Question about Grilling

1 Answer

I changed the gas tank and when I'm trying to light it up - nothing happens. It looks like gas is not getting to the burners

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,461 Answers

Blocked gas orffice of burner blocked clean both see if this helps

Posted on May 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Junkers manual gas hot water


What are you expecting to happen?

I assume the water heater and water inside it is cold (otherwise you would not be lighting it). You light the pilot. The main burner comes on and the pilot lights it. The main burner should stay on until the tank is hot, When the tank gets hot the main burner should shut off but the pilot stay on. If you draw hot water, cold water will run in and cool the tank. If yu do nothing the tank will eventually just cools off. then the main burner should come back on to reheat the tank.

Nov 05, 2013 | Water Heaters

1 Answer

I have a 3 burner CaptnCook gas grill. The middle burner has a single flame when I try to light but does not light the whole burner row, just right at the front only. The right and left will not light at...


The problem lies with the grill's regulator and how the gas tank valve was opened.

To solve this problem, first be sure you have adequate gas in the tank. If that checks out OK, do the following:

1. Turn the gas tank valve OFF and disconnect the hose from the tank.

2. Wait 5 minutes and reconnect the hose to the tank.

3. Open the tank valve VERY, VERY SLOWLY (Slow motion, slow).

4. Once the tank valve is fully open, light the burner farthest from the tank first and set the burner
control knob on HIGH. Does the flame height look correct for being set on HIGH? If so, light
the remaining burners the same way. Do all the burner flames look correct? If so, you solved
the problem. Remember, to always open the tank valve Very, Very Slowly.

If that didn't solve the problem, you will need to replace the grill's Hose/Regulator Assembly. It runs about $30.00 at any home center or hardware store that sells grills & accessories. If you replace it, turn the tank valve ON Very, Very Slowly.

Hope this helped you to troubleshoot and solve the problem. Happy Grilling!!
Thanks for choosing FixYa.

Aug 23, 2011 | Barbeques Galore Capt'n Cook 3-Burner...

1 Answer

I have a Brinkman pro series 6330. I just went and had my tank filled and when I hooked it up and turned the burner on to light it, there was no gas getting to the burners. I tried some of the tricks I...


It's a regulator problem, but one that is usually resolvable by doing the following.

1. Turn the gas tank valve OFF and disconnect the hose from the tank.

2. Wait 5 minutes and reconnect the hose to the tank.

3. Open the tank valve VERY, VERY SLOWLY (Slow motion, slow).

4. Once the tank valve is fully open, light the burner farthest from the tank first and set the burner
control knob on HIGH. Does the flame height look correct for being set on HIGH? If so, light
the remaining burners the same way. Do all the burner flames look correct? If so, you solved
the problem. Remember, to always open the tank valve Very, Very Slowly.

If that didn't solve the problem, you will need to replace the grill's Hose/Regulator Assembly. It runs about $30.00 at any home center or hardware store that sells grills & accessories. If you replace it, turn the tank valve ON Very, Very Slowly after it is installed or you will be back to square one, again.

Hope this helped you to troubleshoot and solve the problem. Happy Grilling!! Thanks for choosing FixYa.

Aug 03, 2011 | Brinkmann ProSeries 810-6330-W Grill

1 Answer

We just used the grill the other night went out to cook tonight will not ignite ....I can hear the gas so that is not it ...any suggestions? I am newby at all this but have been doing fine .....


Are you saying the ignitor won't light the burner(s), but you can hear gas going thru the burners?
If that's the case, try match lighting the burners. That's a good way to find out if you are really getting enough gas for combustion.

If after match lighting it, you find that burner flames remain low, even when they're turned to High. Here's what you need to do:

1. Turn the gas tank valve OFF.
2. Disconnect the hose from the tank and wait 5 minutes.
3. Reconnect the hose to the tank and open the tank valve VERY, VERY SLOWLY (Slow Motion,
slow).
4. Once the tank valve is fully open, try lighting the burner farthest away from the tank first and turn
it to High. Did the burner light and the flame height looks normal? If so, light the remaining
burner(s) the same way. Do all the flame heights look normal? If so, you solved the problem.

Remember to always turn the tank valve ON Very, Very Slowly.

Hope this helped you to troubleshoot and solve the problem. Pleas let me know and Happy Grilling, Newby!!

Jun 15, 2011 | Char-Broil 7000 Quick Set Gas Grill

1 Answer

When pressing igniter switch - hear a pop like gas is going to light but no flame appears. Used the central knob as stated. Also tried manual method using end knob. Nothing happened. Brinkman model...


If you're using a 20 Lb Propane grill tank, here's what you need to do.

1. Turn the tank valve OFF.

2. Disconnect the hose from the tank and wait 5 minutes.

3. Reconnect the hose to the tank and open the tank valve VERY, VERY SLOWLY (Slow motion,
slow).

4. Once the valve is fully open, light the burner farthest from the tank first and turn it to HIGH.
Did the burner light and the flame looks normal? If so, light the remaining burners the same way.
Did all the burners light and all the flame heights look normal? If so, you solve the problem.

Always remember to turn the tank valve on very, very slowly. If that did not solve the problem, remove and clean all the burners and each burner's venturi valve. Spiders love to build nest in them.
iIf cleaning the burners and venturi valvesdidn't solve the problem, you will need to replace the Grill's Hose/Regulator Assembly. You can get one at any home center or hardware store that sells gas grills and accessories for about $30.00. Take your old one with you for comparison purposes.

Hope all this helped you to troubleshoot and solve the problem. Please let me know. Happy Grilling!!

Jun 13, 2011 | Brinkmann Grilling

1 Answer

Brinkman gas grill won't start. Don't hear clicking sound. Hooked up new gas tank, but no success


Victor, are you sure you're getting gas to the burners after installing the new tank? You can try match lighting them to make sure. But, I suspect, that it's the installation of the new tank, that's causing the problem.

To test my theory, tune the tank valve OFF and disconnect the hose from the tank. Wait 5 minutes and reconnect the hose to the tank. Ope the tank valve VERY, VERY SLOWLY (Slow motion, slow). Once the valve is fully open, try lighting the burner that's farthest from the tank first and turn it to high. Did the burner light and does the flame height look correct? If so, light the remaining 3 main burners the same way. Did those burners light and the flame heights looks correct? If, so you solved the problem. Remember to always turn the tank valve ON VERY, VERY SLOWLY.

Hope this helped you solve the problem. Happy Grilling.

Jun 01, 2011 | Brinkmann 810-8410-S Stainless Steel...

1 Answer

Two things....I changed the tanks out last night and I can't get the burners to light. Full tank of gas as I checked it. Took the burner covers off and cleaned the burner pipes itself and still nothing? ...


Replace the regulator to get your burners to work you can get that at Home Depot, call Weber to get the other part, if your grill is under warranty you may get it Free!

Aug 15, 2010 | Weber Genesis E-310 Gas Grill

1 Answer

No Gas Getting to Back Burners


sounds like you have debris in the gas regulator,remove the tank and look into hose end to see lf its clear.sometimes just tapping lightly on the reg,will release the debris.u may need to replace hose and regulator to burner assymbly.if this doesnt fix it.

Apr 13, 2010 | Weber Genesis Silver C Grill

1 Answer

Our grill doesnt seem to be getting enough gas to stay lit. when you turn the burners on your hear the gas coming through for 2 seconds..then nothing, and it wont stay lit


How are you turning the grill on and off? It sounds like a vapor-lock. Try this: first unhook the regulator and crack the valve on the tank open...if you hear and smell gas coming out, good, close the valve and re-connect the regulator then open the gas valve then turn the burner on and light it...then shut it off by closing the tank valve first and let the burners go out then turn off your burner valves...try that and let me know what happens.

Sep 06, 2009 | Grilling

Not finding what you are looking for?
Grilling Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Grilling Experts

paulcarew

Level 3 Expert

2461 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...