Question about HP Pavilion dv6000z Notebook

1 Answer

Hp pavilion dv6000 no sound replaced zif cables

Hp pavilion dv6000 (centrino dual 1.66) no sound, replaced zif cables (pwr button and led lights all work) replaced speakers, replaced headset jack (headset still sound only on one side or other depending on how far plug is inserted) reinstalled drivers (win 7) device mgr says device working properly, still no sound, Please help,
Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 13,433 Answers

Hello

Are you absolutely sure you have the exact correct sound drivers installed? Please post me the exact Dv6xxxxxx model from the bottom of the laptop and is the windows 64bit or normal?

Posted on May 13, 2010

  • 5 more comments 
  • garsgr May 13, 2010

    dv6135nr
    64 bit windows 7 (speakers stopped working when vista 32 bit was installed)
    not absolutely sure about the drivers, device mgr says Conexant high definition audio, driver date 5/1/2008 version 4.33.1.61


  • Ekse May 13, 2010

    sounds about right, this is the official HP Vista 64bit driver, note that Vista drivers work in windows 7 as long as the bit version matches.




    http://h10025.www1.hp.com/ewfrf/wc/softw...




    uninstall the audio device and its driver software if you get the option from device manager /right click uninstall or from control panel programs and features / uninstall programs and then install this one



  • garsgr May 13, 2010

    installed recommended drivers, did a restart, still no sound, head phones still work one side or other depending on how far plug is inserted into jack.

  • Ekse May 13, 2010

    okay so you have sound but its not going to the speakers - you replaced the headphone jack. but it seems that there is a problem with the headphone jack, when there are no headphones in, the sound is supposed to go VIA the headphone jack to the speakers, thats why if you plug in headphones the speakers stop working.so it seems the jack is not relaying the signal forward, the connection is not being made at the back of the plug, like its supposed to when there are no headphones attached.




    I had this issue with my HTC phone a while back, the headphone jack was broken, and the sound did not get to the speakers.




    I have a video of that somewhere.

  • garsgr May 13, 2010

    I guess I'll install another head phone jack and see what happens.
    Thanks


  • Ekse May 13, 2010

    you can use a multimeter or just connect different pins on the headphone jack while music is playing and see if you get sound. Basically in the video that I have, I simply connected the back two pins on the board (I had removed the whole headphone jack from the board) and I got sound from both speakers.




    Okay I got the video online, unfortunately I did not make the video for fixya, I made it for a completely different purpose and I spoke finish during the video(I'm from finland), but again basically the point is you can see or hear that when I connected the two back pins together to sound started to come out from the speaker, the rest of the video is irrelevant.




    http://www.youtube.com/watch?v=OuBKP5EPW...



  • Ekse May 13, 2010

    in the phone case on the video, I used the multimeter to locate the connections needed to be made to get sound, then I soldered a wire to connect them together permanently, the phone is now without a headphone jack but at least the sound works for music / video / and normal phone conversations.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP Pavilion Dv6000z will not turn on


Florida Bob,

Battery is part of the power/charging circuit. As you have found it needs to be in place; kaput or not.

Believe your problem to be Power MOSFET's.

This will explain why,

http://www.fixya.com/support/t15330613-hp_pavilion_dv8_not_starting_up


(The Mayohardware article)

Now you may know what is wrong, and where to get replacement parts, and how to replace.

This is the HP Support link to the free Service Manual,

Main Support page for the HP Pavilion dv6000z Notebook PC,

http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=3224052

Manuals download page,

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=3224052&

In the list you want the blue -

HP Pavilion dv6000 Notebook PC - Maintenance and Service Guide

USE an ESD wrist strap.
Use a multi-compartment container for the various screws you will remove.
Label each compartment for the area the screw/s come out of.
SOME screws look VERY similar to other screws.
Advise DO NOT mix them up.

http://www.ebay.com/itm/65W-CHARGER-AC-ADAPTER-FOR-HP-Pavilion-dv1000-dv2000-dv5000-dv6000-146594-001-/221082152535?pt=Laptop_Adapters_Chargers&hash=item337985ee57

18.5 Volts (DC)

For additional questions please post in a Comment.

Regards,
joecoolvette

Dec 09, 2012 | HP Pavilion dv6000z Notebook

1 Answer

How do I remove/replace the keyboard from a HP Pavillion dv7-2277cl


1. Remove 6 screws from the bottom of the case (as shown). These screws hold the accessory cover.

2. Remove one screw securing the CD/DVD drive. Slide the CD/DVD drive to the left to disconnect it from the motherboard. Remove the CD/DVD drive.

3. Remove all marked screws from the bottom of the notebook.
The yellow circled screws secure the keyboard cover, and the green one secures the HP Pavilion DV7 keyboard.

4. Turn the computer display-side up and open it as far as possible. Insert a guitar pick or small flat screwdriver between the keyboard cover and case and slowly move along the side.

5. Lift the keyboard cover. Be careful, it's still connected to the motherboard. Release the zero insertion force (ZIF) connector and disconnect the cable from the LED board. Remove the keyboard cover.

6. Remove the four screws that secure the HP Pavilion DV7 keyboard.

7. Lift the rear edge of the HP Pavilion DV7 keyboard until it rests at an angle. Slide the keyboard back to disengage the tabs on the front edge of the keyboard from the top cover and rest it on the display.

8. Release the ZIF connector to which the keyboard cable is attached and disconnect the keyboard cable. Remove the HP Pavilion DV7 keyboard.

You can refer to the complete article via the link below:
http://laptoppartstore.weebly.com/replace--remove-hp-pavilion-dv7-keyboard.html

Apr 08, 2012 | HP Pavilion dv7 Keyboard (483275-001)

1 Answer

Describe your HP Pavilion dv6000z 15.4" Notebook Laptop PC (AMD Turion 64 X2 Duo Core TL-50 1.60GHz, 1GB RAM, 100G... (d6000z) PC Notebook Problem SCREEN WONT TURN ON LED LIGHTS OF POWER BUTTON...


The dv6000 series was commonly affected by the video card heating up and reseating itself. This was usually a soldering issue. You have a few options, You can either replace the motherboard, or have the motherboard reflowed. Unfortunately the video card itself is not detachable or individually replaceable.

I personally would recommend the second option as purchasing another dv6000 board will likely end you up in the same situation a year or 2 later.

A repair / reflow services on ebay
Dv6000 Repair

This repair tech only does amd processor models, Not intel.

Hope this helps.

Aug 29, 2011 | HP Pavilion dv6000z Notebook

1 Answer

Not power on


Your Pavilion DV6000 laptop is the key to your productivity, which is why it is essential that it turns on when you need it. The DV6000 is lighter than comparable models from other brands, and has a large, sharp display. While it has plenty of processing power, the DV6000 can have normal boot problems as well as problems caused by faulty battery packs that were installed in some units. Attempt to troubleshoot the laptop and find out if the laptop is eligible for a new battery pack.

1.Hard reset your laptop if there is no life at all. Unplug all peripheral devices and remove the battery. Unplug the AC cable and press and hold the power button for at least 15 seconds to drain all power. Reconnect the AC cable and hit the power button.
2.Verify that the battery pack is on the recall list if the laptop powers up without it. Fill out the form on the battery pack recall website (http://bpr.hpordercenter.com/hbpr/). You will have to input the serial number of the battery pack as well as a location to ship the replacement battery if you are eligible.
3.Hold the AC cable where it plugs into the laptop and wiggle it while hitting the power button one time. LEDs that come on and off intermittently indicate a faulty power cable. Order a replacement power cable through HP or a third-party vendor.
4.Write down any visual or audio error codes such as LEDs blinking or unusual beeping. The error sequence will be helpful when talking to an HP support person.

I hope this may help your concern.

Jan 22, 2011 | HP Pavilion dv6000t Notebook

1 Answer

Pavilion dv6000 when power button is pressed,


Have you tried to boot the laptop with the power cable connected? Is the charging indicator on when you connect it to the adapter? If the charging indicator does not light up, check if your adapter output and try booting it with the power cable connected.

Jun 19, 2009 | HP Pavilion dv6000t Notebook

1 Answer

Sound


That's what you'll need to replace:http://cgi.ebay.com/HP-Pavilion-DV6000-Power-Button-switch-cable-431437-001_W0QQitemZ150330305199QQcmdZViewItemQQptZLaptops_Nov05?hash=item150330305199&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318

It's right under keyboard.

Mar 26, 2009 | HP Pavilion dv6000z Notebook

13 Answers

HP Laptop sound and power button trouble


You don´t have to replace it. Just cut about 1,5 - 2 cm off the end (that´s where mine was broken) and scrape the tracks free with a knife. Then but a small batch of tape behind the end so it will be held in the socket. That´s it, a 10 min fix.

Apr 17, 2008 | HP Pavilion dv6000z Notebook

4 Answers

No sound in speakers


Sometimes the speaker internally disables itself when another audio device is connected (i.e. headphones or external speakers) and need to be reenabled from Control Panel. Try this.

Mar 07, 2008 | HP Combo Case HP PAVILION Speakers, Mouse,...

Not finding what you are looking for?
HP Pavilion dv6000z Notebook Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...