Question about ASUS VW192S Monitor

1 Answer

Suddenly went blank while in use no power lighttotally dead

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://www.badcaps.net
http://en.wikipedia.org/wiki/Capacitor_plague

Posted on May 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

30" apple cinema display suddenly went blank.


It's probably the backlight. If you look very closely, perhaps using a flashlight, you might be able to see that it is still working but just not being lit up from the back. In that case it may be worth fixing, but if not, then it's probably past its useful life.
One other thing you might try is a different power supply.

Feb 14, 2014 | Apple Cinema HD 30" LCD Monitor

1 Answer

Nissan 1995 Sentra power windows and panel lights are dead. both power windows and panel lights suddenly went dead leaving the windows in up positionor also the radio does not work. I've change


I just answered your other question about this same issue. You need to stop replacing parts long enough to DIAGNOSE the problem so you are not creating further problems by changing all the parts on the car.

May 16, 2012 | 1995 Nissan Sentra

1 Answer

Nikon d40x suddenly stopped working- won't turn on- was working fine and when I connected it to laptop to download, it turned on , then suddenly went blank.


Do you get the 'push shutter button again' or 'turn off and on again ' message? If so the motor in the SQ unit that charges the shutter and moves the mirror up and down has failed. A very very common problem. The part is on constant back order at Nikon, and good luck getting it anyway as Nikon is going to stop selling parts to anyone in just a few weeks.

May 06, 2012 | Nikon D40x Digital Camera

1 Answer

Starter went dead suddenly. starter it self or


check wires at starter ensure they re clean n tight

Apr 25, 2010 | 1995 Cadillac Eldorado

1 Answer

My awa LCD tv suddenly went blank but had sound then went completely off and has no Power at all is it worth having serviced or would it cost too much.cheers


Get it service.U have two problems.The LCD inverter board and the power supply board are dead.The shop should cost u half of a new tv.

Feb 25, 2010 | LG 42LC2D 42 in. LCD HDTV

1 Answer

No power - suddenly went dead, no green or orange power light.There is mains power at the monitor's power input socket.


Check all caps in power supply. Look for the tops of the caps to bulge. Replace any that looks or smell bad, like a sulfur smell. Make sure you put them in the right way. I usually increase a cap that blows. If its a 16v I go to a 25v or a 25v to 35v. keeping the same ufd. Because of the surge, off and on, It helps.

Oct 26, 2009 | ViewSonic VX924 19" LCD Monitor

1 Answer

My zen suddenly went blank!


Your device lockup isn't uncommon, and in most cases is easy to fix. You need a small paperclip or straight pin to reset the device. When you reset, be sure to hold it in and wait for the blue light to turn off. Once you power the unit back on, it will rebuild and should operate as normal.

Dec 25, 2008 | Creative Labs Zen Digital Media Player

1 Answer

Laptop just went blank...cannot power up or turn on


try by resiting the ram, if the problem persits than your display adapter is having problem

May 19, 2008 | HP Compaq Presario V2000 Notebook

Not finding what you are looking for?
ASUS VW192S Monitor Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...