Question about Remote Controls

1 Answer

Cant find codes to my remote

Hi can't find the code manual after moving grrrrrrhhhhhh! can you help the only name i can find on this remote is total control please help

Posted by on

  • Anonymous Apr 27, 2008

    battery died need codes for rca 460-4 remote

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Posted on May 05, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hello,





    This thread has gone 14 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant setup remote control for my tv please help


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window " to get gathered related posts.....

Apr 26, 2016 | Remote Controls

1 Answer

Hi I have a crest crp5 remote and cant find the code fo a teach, help?


If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Feb 07, 2015 | Remote Controls

1 Answer

Cant't find the manual for the Total Control Remote bought from argos. Found instructions for the 4 in 1 of the same brand, but they are not relevant for this model, as there is no TV button. Can anyone...


Find your device code in the code section.
Codes are listed by brand name. The most popular
code is listed f irst. Make sure your television is switched on
(not on standby).
2 Press and release the TV key on your TOTAL CONTROL.
3 Press and hold down the SET key until the red light blinks
twice (the red light will blink once and then twice).
4 Enter your four-digit code using the number keys.
The red light will blink twice.
5 Now, aim your TOTAL CONTROL at your television and
press POWER. If your television switches off, your TOTAL
CONTROL should be ready to control your television.
Check these codes. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given.
http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

Oct 11, 2013 | Remote Controls

3 Answers

Manual for URC-11-2840R00


how do you set up a Total control 4 way remote silver

Mar 19, 2010 | Universal Remote Control GE174Universal...

1 Answer

Urc code lost


matsui freeview has any one got the code for this total control URC11 2840r00

May 21, 2009 | Remote Controls

1 Answer

Code for total control4 - Proline TV


i have the same problem cant get a code for my durabrand dvd recorder

May 05, 2009 | Remote Controls

1 Answer

Lost manual


hi my name is mark, since you left no model # try this link http://www.managemyhome.com/mmh/products/ManualSearchDisplay.action hpe this helps. thanks for your question.

Mar 18, 2009 | Remote Controls

1 Answer

Hi I carn't set up my total contol remote for my tv can you help


Hi fishbones675,

Not a problem - here's how to do it:

1) Turn on your TV.
2) On your Total Control Remote, press and release the TV button.
3) Press and *hold* the SET button (the red light will blink once - keep holding it - it will then blink twice - release the button).
4) Enter the four digit code for your TV (the red light will hen blink twice).
5) Press POWER - the TV should turn off. This will mean that the remote has successfully been programmed.

If you don't know the code for your TV, refer to the list of codes in the user manual, available at the following web address:

http://www.remotecodelist.com/remotes/URC_4140_B00_and_B01.pdf

If your TV brand is not on the list, or if the codes for your brand don't work (which I've only seen happen once), then try the CODE SEARCH feature:

1) Press TV.
2) Press and hold SET (as above)
3) Press 9-9-1.
4) Alternate between pressing the TV and POWER buttons. When your TV turns off, that means the remote has found a code that will operate your TV.

I hope this helps - please let me know if I can be of any further assistance.

Dec 11, 2008 | Remote Controls

1 Answer

Remote control codes


http://www.remotecodelist.com/remotes/

Dec 10, 2008 | Remote Controls

4 Answers

Small universal remote control 'TOTAL control' brand


I downloaded the complete user manual for free at Forum: www.remotecentral.com

Mar 14, 2008 | Remote Controls

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68153 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...