Help! Acer FM56-RS Modem & Alphanumeric Pager...
By Ross - usenet poster
I am having a problem using my new acer FM56-RS flex modem with
alphanumeric paging software. The FM56-RS uses the Rockwell RCVDL56ACF
/SP chipset. I used an IBM Mwave modem without problems before. Now it
seems like the new modem can't negotiate a connection.
I have tried all sorts of different init strings without success.
All the details of my problem are here:
http://www.total.net/~sum/page rmodem/index.html
Any help would be greatly appreciated.
Thanks
Stuart
remove -at- from email address
alphanumeric paging software. The FM56-RS uses the Rockwell RCVDL56ACF
/SP chipset. I used an IBM Mwave modem without problems before. Now it
seems like the new modem can't negotiate a connection.
I have tried all sorts of different init strings without success.
All the details of my problem are here:
http://www.total.net/~sum/page rmodem/index.html
Any help would be greatly appreciated.
Thanks
Stuart
remove -at- from email address
Best Solution
posted on Aug 10, 2005
Mini Me - usenet poster
Rank:
Apprentice
Rating: 0%, 0 votes
ApprenticeRating: 0%, 0 votes
I would try lowering the baud rate. Sometimes a 56 type modem with paging
software will not work correctly. Try 2400, it is fast enough for that
type of information, and can connect with more modems out there.
software will not work correctly. Try 2400, it is fast enough for that
type of information, and can connect with more modems out there.
Solution #2
posted on Aug 10, 2005
Putty - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
ApprenticeRating: 0%, 0 votes
[Sorry, this time with my correct email address]
I am having a problem using my new acer FM56-RS flex modem with
alphanumeric paging software. The connection needs to be made at 1200
baud. The FM56-RS uses the Rockwell RCVDL56ACF /SP chip set. I used
an IBM Mwave modem without problems before. Now it seems like the new
modem can't negotiate a connection at 1200 baud.
I have tried all sorts of different init strings without success.
All the details of my problem are here:
http://www.total.net/~sum/page rmodem/index.html
[links to:
[sound of good connection with old modem,
[sound of bad non-connection with new modem,
[AT command summary of new modem,
[AT commands that don't work, and
[a Log file of a few attempts.
Any help would be greatly appreciated.
Thanks
Stuart
remove -at- from email address
I am having a problem using my new acer FM56-RS flex modem with
alphanumeric paging software. The connection needs to be made at 1200
baud. The FM56-RS uses the Rockwell RCVDL56ACF /SP chip set. I used
an IBM Mwave modem without problems before. Now it seems like the new
modem can't negotiate a connection at 1200 baud.
I have tried all sorts of different init strings without success.
All the details of my problem are here:
http://www.total.net/~sum/page rmodem/index.html
[links to:
[sound of good connection with old modem,
[sound of bad non-connection with new modem,
[AT command summary of new modem,
[AT commands that don't work, and
[a Log file of a few attempts.
Any help would be greatly appreciated.
Thanks
Stuart
remove -at- from email address
Solution #3
posted on Aug 10, 2005
Joey2 - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
ApprenticeRating: 0%, 0 votes
[Sorry, this time with my correct email address]
I am having a problem using my new acer FM56-RS flex modem with
alphanumeric paging software. The FM56-RS uses the Rockwell RCVDL56ACF
/SP chip set. I used an IBM Mwave modem without problems before. Now
it
seems like the new modem can't negotiate a connection.
I have tried all sorts of different init strings without success.
All the details of my problem are here:
http://www.total.net/~sum/page rmodem/index.html
[links to:
[sound of good connection with old modem,
[sound of bad non-connection with new modem,
[AT command summary of new modem,
[AT commands that don't work, and
[a Log file of a few attempts.
Any help would be greatly appreciated.
Thanks
Stuart
remove -at- from email address
I am having a problem using my new acer FM56-RS flex modem with
alphanumeric paging software. The FM56-RS uses the Rockwell RCVDL56ACF
/SP chip set. I used an IBM Mwave modem without problems before. Now
it
seems like the new modem can't negotiate a connection.
I have tried all sorts of different init strings without success.
All the details of my problem are here:
http://www.total.net/~sum/page rmodem/index.html
[links to:
[sound of good connection with old modem,
[sound of bad non-connection with new modem,
[AT command summary of new modem,
[AT commands that don't work, and
[a Log file of a few attempts.
Any help would be greatly appreciated.
Thanks
Stuart
remove -at- from email address
Can you Help with these Modems problems?
Modems
i get no sound from my speakers or modem. do i have to...
Modems
i recently purchased a newer computer (yet to arrive) but...
Guru
Repair Service
About | News
| Contact
| Find Products
| Find Cars
| Terms
| Privacy Policy
| FAQ
Tags | Blog | Repair Service Directory | Extended Warranty | Partners | Careers |
Tags | Blog | Repair Service Directory | Extended Warranty | Partners | Careers |