Question about Samsung CLP-600N Laser Printer

1 Answer

Help if you can. I have Samsung CLP-600N it's saying that a color cartidge is empty (I don't think it is) but even if Cyan is empty, I don't care. I'm only trying to print a document in black which is fine. But the printer obviously cannot figure that out and doesn't print at all. How can I get it to print even if it's only the things is black? ...thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Samsung Expert
  • 113 Answers

Hi,

1st of all the printer is a color printer, even if you print black only it will still pull a small percentage of color to run the printing.

if 1 of your color toner is empty. you will have to replace it before it allow you to print.

Posted on May 21, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung CLP 315 invalid toner message


the best thing to do is buy the original toner. how ever if u really can't then try changing the blue colored one

Jul 29, 2017 | Samsung CLP-315 Laser Printer

1 Answer

I just replaced the cyan cartridge and I get 4 blue lines that print where they should not be. If I print a blue picture - those line tend to be a lighter blue. I have taken the cartridge out and replaced...


Obviously you need to return the Cyan cartridge to where you got it. It is bad. Is it OEM Samsung or is it remanufactured. If it is remanufactured then it will usually say "for use in" or "remanufactured" somewhere on the box.
Either way it sounds like you need a replacement cartridge under warranty.

Sep 14, 2010 | Samsung CLP-600N Laser Printer

1 Answer

Printer will not power up.


If the Printer does not power up, and you tried another outlet and power cord, the problem lies with the power supply in the printer. Unit will need to be taken in for repair.

thanks adi

Dec 12, 2009 | Samsung CLP-600N Laser Printer

1 Answer

My printer's(Samsung CLP300 Color laser)smart panel says 'cyan empty replace the cartridge' even after refilling the cartridge.Not printing.


If you allowed your cartridge to run completely empty before refilling, the chip on the cartridge "knows" it is empty and will not allow it to be used. You can buy replacement chips for about $6.00 or so or buy third party cartridges for about $15. Your cartridge is not going to work until you get the chip replaced.

Jul 05, 2009 | Samsung CLP 300 Laser Printer

1 Answer

SAMSUNG CLP600 COLOUR QUALITY


I've had the same problem with color problems, especially with cyan (blue). I have found that many of the toner cartridges I receive are defective. When I receive a new one, I try it out for a few pages. If the color isn't perfect I return the cartridge and get a replacement. After 1-2 tries, I get one that puts down good color. (A really bad solution I know, but it does get the job done.)

Apr 01, 2009 | Samsung CLP-600N Laser Printer

3 Answers

Invalid transfer belt error on Samaung CLP 600N


This error can arise when the door on the right-hand side of the printer, the part you open in order to replace the toner cartridges, is not correctly closed. Close the top right-hand section first and then close the door on the right-hand side firmly (slamming it if necessary) and then check that all edges look correctly aligned. That should solve the problem. Incorrect shutting of these parts has always been the cause of this error on our Samsung CLP-600N laser printers and we have several of them.

Mar 23, 2009 | Samsung CLP-600N Laser Printer

Not finding what you are looking for?
Samsung CLP-600N Laser Printer Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

HEMANT GROVER

Level 2 Expert

167 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...