Question about JVC TH-C30 System

1 Answer

Won't power up.

We used it today...then we got a new DVR for cable. We unhooked the powersource and then when we plugged it back in, it wouldn't power on. We tried unplugging for a while and then we tried another elec. jack. Still no power getting to it

Posted by on

  • jkorber Aug 15, 2008

    My TH-C30 worked in my RV in March but in April, 2300 miles later it did not work at all - no stand-by power light. I get 120 volts to the end of the input power cable but nothing happens.



    I plan to pull the back off hoping that the fuse i read about on this website, has broken from the RV trip. Otherwise, i am lost. I am sure it shook to death.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I have a TH-C30. I had the same problem where the unit just stopped working - no standby light and no recognition of power at all. After checking this forum and another, I opened the unit, found the ceramic fuse where the power comes in and went to Radio Shack. They have a T1AL250V fuse pack that is a 1 amp, 250 volt, 5 X 20 mm SLOW BLOW glass fuse which is a better fuse for this common problem. Their RS number is 270-1063 and a pack of 4 costs about $3. Put new fuse in and the problem was solved.

The repair took minutes - 3 screws on the back and two screws on each side. Lift the cover from the back (it is slip-hinged on the front) and replace the ceramic fuse. It slips out with a little help and the new one snaps in place.

Posted on Aug 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need DC car adapter for Duracell powersource mobile 100


the positive pin is the one to the right when looking at the power connector with the mobile 100 standing up correctly, the negative is the one at the far left. I made mine start charging this way: Still don't know what the middle pin is for. Just make your own cable out of an old car plug and possiblly a pc power source connector. it's not that difficult.

Apr 20, 2013 | Xantrex Technology Duracell Powersource...

1 Answer

Is there a reset button on a printer? I was printing and my machine just shut off and now won't power back up. I know there is power to the outlet.


Some may have but my Kodak and the Cannon that I replaced didn't usually you can unhook the printer cable and the plug in power cable for 5 min. then hook them back up and they will start. PS make sure the power cable has power.

Jul 19, 2011 | Office Equipment & Supplies

1 Answer

We have a new 60 inch LED Sharp TV. Will an APC #BN600R battery backup, 600 VA 360 watts, handle a power outage or surge for this TV and a Dish network DVR??


Hello,
Yes this UPS will protect the TV and the DVR.
The TV is pretty energy efficient, and uses just under 100watts powered on. The DVR uses under 30 watts, so under heavy load you won't go over 150 watts if just these two devices are plugged into the battery backup side of the UPS. I'm not sure how long this UPS battery last's in a power outage, but since you are not using it to the full 360 watts, you should get double time out of it, though of course, its best to power off your devices as soon as you can. Regards, Chris

Jul 12, 2011 | APC BN600R Battery Back-up 600VA UPS...

1 Answer

Car is parked, engine off, keys out and master warning light is on with warnings flashing on the display. there is a constant buzzing sound. we just bought this brand new today. what do i do to fix it...


For tonight I would just unhook that battery, and call them in the morning. I wouldn't do anything other then unhook the negative battery cable. You don't want to do anything to void the warranty.

Jun 12, 2011 | 2011 Toyota Sienna

2 Answers

Need to determine wiring connections from camera to dvr for Samsung SSC DVR


Hi


Thanks for using FixYa. Please see the link to hook up DVR with camera---

Hookup Camera with DVR

Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 16, 2010 | Samsung SSC DVR Digital Video Recorder...

1 Answer

No Sound


cable pin is lloosed then change the cable pin

Jan 22, 2009 | Pioneer DVR-225 DVD Recorder

2 Answers

Set HDD to master


The internal power supply to the HDD is often suspect in these units. Check you have power on the internal plug to the HDD from the circuit board. if you do not Try fitting an external HDD power supply (£15) this cured my unit which had a similar fault.
Hope this helps - good luck.

Jul 23, 2008 | Swann Communications DVR4-Alert Video...

Not finding what you are looking for?
JVC TH-C30 System Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4940 Answers

The Knight
The Knight

Level 3 Expert

73073 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...