Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

3 Answers

KODAK EASYSHARE 5300

When I print pictures they have purple tint to them. Doesn't matter if printed from camera memory chip or computer, or scanned. All purple tint. Have recalibrated, changed cartridges and deep cleaned printer. All to no avail.

Posted by on

  • poseman May 08, 2008

    pictures have to much purple in them. while printing 4x6 photos all of the sudden they started comming out smeard. wont print clear anymore. they were printing nice at first.

  • joannstephen Jan 12, 2009

    I have done the same and all my pictures come out purple.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 45 Answers

Call Kodak for a new printhead.

Posted on Jan 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When I print pictures they have purple tint to them. Doesn't matter if printed from camera memory chip or computer, or scanned. All purple tint. Have recalibrated, changed cartridges and deep cleaned printer. All to no avail.

Posted on Oct 31, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Try to removed printhead and turn printer on and off, see if this works
-if not upgrade printer, repeat the printhead cleaning twice, and that should do it..
-contact manufacturer if not,
-goodluck..:)

Posted on Apr 11, 2008

4 Suggested Answers

Top_heavy
  • 15 Answers

SOURCE: Kodak 5300 all in one printer

new printhead needed. contact support

Posted on Jun 11, 2008

  • 96 Answers

SOURCE: Printer Kodak Easyshare 5300 Will not print black ink

Here are the things you will be asked to try if you call support. They may fix the problems as well. Taking the printhead out and putting it back in is the big helper.

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
(If this is a 5100, do it in the home center ->? in the top right ->Maintainence ->Clean Printhead.)
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Posted on Aug 19, 2008

reitann
  • 214 Answers

SOURCE: Picture only prints on one half of page

Try printing a testpage just press print + cancel and make sure you have a paper loaded

Posted on Dec 29, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KODAK 5300 PRINTER IS PRINTING PICTURES WITH A PURPLE TINT TO THEM


Kodak EasyShare 5000 series

Clean the print head then print a demo sheet.

  1. Verify that inkjet paper is loaded in the paper trays.
  2. On your desktop, start the KODAK All-in-One Home Center, then select the Help [?] icon.
  3. From the Help menu, select Maintenance, then select Print head Cleaning. The On/Off light flashes green during the cleaning procedure.
  4. When the On/Off light glows a steady green, press Photo and Copy simultaneously to print a demo sheet.

If the Demo print is bad- IE: no black, blurry print etc., then you may need to replace the print head:
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.

Thanks, Joe


Nov 10, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

6 Answers

I just purchased a Kodak printer to print my digital pictures. When I try to look at the pictures wheather the memory chip is in the camera or directly in the printer it will only read 46 of the 200 or -...


If that's the case try connecting the the camera to your computer then print all the pictures then format your memory chip to make sure this is not a problem with the memory chip...

Hope that helps.......

Aug 21, 2008 | Fuji Cameras

1 Answer

Kodak 5300 printer is printing picture with a purple tint to them


Is your monitor calibrated? What paper are you using? Are you using icc profiles? where are you printing from? ie: photoshop, windows application, other software? could be a conflict betwwen program and print driver.

Nov 10, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Why do my prints have a purple tint to them?


Most cauuses to this is dirty or failing print head.

Many people would say it was the sponge that is doing that but let me tell you if it was a full sponge you would not even see that color tint. Its the print head that is not mixing correctly due to being dirty or corrosive. Do you use refilled ink cartridges? If so you answer is iron clad your print head will need to be replaced and you need to put a stop to the refilled oslution, if not then the print head got dirty or is defective.

1. print head cleaner
2. new print head.

thanks hope this does help please do be considerate and rate and leave feedback for your free answer.

Apr 30, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Color of the picture printed out is not the same as the printed


Your printhead has failed. Call kodak for a new one. They are aware of the problem.

Feb 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak Easyshare 5300 Printer prints magenta tinted pictures


1 800-474-6836 this is a support number for HP products. They may be able to help you here or guide you to another source.

Feb 01, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

The pictures come out with a pink tint when printed


go into the menu and go to color moda nad you might have it set on something else

Dec 15, 2008 | Kodak EasyShare V1003 Digital Camera

1 Answer

Memory Card Requires Formatting


Hey B418,
Formatting will delete all your pictures on your camera or memory card. The camera might be prompting you to format because the the camera's memory is full. To avoid losing your pictures I would connect your camera to a computer, download your images to your computer first, and then format the memory.

Sincerely,
Allan
Go Ahead. Use Us.

Apr 27, 2008 | Kodak EasyShare C315 Digital Camera

1 Answer

Sony picture utility for DSC-W80 Need Help


Most picture software will work with any camera. I have a Cannon and use Kodak's software, which you can get from
www.kodak.com
go to support center---click on software--click on Easyshare software support--click on Easyshare software Downloads--click on Kodak Easyshare Software "Download" when the box comes up, "Run". It is great software. When you hook up your camera or SD card it will recognize it and you can load your pictures into it.
Try it, I love it.
I also have a Kodak all in one 5300. The Easyshare software is the same you can print with in the stores. So if you have a Kodak printer no need to go to the store and print your photos.

Mar 23, 2008 | Computers & Internet

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Cindy Wells

Level 3 Expert

4952 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...