Question about Cross Infoguard Shredder SX102M

1 Answer

Broken Caster I have a broken caster and am having trouble finding a replacement. Anyone know where I can find one?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

OK Master Draco,

Here is the scoop! The casters on your shredder are 30mm dual, swivel, threaded 1/4 x 20 x 1/4. These give you a rise of 1.5 inches above floor. Trying to match this spec is very possible but a little expensive (of course if the mfg made parts available it would be actually cheap. But they don't soooo).

My research found 71 manufacturers of the product that you need. The cost of getting production samples (which are free) to the USA is a minimum of $25.00! Out of sight for this project.

So, Hamar, what do you suggest??

I suggest that you go to PetSmart and purchase item #2755096 for $6.99 and replace all four casters. This will raise your shredder off the floor a bit more but since your raising all the corners it won't rock you to sleep trying to keep it level.

That's the best I could do...anyone else have a better solution?


Posted on Apr 01, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Parts for fellows sb-97cs

Check eBay for parts or Craigslist for a shredder you can cannibalize. Sometimes Fellowes can give you the part number which can help you search.

Jul 03, 2014 | Fellowes Manufacturing Powershred SB-97CS...

1 Answer

Ativa shredder

Most likely it will be a broken gear, you will need to disassemble the unit to replace the gear if you have the replacement ready. Try searching web for ativa spares and order gear for you model, otherwise you might need to disassemble the unit to remove old/broken gear and use it as sample when purchasing the replacement. If you know what you are doing the replacing gear task start to finish should not take more than 20minutes however it might take considerably longer depending on your technical knowledge and skills. Good luck

Oct 05, 2013 | Office Equipment & Supplies

1 Answer

ITSH 555 plastic gear stripped. Can anyone offer a source for these gears? I can't see throwing away a $50.00 shredder for a $.50 cent gear,

I have to believe that you could find a place online for this gear. My other thought is looking for a replacement out of an old printer, typwriter or something along those lines. The shredder is not that complicated and if you get a little inventive you probable have something broken at home that would work for that.

Jan 09, 2013 | Banner American Products Office Equipment...

1 Answer

Where can I find replacement wheel/casters for the Aurora AS1502X shredder?

Call 1-800-327-8508 USA Aurora Corp Customer Service
International only 1-310-793-5650

Feb 13, 2011 | Aurora Electronics Office Equipment &...

1 Answer

Center cutting blades are all bent up and broken/

Probably have to go to the manufacturer. It may NOT be economical to repair the unit.

Sep 15, 2009 | Office Equipment & Supplies

1 Answer

The white gears on my royal vf1000mx is broken. I need to order new gears or new shredder to attach to my basket. need info about who to contact or how to fix this problem. Thank you very much. Lee

call a repair company and find out labor cost. (You probably would not get it back together and timed) nor will anyone sell the gear at reasonable price. compare cost of replacement. you should also consider how much use you have had out of the cutter head. They so wear out, the more staples,paper clips and glue the faster they wear out

May 07, 2009 | Royal Office Equipment & Supplies

1 Answer

This cross cut shredder stopped cross cutting. Does anyone know how to fix it.

Broken gear, or C-clip came out & gear slip off shaft, you won't know in teal you take out cover and look.

good luck and plug before working on!

Mar 14, 2009 | Royal 85MX Shredder

1 Answer

Broken teeth on drive gear wheels Taros paper shredder Taros 31.8

New gears are $88.50 plus freight. You won't find any used gears because these usually break first. I can help.

Jan 19, 2009 | Intimus 385 se Shredder

1 Answer

Broken gear

I turned the gear arround and put it on backwards
I still need a new gear since it is still missing a couple of teeth

Jul 15, 2008 | Cross Infoguard Shredder SX102M

1 Answer

Broken Dahl shredder

Go to and try using the shredder selector to find the best shredder for you. Great products and Unbelieveable customer service. I should know I am one of their CS Reps.

Feb 20, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Cross Infoguard Shredder SX102M Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cross Office Equipment & Supplies Experts

Jeremy Mordkoff
Jeremy Mordkoff

Level 1 Expert

4 Answers


Level 3 Expert

7993 Answers


Level 3 Expert

6766 Answers

Are you a Cross Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides