Question about iLO 3200 32 in. LCD Television

1 Answer

ILO 32" LCD

I would like to mount this on the wall. There are 4 holes in the rear but any screw that I use to see if these are the mounting holes are too small. How do I find out if this is wall mountable?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Yes it is mountable. the 4 bolts are metric size is 6mm -1.0 x 40 mm
Use are large tv wall mount unit and buy the bolts seperately. I just hung mine and the
only problem I am having is I cannot remove the table top mount off the bottom of my TV

Can you halp??

Posted on Oct 23, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i wall mount my 32" LC320SS8 sylvania tv by the 4 screw holes in the back of tv


Yes, with a mounting kit. A plate screws to the TV using those holes, then attaches to another plate that's attached to the wall.

Jul 06, 2011 | Sylvania LC320SS8 32 in. LCD Television

1 Answer

Trying to figure out how to convert the base to a wall mount since it appears that it is set up to do this.


first get a wall mount kit. ikea sells them cheaply.

there should be 4 screw holes on the back of the screen. screws goes in there.

first drill 2 holes on the wall
mount the ikea kit using expanding bolt
then screw in the ikea kit on the monitor
just hang the monitor on the wall side.


but..... 15 inch is a bit smallish for wall mount... dont ya think?

Jul 01, 2011 | AOMNI Corporation Magnavox 15MF605T/17 15...

2 Answers

Hi I have a digimate tv model modl lt321c2m1 and I am wondering if I can mount it on the wall. Can I?


Please look on the back, there should be 4 mounting holes (for Metric screws) Iin what is called VESA mounting pattern. Just measure the pattern.
http://en.wikipedia.org/wiki/Flat_Display_Mounting_Interface

When you buy the mounting bracket, it will come with a bag of Metric mounting screws to attach your TV to the bracket.

Jun 13, 2011 | Digimate DGL32 32 in. LCD Television

1 Answer

How to mount a conia CL3201HDR on the wall, no screws in box and not sure what thread size to purchase.


You need to purchase the wall mount separately. They range from a simple "on the wall" mount to swivels and extending mounts, and can be very expensive for the fancy features.

First, make sure your set is wall mountable. In the center of the rear of the set there will be a square arrangement of bolt holes. I do not know of any newer sets without them, but it does not cost anything to take a look and make sure.

Next, you need to decide on a mount. Personally, I did not want to spend allot, so I found a very inexpensive, yet good quality, "straight" mount at Sears for around $25.00. It does not extend or swivel, but all I wanted was to get it on the wall. Different screws and bolts were supplied with it and I was able to match up what worked for the back of my set.

Now, THE MOST IMPORTANT PART!!!!!

You ABSOLUTELY MUST find where your wall studs are! This is CRITICAL! DO NOT use any kind of expanding bolt to mount your set or it will eventually come loose and FALL!

I had an inexpensive "stud finder" (around $10-15) to show me where the wall studs are... Sears sells them too....You want to bolt your TV wall mount to the studs using 1/4" stud or lag bolts (they look like oversized wood screws) for maximum strength, if your mount will accept bolts that thick. Also use flat washers on the bolts. If your TV mount has its mounting bolt holes too wide apart for bolting to a standard 2" wide stud, mount a 6X6" piece of 1/2 plywood through your wall to the stud, using at least 4 #10 deck screws...it may be overkill, but it will be secure... my personal saying is, "If I can't hang from it, neither can my TV!" This is critical if you want to use a fancy swiveling mount that extends out since it will add stress to where you bolt it to the wall.

My mount was in two pieces.... a section that bolted to my wall, after I mounted a piece of plywood as I described above. This piece has a large pin that sticks up, and the part that mounts to my set (with the screws provided by the manufacturer of the mount) has a receiving hole that slides over the pin. When I need to take my set down, I simply lift it straight up.

I hope my long-winded solution did not bore you, and I wish you the best in hanging your set. Please take a minute and rate my solution.

VA

Jan 30, 2011 | Televison & Video

1 Answer

Will it fit a universal fit wall mount


Most of these will. You san see the screw mounts on the back of the set and compare them the wall mount spand holes. I have mounted 19" RCA LCD Panels so I have got to believe this 32" should be able to mount on most universal wall mounts.
I hope this helps,
Skyassoc

Dec 11, 2010 | RCA L32HD31 32 in. LCD HDTV

1 Answer

How do i mount tv to wall


What type of wall mount would I need for a 32in Emerson LCD320EM9 HDTV LCD. And how do I mount it to the back of the TV. TV on back only has two holes for screws?

Nov 26, 2010 | Emerson LC320EM9 32 in. LCD HDTV

1 Answer

I want to mount my 31/32 in. t.v. on the wall. Where can I find a compatible wall mount?


You can go to Amazon.com or to your local electronic store and look for universal mount for your 32", it comes with all screws need it to install it.

Dec 30, 2009 | iLO 3200 32 in. LCD Television

1 Answer

I have a 37


Metric M5 screws, the wall you buy will be supplying with mounting hardware.
http://www.toptvmounts.com/

http://www.mountsdirect.com/

http://www.mountsmadesimple.com/

Just Google " wall mount for xxxxx"

Nov 24, 2009 | Televison & Video

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Jaime Hernandez

Level 3 Expert

2335 Answers

Jason Morris

Level 3 Expert

362 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...