessor. Processor for short. Not computer. I need the Manufacturer name, and Model Number of the LCD monitor. Also, are you acquainted with the HDMI connector?http://en.wikipedia.org/wiki/HDMI (Post back in a Comment)

  • l3wlz May 16, 2010

    hi thanks for your reply, i think youre confuse of the term CPU set. What i think of CPU set is the motherboard, videocard, PSU, HSF, PROCESSOR, RAM, etc.

    this is the link to the LCD monitor and its display cable wire. pls. reply. http://translate.google.com.ph/translate...

  • l3wlz May 17, 2010

    guys thanks for your reply. i really appreciated it, so can i use different CPU set using DFP?? where can i find this kind of DFP that will fit my cable.


  • l3wlz May 17, 2010

    guys thanks for your reply. i really appreciated it, so can i use different CPU set using DFP?? where can i find this kind of DFP that will fit my cable.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,660 Answers

The monitor is a Fujitsu VL-15DX5G. 15 inch LCD.

The monitor cable uses a female DFP20 connector.
(Display Port 20-pin)

http://auction.thumbnail.image.rakuten.co.jp/@0_auc/image50/cb/4a/00010523850/a1/85/img00149858603.jpg

So you need a male DFP20 to male DVI-D adapter, or adapter cable.

DFP20 Male to plug into the monitor cable, and Male DVI-D (Dual) to plug into the graphics card's, female DVI-D connection.

So far, all I have found from a quick search is a Male DFP20 to Female DVI-D adapter, such as this example,

http://www.worldofcables.com/store/viewitem.asp?idproduct=768

Of course this won't do.

IF, this is all that's available for DFP20 adapters, you'll need an adapter of Male DVI-D to Male DVI-D, also. (Yes, I am aware of how crazy that sounds)

(It would appear, adapters are sold to connect a normal DVI-D monitor cable, {Male}, to a computer with a female DFP20 connector)

Should your searching only find DVI-D female to DFP20 male adapters, or adapter cables, then here is an example of a DVI-D male to DVI-D male adapter,

http://www.kvconnection.com/product-p/m-sgc-dvid-mm.htm

(DVI-D male to DVI-D male cable would probably be better as there would be less strain on the graphics card's DVI-D connection)

Posted on May 16, 2010

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is vga/dvi cables


VGA and DVI is in the way the video signals travel. VGA connectors and cables carry analog signals while DVI can carry both analog and digital. DVI is newer and offers better, sharper display compared to VGA. You can easily tell them apart because VGA connectors (and ports) are blue while DVI connectors are white. Click the link below to see an image of them.
http://www.hardwaresecrets.com/imageview.php?image=8131

May 28, 2014 | Dell E172FP 17" LCD Flat Panel Monitor

2 Answers

2nd monitor does not work with DVI to VGA converter cable. My video card has VGA and DVi ouputs.


The problem could be in the adapter to the video card. There are different types of DVI connections. If the adapter does not have the proper set of pins then the card will not recognize that a monitor is connected at that port. Monitors themselves have no bearing on whether a single or dual monitor set up will work or not. Digital Visual Interface Follow this link, it may help you determine if the adapter you are using is correct for the graphics card.

Apr 22, 2014 | Acer ET.CV3WP.E05 LCD Monitor - V193WEJb...

1 Answer

Can i get an adapter for my emachine monitor to go into a dell desktop ...my lead i have now doesnt fit as unable to screw it in


YES.

I believe it is time now for the guessing game............

1) Is the monitor about so high, and so wide?

2) Does the monitor look like a small TV, or is it flat in appearance?

3) What does the monitor cable look like?

4) Is your hair Brown, and do you smoke cigarettes?



NO.............just wanted to see if you were following along! Geez!



An Analog monitor, such as a CRT type of monitor, uses a VGA cable,

http://www.wisegeek.org/what-is-a-crt-monitor.htm

http://en.wikipedia.org/wiki/VGA_Connector

Scroll down a little for a VGA Cable example.

Flat LCD screen monitors are Digital.
Some may have a VGA Cable attached, but the best cable option is a DVI cable,

http://en.wikipedia.org/wiki/Digital_Visual_Interface

(Click on any photo on those two Wikipedia pages, to enlarge)

Using these two examples, does one apply to the eMachines, and one apply to the monitor?

Let us say the monitor has a DVI cable.
The eMachines Desktop PC has a VGA port. (Connector)
For this you would simply use a DVI to VGA adapter,

http://www.directron.com/dviadapter.html

Now notice...........this is a VGA MALE to DVI FEMALE.

The DVI cable on the flat LCD screen monitor, has a male connector.
The contact pins of it go into socket holes, in the DVI end, of the DVI to VGA adapter.

The VGA port on the eMachines, has socket holes.
The male VGA connector end on the DVI to VGA adapter, has contact pins.

Point?

Make sure you get the correct DVI to VGA adapter.
There is a male DVI to female VGA adapter, also.

This is just one example.
For instance I'm using an HP 2009M 20-inch widescreen monitor, AND an RCA 26-inch HDTV, as dual monitors.

Presently using the HP 2009M with a DVI cable, and the RCA L26HD31 HDTV with a VGA cable.

(I'm also using an ATI Radeon HD5450 graphics card. Pretty 'pud', but it does OK for what I want)

Primer;
A computer sends out a digital signal. To get the best graphics quality, you ideally use a monitor with a digital cable. (DVI, etc)

When you use an Analog monitor on a computer, the computer has to change the digital signal down to an Analog one.
Therefore the graphics quality is not as great.

Digital cable technology now, is DVI, HDMI, Display Port, and Mini-Display Port. And some others I'm sure I've forgotten.

http://www.hardwaresecrets.com/article/Video-Connectors-Tutorial/157

For additional questions please post in a Comment.

Also post what the monitor manufacturer name, and model number is. (Look on the back)

Are you using the VGA connector on the motherboard, (Back of computer), or do you have a graphics card installed?

If you have a graphics card installed, what is the manufacturer name, and model number?

Regards,
joecoolvette

Mar 06, 2013 | Dell Dimension 4300 PC Desktop

1 Answer

Link ASUS laptop to Sharp Aquos LCD TV


No, a DVI to VGA adapter will not work. (The TV is looking for the digital signal from a set top box. This is different from the analog signal on the VGA cable.) You need a converter. Your best bet would be a VGA to component video converter. (I am assuming that the Sharp TV has a component video input.) This page has some examples: http://www.ramelectronics.net/audio-video/video-converters/vga-rgb-hv-to-component-video/c10000-c11200-c11215.html?sorter=productname-en-asc . Note a VGA to component video cable will not work. The VGA to component cables are for projectors that read the RGB signal. The component video signal is YPbPr.

Connect the VGA cable to the converter and the component video cable to the TV and the converter with the computer and TV off. Turn on the TV first and set it to the component video input and then turn on the computer. Then (assuming the VGA port is enabled - adjust in the BIOS if needed) set the computer's video output to the VGA port. (On my Windows 7 laptop, this can be done by right-clicking on the desktop. Choose Graphics Properties and set the display to the external monitor or both. Click Apply and then confirm the change (on the external monitor if using the single monitor). (VGA to Composite video converters also exist if you do not have an available component video input on your TV.)

If your computer is fairly new, you may have an HDMI port. Your TV may be able to read the signal with a DVI to HDMI cable. (It depends on the TV. Not all of them will read the computer's signal on the DVI port. Check the documentation for your model. TVs without a VGA port are less likely to support this feature.)

I hope this helps.

Cindy Wells

Nov 28, 2011 | Televison & Video

2 Answers

What cord do I need to connect my 1810 gateway monitor to my tower


Your either going to need VGA or DVI. You need to check the back of your computer and monitor to see which type of connection you have. Then plug in the appropriate cable.


Pic of VGA cable: http://www.ccrzone.com/attachments/Image/VGA_M-M_6_.jpg
Pic of DVI cable: http://farm4.static.flickr.com/3216/2995518986_9deb622bff_o.jpg

Jul 19, 2011 | Gateway FPD1810 18.1" LCD Monitor

1 Answer

I have a dell dimension 3000, bought a new HP 2310E monitor with 3 ports. DVI, HDMI & display port. Told to buy a cable with VGA to connect to dell and DVI to connect to HP Monitor display port....


Hi sshorne9780,

I see that you are having a check input error on the Monitor/LCD that your are connecting to your Dell tower, please see steps below.

  • On your HP 2310E make sure that your HP is set to the input/source that you are using and make sure that you only use one type of video cable for the issue.
  • I see that you mentioned that you have a VGA cable and a DVI cable, you can only use one type of cable for a video connection.
  • VGA would be the Blue tipped cable connecting to the tower and going to the LCD monitor.
  • DVI this is a black cable connecting to a white port much bigger than a VGA port and is rectangular in shape unlike the VGA
  • moz-screenshot.pngmvincentc_34.jpg
  • and on your LCD monitor check the input type to see video from the tower.
  • everything seems to be OK you just need to change the input of your LCD monitor for the video to show up on the screen.
  • also if you are using HDMI for the video u will need to change the setting of your Audio and set HDMI as the Default to have Audio come out from the HDMI connection together with video, the HDMI viedo will automatically be detected as long as the LCD monitor's input is set to HDMI.
I hope that this will able to help resolve your concern.

Thank you for choosing Fixya,

mvincentc

Apr 18, 2011 | Dell Dimension 3000 PC Desktop

1 Answer

I have HP Pro3000MT, and it has vga and dvi port. I want to use dual monitor for this pc. the monitor are HP LCD and it only has vga input. first i use vga port, secondly i use this dvi cable to connect to...


you need a dvi to vga adapter not a dvi to vga plug and you must also go into your graphics card setup catalyst control center if its ATI Nvidia Display manager for Nvidia if you boot the computer with it pluged in and you can see the boot screen on bolth displays then its an os thing just right click and select the display manager the activate all display's through the managers

Apr 01, 2011 | HP SmartBuy Pro 3000 MT Pent Dual Core...

1 Answer

Dvi-dvi connection to a ati radeon hd4670 does not recognise monitor,ie no display. Using a supplied adapter dvi-vga and a vga cable their ia screen display but in device manager it is a generic monitor?


Was there an installation disc that came with it in the package? Some monitors require software to be used. If you don't have the installation disc, you will most likely find the necessary software on the manufacturer's support site: ProLite Support Driver Download Site.

If the monitor software doesn't solve the problem, try using a different DVI cable. More often than not, these types of problems can be traced back to a faulty cable or port. If the DVI port on the monitor is bad, you will have to use the VGA port as you are now or replace the monitor.

If the DVI port on the video card is bad, you will need to replace it. A good way to test this is if you have another monitor with an available DVI port you can connect to the video card.

Hope this helps! Good luck!


Aug 10, 2009 | iiyama ProLite E481S-B 19" LCD Monitor

2 Answers

Monitor says No signal digital


Is ether the monitor or video card uses both DVI or VGA port. There may be a switch on the graphic card that changes it from DVI to VGA, often outside the card.

Also is the computer monitor set to the right setting if it can use both VGA and DVI, if using DVI (of any type) it need to switch to digital, and if using VGA it need to be set to analog. This may be a physical switch or using the settings button. (see manual how to change them)


PS: VGA port is a blue D shaped port with 15 pin holes, and DVI is a white rectangle port with one port being a line.

Mar 17, 2009 | ViewSonic VG2030wm LCD Monitor

2 Answers

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.
You have failed to specify wheather or not your LCD Display is under Warrenty.

Perhaps these simple trouble shooting procedures will get the job done.

1. use the DVI to VGA adaptor that came with your card

Plug in a regular CRT monitor to the Primary Display Output Port using the DVI to VGA adaptor
( either port can be designated as the primary by you )
I like to use the Port nearest to the motherboard as the Primary

2. plug in the your LCD monitor on Secondary Display port using your DVI cable

At this point you should be able to see your desktop on the Primary CRT Display

3. Go to the display properties and use the Nvidia Dual Display Setup Wizard

set both desktops to CLONED at a resolution of 1024x768 and set the refresh to 60Hz
which is default for most LCD displays , some have higher refresh rates , consult your user manuel

If the display resolution and refresh are set incorrectly for your CRT or LCD you will see
Signal Out of Range ( if the display has the ability to display that error message )

At this stage both displays should be showing a Windows Desktop

If you now see your desktop on both displays , you can now put the LCD on the Primary Port



No Signal Detected ( this means the display device is not receiving a signal )

If your LCD display is still displaying the error message
"No Signal Detected" after performing the trouble shooting proceedures
You may need to read the user manuel about how to enable DVI signal input.

If you are certan you have done everything correctly but still see only "No Signal Detected"

Your LCD Display may need replacement

Loch Hime :-)

Sep 14, 2008 | BenQ FP71E 17" LCD Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...