Question about Whirlpool SB160PEE Gas Single Oven

1 Answer

SF114PXSBO Whirlpool Gas Oven won't heat

Our oven just stopped working. I used the oven Thursday and then tried to use it today (SAT) and it appears that it is pre-heating, but does not heat at all. Everything else seems to work. The range is igniting just fine - so I know it is getting gas. A workable solution would be appreciated.

Posted by on

  • 4 more comments 
  • blessed7x7 Mar 30, 2008

    Dawnn,

    Thanks- I will try that and let you know how it goes. I appreciate you! :D

    Blessings,

    Melissa

  • blessed7x7 Apr 01, 2008

    That seems to have fixed the problem, except when we turn off the oven the gas still hisses for a few seconds. Is this because we are not letting it preheat all the way, or did we do something wrong?

    Thank you,

    Melissa

  • sardie Jun 24, 2008

    We are having a similar problem with our oven, we turned it on to pre-heat and didn't notice a problem until the timmer went off and then we realized it had not heated up at all. We've tried a few times now and it doesn't even sound like the oven is even igniting...help!

  • Anonymous Sep 21, 2008

    oven wont heat

  • Anonymous Mar 05, 2009

    the oven wont heat. It smells of gas for a few mins and then a very small flame will start.

  • dpylant Mar 27, 2009

    Oven will not heat. I can't find my model number but it's close to the same model as shown. My model number is Whirlpool SB160PEXB-1.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

Your ignitor is bad, the thing that glows in the broiler compartment. two 1/4" screws and one plug, simple fix. you can do it. just call a local parts store with model # and brand,

Posted on Mar 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hav whirlpool accubake.oven wont stay lit.it ignites then flame goes right back out


Whirlpool oven won't light - Appliance Repair Forum

forum.appliancepartspros.com/oven.../225907-whirlpool-oven-wont-lig...

May 19, 2011 - 10 posts - ‎2 authors
I have a Whirlpool Accubake oven (SF362LXSS0) that doesn't seem to be consistently turning on, and the problem's getting worse. ... If I try to turn it on to bake, I hear several clicks, but not that "gas oven turning on" sound and no heat comes out (but a slight smell of gas is ... Whirlpool Gas Oven won't stay lit
1 post
Oct 25, 2012
whirlpool oven won't stay on
1 post
Aug 13, 2012
Whirlpool Gas Oven Will Not Stay Lit
2 posts
Jun 20, 2012
whirlpool accubake oven will not stay lit
1 post
Nov 9, 2009
More results from forum.appliancepartspros.com

Whirlpool Accubake Model # GW395LEGQ4 - Oven won't Start ...


Dec 12, 2015 | Stoves Ovens

1 Answer

Jenn air gas oven won't light off/heat up


Thanks for choosing FixYa and welcome. you have a electric oven or a gas oven that won't heat or doesn't heat properly, here are some things you will need to check. The most likely cause of a oven not heating correctly is a defective heating element. You have two types of heating elements in your oven. The bottom element(s) are the baking elements. The element(s) on the top are the broil elements. If you don't see the bright red glow from the element, chances are they are not working or not working correctly. If a heating element is bad, you need to replace the entire element. If your oven is warm and not correctly hot, one of the elements may be bad. In most ovens, when you preheat, both elements are used. This would make the oven to appear like it is working correctly but it is not. If the elements are not working, they might not be getting power. Test the wires to the elements with a voltage meter to make sure they are getting power before you decide to change them out. Many electrical ovens have a sensor that monitors the oven temperture. Ovens that have this sensor usually contain a digital display on the oven. The sensor could be defective. Those without the sensor use the basic mechanical system to control the oven temperature. You also want to check the thermostat sensing bulb. Make sure the bulb is good and has not come loose. Now, if you have a gas range oven that doesn't heat properly, first, you want to check your bake igniter. It may have burned out or it could be not working properly. It will be located near your burner. It is also possible that you are not getting gas to the burner. If so, it may be the gas safety valve or the igniter. You need to check your selector switch and thermostat as well. They may be defective. Always make sure you test the parts for power with a voltage meter of some type before you decide to change the part. If you have a part that appears to not be working, it may not be getting power because of a bad wire or broken connection.

Jun 13, 2011 | Jenn-Air Ovens

2 Answers

My 3 year old barely used Whirlpool Gas Oven has stopped heating. The gas stove top still works. Whirlpool customer service told me to clean out the gas chamber with a pin...there's nothing TO cleanout....


Just had a repairman here today March 31, 2010 for the same problem. $350 repair bill. There was a short in the gas valve that cause it to go bad and it also blew out the ignitaion computer board. Forget about replacing the ignitor. I already did and that was not the problem. So the qauestion for you is pay for the repair or buy a new stove.

Mar 03, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

2 Answers

The oven will not light on my Whirlpool gas oven Mod SF368LEPQ 2. The stove top burners still light.


Sounds like you need an bake element ignitor if the bake doesn't work but if the broil also doesn't work, it could be the electronic clock/timer control. the part number for the bake ignitor is 8054129 .Best off to call a reliable service company such as Sears.

Jan 31, 2010 | Whirlpool Ovens

2 Answers

Whirlpool Accubake Super Capacity 465 gas range. Oven won't light


Some gas ranges may take 10 or so minutes to light.
Other than that you may have a defective glow bar ignitor.
If it glows and does not light the reistance in the ignitior has failed.

Feb 25, 2009 | Ovens

1 Answer

Oven does not heat. Broiler and stove work. NO gas smell.


could be the oven thermostat, get a plumber/heating engineer out, but make sure you can trust him, cause he could try and say u need a new cooker when it MIGHT only be a new oven thermostat.

Feb 02, 2009 | GE Ovens

1 Answer

Kenmore gas oven won't heat up


If your ignitor is coming on that means the oven control is supplying the power to the ignitor and gas valve. So the gas valve is ok because it is allowing for a complete circuit so what the heck is wrong? The ignitor MUST draw 3.5 amps in order to open the gas safety and allow the gas to come out. The ignitor must be very bright, if it is dim then it is bad. (MORE)

Jan 18, 2009 | Whirlpool SB160PEE Gas Single Oven

2 Answers

Re: my whirlpool digital oven


The red key sign is a lock against children. To cancel it you have to hold the two buttons at the same time for 5 seconds (you activate it the same way).

The STOP sign appears after the cooker switches of after a power cut. You just have to press the left button, and, using the right knob, set the time.

Jun 24, 2008 | Ovens

2 Answers

Whirlpool gold accubake oven won't re-ignite


i have a whirlpool gas accubake range and only two burners will ignite. The other two burners make a clicking sound and release gas but never light. I have to use a match to light the other two burners and the flame is uneven on one. What should i do?

Feb 18, 2008 | Ovens

Not finding what you are looking for?
Whirlpool SB160PEE Gas Single Oven Logo

Related Topics:

629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...