Question about Xerox Phaser 7300DN Laser Printer

1 Answer

I have Xerox Phaser that had a paper jam in the fuser. I cleared the paper jam from the fuser and made sure there were no paper jams under imaging units. Closed lid and still says there's a paper jam, but there isn't. Shut off printer and let fuser cool overnight. Turned on printer and paper jam message still appears.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 87 Answers

The fuser exit sensor arm is a delicate piece of black plastic. It's possible you damaged it removing the paper jam. Remove the fuser and see if the sensor arm is still intact. It's in the middle of the machine.
There's more detail about the 7300 here:
http://michelsplace

Posted on Mar 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Xerox phaser 6180 keeps saying there is a jam at exit. Open door A. I have taken it apart & cleaned/cleared everything I can. Any suggestions?


This could be some paper still stuck in the fuser, so check that.

The usual cause of this, is the 'paper out' sensor arm (in the fuser) being broken.

I'm fairly sure that this is NOT available from Xerox as a spare part, so the quickest, easiest solution is to replace the fuser.

Jul 21, 2015 | Xerox Office Equipment & Supplies

1 Answer

I have a Xerox Phaser 6180 MFP, and it keeps saying paper jam and there is no jam, what can I do?


Check the fuser for paper stuck in it.


Check that the 'paper out' sensor arm (in the fuser) is not broken. If it IS broken, you'll need a new fuser.

Sep 03, 2010 | Xerox Phaser 6110 Laser Printer

1 Answer

FUSER GETTING OVER HEATED IN XEROX PHASER 7400.SOMETIMES A4 PAPER GETTING JAMMED IN FUSER ,WITH A3 PAPER THERE IS NO PAPER JAMMING PROBLEM.


Hello,
try to clean paper feeding rollers and chek fuser paper sensor, maybe paper comming too late...chek this just to be sure all its OK whit paper path and fuser.
...or replace fuser module!
Good luck!

Aug 23, 2010 | Xerox Phaser 7400DN Laser Printer

1 Answer

XEROX PHASER 6180 SAYS PAPER JAM, I CLEARED PAPER JAM, PUT IN NEW CARTRIDGE, AND IT STILL SAYS PAPER JAM


Check the fuser for paper stuck in it.


Check that the 'paper out' sensor arm (in the fuser) is not broken. If it IS broken, you'll need a new fuser.

Mar 16, 2010 | Xerox Phaser 6180N Laser Printer

1 Answer

Xerox Phaser 7700DN jam at fuser


Those rollers are necessary to feed paper from the fuser. Order PN 116-1759-00 which is the 15 inch long shaft w/ 4 rollers

Whit
Item, Inc.

Nov 10, 2009 | Xerox Phaser 7700DN Laser Printer

2 Answers

Phaser 7300 Jam at Fuser


need more info.

Are you printing more than one page documents? or are you printing a single page... because that would help to know.

The fuser is the most likely culprit. But it could also be a sensor somewhere. The printer has "timing" and when that "timing" is off even a milli-second, it will say JAM. Does it only jam on one type of media, or from only one tray?

need more info.

Sep 16, 2009 | Xerox Phaser 7300DN Laser Printer

2 Answers

Xerox phaser 6120 laser printer paper jam fuser


You can remove the imaging unit, then
Depending on the stock being used for the job, raise or lower the left and right colored Fuser separator levers. The levers will stay in the raised or lowered position on their own.
the levers are green. The fuser itself is not easy to remove.
Do you have any warranty left on the machine? Or a depot repair agreement?

May 19, 2008 | Xerox Phaser 6250DP Laser Printer

1 Answer

Xerox Phaser 7750DN FUSER JAM


Are you getting a specific code? 10-XXX ?? That would help narrow it down.

May 06, 2008 | Xerox Phaser 7750DN Laser Printer

1 Answer

Phaser 7300N paper jam


What code is comming up with the jam? That would help me narrow it down for you.

Apr 05, 2008 | Xerox Phaser 7300DN Laser Printer

Not finding what you are looking for?
Xerox Phaser 7300DN Laser Printer Logo

1,472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...