Question about Dyson DC14 Bagless Upright Cyclonic Vacuum
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Cant replace a belt to
Generic problem for all Vacuums
Can’t replace a belt to
Posted by hegarty01 on May 03, 2008
Can’t replace a belt to a dyson dc14 all surfaces.
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You need to remove the bottom plate of the vacuum and then lift up the pulley side of the brushroll and then take off the old belt and install the new belt the replace the brushroll. Then take a belt puller or a screwdriver with a bend on the end and pull the belt onto the motor pulley and then track the belt in a straight line. If you have a problem with the belt change then refer to your local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Dyson Inc. 600 W. Chicago Suite 275 Chicago, Illinois 60610
Customer Service 1-866-693-9766 firstname.lastname@example.org
Thanks, Don the Vac Man
Go Ahead. Use Us.
Posted on Jun 13, 2008
Hi- I have the same problem: suction fine, but the brushbar was not spinning. I went 1st to the Dyson site and went thru their troubleshooting guide and I'd done all those things, so I called Dyson (1-866-MY DYSON in the USA) and they walked me thru a very simple solution.
What worked was to "rest" the bare floor/carpet adjustment, and it's very easy! You do this by clicking the carpet to bare floor adjustment back and forth at least 5 times. Make sure when you end it's on carpet. Then tilt it back all the way from the upright position so it's flat on the floor and turn it onto it's left side. The carpet indicator should be below the word carpet. THAT WAS IT! As soon as I turned it on again, the brush bar is spinning great! I wish I could tell you right now how well it picks up, but unfortunately I took out the filter and rinsed it, so I have to wait until tomorrow to **** anything up. However, I'm sure it will work now that the brush bar is moving. Like I said, the suction was fine.
Just as an FYI--If you call, they will have you try other things to rule out other problems 1st. I had already done all the things suggested in their troubleshooting guide on their site and the only additional thing they asked me to try was to turn it on and tilt it back as though you are going to vacuum and make sure the suction from the top tube had stopped, as it normally does, and mine did.
Hope this helps!
Posted on Oct 28, 2008
Tips for a great answer:
Jun 12, 2016 | Dyson DC14 Animal Bagless Upright Cyclonic...
Nov 21, 2014 | Dyson DC14 All floors Bagless Upright...
Jul 07, 2014 | Dyson DC14 Animal Bagless Upright Cyclonic...
Feb 26, 2011 | Dyson DC14 Animal Bagless Upright Cyclonic...
Oct 25, 2010 | Dyson DC14 All floors Bagless Upright...
Jul 10, 2010 | Dyson DC14 Animal Bagless Upright Cyclonic...
Dec 01, 2009 | Dyson DC14 Animal Bagless Upright Cyclonic...
Sep 14, 2009 | Dyson DC14 Animal Bagless Upright Cyclonic...
Feb 11, 2014 | Dyson DC14 Bagless Upright Cyclonic Vacuum
103 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: