Question about Toshiba e-Studio65 Copier

1 Answer

Sharp SF-2540 copier error code FI-06

Can anyone tell me what this code is and how to reset it or fix the problem,any assistance would be helpful also I would like to find a service manual for this copier.Thanks Dana

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

The F1-06 error is = Paper exit drive overloaded in sorter. This means that the exit unit is not driving/ turning properly/ fast enough. This could be that the motor is going bad, exit sensor is bad, drive belt is bad, paper or forgn. ( staple, paperclip, .ect...) in stuck in that area. If you do not have the proper wall voltage, could cause this problem.

Check wall voltage, check exit area for torn paper, paper clip, etc..., check exit sensor and actuator, check belt for wear or broken, check motor ( is it turning/ running) and then controller brd.

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sharp SF-2540 it has a code H5-02


its an error code for the fusing unit

Sep 06, 2016 | Sharp SF 2540 Copier

1 Answer

How do i remove error code C2 on Sharpf SF2540


Check the Transfer corona wire assy. located under the drum where the paper flows by, mite be broken or the power supply that provide power to it mite be bad, several hundred to thousand of volts during a copy operation when machine is woking

Sep 22, 2014 | Sharp SF 2540 Copier

1 Answer

Sharp 2540 code f2


F2 mean toner not supply .Change toner chip

Jul 12, 2014 | Sharp SF 2540 Copier

1 Answer

After powering on, it will show F2 on the Sharp SF 2540 Copier, So please, I need a programme code to clear it or any other solutions to solve it problem


You need to take it to a Sharp technician to check machine , usually a toner issue that toner is unable to replenish in developer unit and so blows the chip on toner cartridge ,

replacing toner cartridge rarely helps
seeing as it is a deeper issue

Sep 12, 2013 | Sharp SF 2540 Copier

1 Answer

How can I reset the password/ Copying code on SF 2540 copier


codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Aug 08, 2012 | Sharp SF 2540 Copier

1 Answer

Call for service


What is the error code that is being displayed???

Sep 09, 2011 | Sharp SF 2540 Copier

1 Answer

I have sharp AR-163 it indicate f5 error. And Sf 2030 error code f2


Ar163 F5 = Copy lamp problem.

Possible causes are:

Blown Copy Lamp
Inverter trouble (copy lamp driver module)
MCU Board failure

This is most likely to be a blown copy lamp.

Ar2030 F2 is a process control error - depending on the sub-code it could be a number of different things. Please repost with the full code.

Hope this helps.

Feb 09, 2011 | Sharp SF 2540 Copier

1 Answer

Sharp SF-2540 FI-06 error code


looks like a shift error. This is the part that offsets the pages at the exit. See below.
1a21292.jpg

Mar 29, 2008 | Printers & Copiers

3 Answers

Sharp sf.2540


Press C - interrupt - 0 - interrupt - flash
and then
14 and press start
Good luck!

Feb 26, 2008 | Toshiba e-Studio65 Copier

Not finding what you are looking for?
Toshiba e-Studio65 Copier Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...