Question about Barebone Systems

1 Answer

Installed new ink cartridges....printer won't print...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

Fixing cartridge problems can sometimes be easy and sometimes impossible.... first perform a reset of the printer... while the printer is powered on remove the cartidges ... remove the power cord from the printer tehn physically move the print carraige .... close the cover and power up the printer ... wait for the printer to request that you install the ink cartridges and install them. If this dosnt work repeat the same proceedure but this time clean the contacts on both the cartridges and the carriage. use a rolled paper towel (like a pencil) and bend it in half. Use distilled or bottled water and be very gentel... also avoid touching the ink heads on the bottom of the cartridges

Posted on Mar 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have just inserted a new HP ink cartridge 94 into my HP PSC 2350, as the ink was running low. I was printing photos, which keept printing with a red line throughout the picture. After inserting the...


Try opening the printer properties and cleaning the print heads (should probably be done each time a cartridge is changed), it uses some ink up but should clean the build up from running the previous cartridge dry and hopefully solve your printing problem.

Good luck.

Mar 29, 2008 | Barebone Systems

1 Answer

No text


Check that your black ink cartridge has ink inside, eventually try a new cartridge , as ink may have dried up in old cartridge.
If you use a new cartridge ensure you removed cellotape from cartrige.
If cartridge is ok, then it is printer nozzle/head for black ink.
In this case do nozzle check / head cleaning in printer tools a couple of times.
If problem persist you may need to check and clean printer's head with cotton and solvent.

regards

Mar 20, 2008 | Barebone Systems

1 Answer

INSTALLED NEW CARTRIGES AND PRINTER WILL NO RESUME PRINTING


hi maggievalley,

I need you to make absolutely sure that you followed the installation procedure of the cartridges correctly. Some manufacturers put a kind of tape on the cartridge when it ships from their factories to prevent ink from leaking out of the cartridge during transportation. This tape must be removed prior to installing the cartridge in a printer to allow the ink to flow out of the cartridge.
I suggest you remove the cartridges from your printer and reinstall them following the new cartridge installation guidelines of your printer's manufacturer step-by-step.

Hope you find this information helpful in solving the printing problem and thanks for using the FixYa service
Kind regards

Mar 08, 2008 | Barebone Systems

1 Answer

Brand new PIXMA MP520 just connected up. Having just installed the print head and the ink cartridges, now getting message when turn on the printer. >>> 6A80 Printer error has occurred. Turn...


Hi there,

I opened the printer, and pushed gently on the lever that holds/releases the print head, and this seemed to release whatever was stuck. After this the print head moved freely on turning on the printer/copier.

Mar 05, 2008 | Barebone Systems

1 Answer

Printer problems-------


Have you tried replacing the black ink cartridge with a new one. The new one you installed could have a defect.

Feb 28, 2008 | Barebone Systems

2 Answers

Printer ink consumption


Even if you are not using it for printing, the ink inside the cartidge will be dry, some solutions composed in the ink can be easily be dry if it is exposed in excessive heat or cold..

Feb 27, 2008 | Barebone Systems

1 Answer

Can't print in colour


Hi Paddy,
It sounds like the color ink cartridge is clogged. You can try taking the color cartridge out, and take a paper towel and some windex with amonia. Spray the paper towel with the windex and then take the color cartridge, and wipe the bottom of the ink cartridge. After wiping the bottom of the cartridge, try pressing on the bottom of the cartridge (Print head) with the paper towel...You should start seeing some ink soaking into the paper towel. If you do not see any ink on the paper towel, then try wiping it again with the windex/paper towel. If after a couple tries, you can not get the ink to flow from the print head, then I would suggest getting a new cartridge.
The HP ink cartridges can get a bit tricky and the print heads will clog when the printer is left sitting for a long period of time.
Hope this helps.
Good luck.
If you have any other questions, feel free to post them.
IF I have helped answer your question, please remember to leave a feedback and or rating for my suggestion.
Mac =)

Feb 13, 2008 | Barebone Systems

1 Answer

We just attached the macbook to the hppsc 1350v all in one printer and new print cartridges. When attempting to print, message reads"color print cartridge not compatible with this printer". We know we have...


Hi,

Just to confirm pls:
1. the new print cartridges are original HP inks;
2. you have remove the bright pink tape from the ink cartridges;
3. the black is on the right side and the color is on the left side.

You can try removing both cartridges and clean the gold colored contacts where the pink tape was. Pls do the same to the mate pins in the cartridge holder in the printer.

Try again. If this does not be corrective, you may need to change inks again.

Hope this be of help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Feb 02, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...