Question about Korg TR76 76 Key Synthesizer Workstation

1 Answer

Losing track settings when saving SNG. files on Korg Triton

When I load a standard midi file and modify settings and add effects or change instrument parameters etc... When I save work as a SNG. file and open it from disk I lose all my chances and it loads with none of my settings. Anybody have words of wisdom for me!
Thanks!
Twain1

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

Once you modify any settings or special effects you have added you must save that file within the program save options you are working in at the time when you made your modifications. Also , your file extension must be whatever is allowed within that program . You cannot change the extension to save it somewhere else or all of your changes will be lost.

Posted on May 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My synth wont load when I power it on. can anyone help?


I suggest a hard reboot / initialize. Istructions are in your manual or on the Korg website

Jun 09, 2015 | Korg Pa800 Synthesizer

1 Answer

How to save x5d sounds in laptop


Hi,
if you do not already use a midi sequencing software try "Bome's SendFX". After installing, go to X5D menu 04A MIDI DUMP, choose data you want do dump (e.g. "all"). Make sure, that no SYSEX FIlter is active while working with a sequencing software.
After transmission, you can save the "yoursounds.mid" file and send it back to the X5D later.
Good luck!

Apr 19, 2014 | Korg X5d

1 Answer

While using korg m50 editor using usb data cable there is no sound from my lap.the sound is only from my head phone connected to my keyboard directly?


Are you connecting to the laptop and using it as a midi controller? You can record midi notes from the keyboard and send them to your laptop via USB using any midi sequencer program (reason, logic, etc). Create a midi track, select the input of that track as your keyboard, then hit record to play some midi notes. To hear what you record, you have to set the output of the midi track to whatever midi sounds or instrunents you have installed on your laptop.

If you are trying to record the actual audio sound the keyboard makes, use an audio program such as cubase, sonar, audacity, pro-tools, and either mic the keyboard, or connect one of the other audio outputs (1/4" TRS) to an audio input on your DAW, and record an audio track that way (as opposed to a midi track).

Apr 13, 2012 | Korg M50 61-Key Music Workstation Keyboard...

1 Answer

How do I play the O1WFD sequencer through the Triton Pro X??


Here is a link to a site with all the info you need:http://forum.recordingreview.com/f18/midi-troubleshooting-101-a-5208/ You will need to join which is free and well worth the time. I also recommend downloading the free book Killer Home Recording Setting UP.

May 16, 2010 | Music

1 Answer

Loading an MPC5000 with midi files


if the mpc has GM soundbank then this should be possible. You might be better off recording the audio from a suitable GM unit first of all before gigging with it, then you can make it sound the way you want and change the key to suit etc.

Dec 18, 2009 | Akai Mpc2500 Music Production Center

1 Answer

I own a korg triton music workstation sampler and when I create a sequence using the 16 tracks and I want to make a song using a que list all of my inserted effects on all the instruments do not work when...


you need to ensure that you have recorded the midi command to select each effect and level of that effect. this can be done in the midifile. you need to start record and very quickly at the start of the song you need to select the effect and set the level, whilst in record. this should write the setting into the song. you can check this if you use an external sequencer.

Dec 13, 2009 | Music

1 Answer

Still dont get it


Hi Mark.

Siorry, but because of a fault with the system I am not able to reach you on the other thread.

Normalizing tracks means leveling volume settings for a group of tracks or samples to mix or combine them together without troubles like the ones you got.

to normalise tracks you can use the function built in on the Korg studio, see normalize in the software help.

When operating on MIDIs also remember that MIDIs are recorded on different channel (example drums, guitar bass guitar).eg:bTd Aerosmith MIDI archive
When you use them on a sequencer, and you operate on the volume, ensure

Mar 29, 2009 | Korg Legacy Collection

1 Answer

Triton Le


when you are setting your midi track on the mpc are you changing to 2A-Device02 for the 2nd track? 3A-Device02 would be the 3rd track and so on. Let me know if that helps. you should make a new track for each instrument you record from the triton to the mpc, helps when dumping.

Feb 18, 2009 | Korg Legacy Collection

1 Answer

Trouble with hooking mpc4k and korg triton pro to mbox


you will want your triton midi-in to go to your mpc midi-outB

then your mpc midi-inA to go to your mbox
your mpc midi-outA to go to your mbox

that should get you good for midi cables....


on the mpc, everytime you want to record a track using instruments from your mpc you will need to set a new track. on the main screen you would go to a new track (where Tr:01-Track-01 is) and change S:DRUM1 to S:MIDI, then to the right of that where it says OFF, turn that to 1A-Device01 ... you will have to make a new track for each instrument you use to help when bouncing tracks to mbox. for instance 1A-Device01 is the 1st track on your triton, 2A-Device02 is your second track and so on. make sure you also make a new track each time for where Tr:01-Track-01 is also for each instrument.

for the mbox i might be a little rusty on this so im going to post a quote from another site....

"in Pro Tools, go to setup - midi - midi studio. this is where you tell pro tools where your midi devices are connected. next, go to setup - midi - midi beat clock. you want to 'enable midi beat clock' and select the devices that are going to be receiving midi beat clock. all devices that you setup under midi studio should be showing. next, set pro tools' tempo for the session if you haven't already. This setup is based on Pro Tools being the MASTER device and the other device(s) SLAVE(S). Make sure that on your hardware/midi interface that the midi output is going to the midi input on the slave devices. On the mpc, press mode, then pad 9 and go to the sync tab. Choose "slave" under "sync in" and the port, 1 or 2, that your mpc will receive midi input. That's it!! When you start Pro Tools' sequencer, the mpc should start too at the same bar/beat location. I've tried slaving Pro Tools to the MPC1000 and Fantom Xa on diff. occasions but I could never get them in sync with Pro Tools. Tried diff. framerates and settings, but still, no luck. So I prefer using Pro Tools as the MASTER sending midi beat clock. Another thing, make sure that whatever you're tracking into Pro Tools doesn't change tempo during the song. If so, you'll have to edit tempo events in the tempo ruler. Hope this helps!!"

let me know if you need any more help.

Feb 16, 2009 | Akai MPC-4000 Plus Production Center (w/80...

1 Answer

Electronic drum kit, with USB out, problem


Sounds to me like you have the midi tracks outputting to the microsoft midi mapper or wavetable synth, which is built into the sound chip in your pc, and that this is conflicting with the mobilepre sound card - midi is just data, no audio, needs to drive some kind of synth. what you want to do is disable your internal sound card thru device manager, then just use the m-audio mobile pre as the input/output sound card in ASIO mode - you'll need to monitor via the headphone jack on the mobile pre or plug speakers into the line outs on the interface.

Then do tutorial 8 (in help files) on using soft synths - INSERT>SOFTSYNTHs creates a midi track and an audio track in a track folder.

Good luck.

The dude.

Aug 07, 2008 | Yamaha Dtxpress Iv Special Electronic Drum...

Not finding what you are looking for?
Korg TR76 76 Key Synthesizer Workstation  Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Korg Computers & Internet Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Sunny Solanki
Sunny Solanki

Level 2 Expert

261 Answers

Rabbit Brains
Rabbit Brains

Level 3 Expert

575 Answers

Are you a Korg Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...