Question about Meade TeleStar 60AZ-A Telescope

1 Answer

Just set it up and it picks up no objects - Meade TeleStar 60AZ-A Telescope

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,186 Answers

This is a small REFRACTOR style telescope of 60mm. Not much larger than a pair of 10x50mm binoculars.

Put the eyepiece with the largest number written on it into the telescope. DO NOT use the 2x or 3x barlow if you have one. Practice focusing on a distant object during the day time. The moon should be your first object at night.

Read my TIPS on my profile page and read this:

http://www.texasastro.org/telescope.php

Posted on May 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HP deskjet 3745 will not draw paper


>Check pick up roller trying to pick the paper?>Clean pick up roller.>Check any paper objects struck in side?

Dec 18, 2011 | HP Deskjet 3745 Inkjet Color Printer

1 Answer

I need a manuel for indiana jones the orginial adventure wii game


MEPLAY CONTROLS:
wii_ana.gifControl StickMovewii_a.gifA ButtonJumpwii_b.gifB ButtonAttack. Build (Hold).wii_1.gif1 ButtonFreeplay Character Togglewii_2.gif2 ButtonFreeplay Character Togglewii_plus.gif+ ButtonPause Menuwii_c.gifC ButtonFree Tagwii_z.gifZ ButtonUse Whip. Use Ability. Use Tool. Pick Up/Drop Object.

Attack
wii_remote_v_pitch_front.gifor_13x8.gifwii_remote_v_turn_left2righ.gifWhip ActionsDrag Object. Topple Object. Pull Object. Activate Object. Destroy Object.wii_remote_v_pitch_front.gifplus_8x8.gifwii_b.gifWhip ActionsDisarm Enemywii_remote_v_pitch_front.gifplus_8x8.gifwii_z.gifExcavate
wii_remote_v_pitch_back.gifPick Up and Throw Object
wii_z.gifcomma_7x8.gifwii_remote_v_pitch_front.gifplus_8x8.gifwii_z.gifFix Machine
wii_remote_v_turn_left2righ.gifplus_8x8.gifwii_z.gifBuild
wii_z.gifplus_8x8.gifwii_nunchuk_pitch_vert.gifplus_8x8.gifwii_remote_v_pitch_vert.gif

Jul 15, 2011 | LucasArts Entertainment Company Lego...

1 Answer

We just set up our telescope and can't see anything. We do have the cover off, have used all the eye pieces but it's dark. Kinda feel like a dope but obviously we're missing something. ...


Start by using it during the day pointing at a nearby object (100yds or so) Start by sighting along the axis of the scope. Use the lowest power (highest number in mm) eyepiece. (BTW the eyepiece is in the front of the scope where the light comes in and this will be the part of the scope that is closest to the object) Once you can see the object, move to the higher power eyepiece to center on the object and then align the led pointer so the red dot is also centered on the object.
After this initial alignment, pick a night that the moon is out and try it.
Note: The 114 shows correct image (right side up and left to right) unlike most other scopes. It is a nice telescope/ ( I have the 130mm)

Jul 03, 2011 | Celestron AstroMaster 114EQ (100 x 114mm)...

1 Answer

With the lint screen removed, a metal object was dropped down the opening.How do I get it out?


An expandable Magnetic pick up grabber:
http://www.amazon.com/Telescopic-Magnetic-Pick-Grabber-Black/dp/B000RB3XA6

If not, you may need to remove the panel to get it out

Jun 09, 2011 | Kenmore Dryers

1 Answer

Do not no how to set up pointer is not working


On the back of the machine there is a small hole down near the lower right corner of the data plate. Insert a small object (straighten paper clip, tooth pick?) and hold it down for about five seconds, this reloads the factory settings. Then start the machine as usual.

Nov 29, 2010 | Sylvania G-Netbook

1 Answer

Using Word and inserting an object in document how do i print the document with the object showing ---confused


When i insert an object, clip art, excel spreadsheet. I always click outside of the object and revert back to WORD. If the object is in focus, being used, the object will be picked up by the printer as the only thing to print.

Just click outside of the object and go back to the WORD document.

Sep 28, 2009 | Microsoft Windows Vista Home Premium with...

1 Answer

Canon mf3110 does not pick up paper


Hi,

The unit may have a paper jam or stuck object inside, if you have experience a paper jam error before, check the printer for any object or paper stuck inside, clean roller.

Some error like this can be a problem on the feeder sensor and by this time you may need to replace and repair the unit.

Hope this initial info helps

Aug 22, 2009 | Canon MF3110 All-In-One Laser Printer

1 Answer

My Casio waveceptor tough solar watch will not pick up its signal


You may have wrong manual. Follow this link and find correct one:

http://world.casio.com/wat/download/en/manual/

Rate me, please.

Jul 28, 2009 | Casio Watches

1 Answer

Problem working with ATI HD 2400PRO card and Google Sketchup


Hi.

You can always try updating graphics drivers. The most recent drivers can be downloaded here. Release date is 12/10/2008, version 8.12.

---
Your responses are intended to improve the level of service provided. Please rate your experience.

Jan 21, 2009 | ATI RADEON HD 2400 PRO Graphic Card

Not finding what you are looking for?
Meade TeleStar 60AZ-A Telescope Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Meade Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3186 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Meade Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...