Question about Nokia N95 Cellular Phone

3 Answers

Complete cover change

Have bought complete set of covers including keypad but it came with no instructions at all.
Can anyone help please.

Posted by on

  • stobbie Mar 30, 2008

    Hi Ray,

    I always wondered where God,s little helpers were hiding and now I have found one.

    Many thanks.

    You are an absolute STAR.

    Best wishes and warmest regards,


  • bsbycakes Apr 11, 2008

    i need to change the cover of my N95 but don't know how or were to



3 Answers

Its very easy, you need an T5, lets start

1. you have 4 schoeves. 2 on the top and 2 under.
2.take the schoeves out with the T5. you can easy open the faceplate with your dum.on the top where the speaker is open it.
4. remove the speaker in the face plate.
5.set the speaker from your original faceplate on the new one
6. just click the new faceplate on it
7. set the schoeves back in it..

gr mike. (sorry for my bad english i am dutch =)

Posted on Jul 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Its very technical to remove face and back. You need soecial tools and some know how. U tube has demo, go get it

Posted on Apr 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,017 Answers

Go to my site and download the service manual for the N95. The link will be there for 1 week from today.
complete cover change - 91601c8.jpg

Posted on Mar 29, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Do I have to reprogram my lock after changing the battery?

Does the Schlage Keypad Lock or Keypad Deadbolt need to be reprogrammed after changing the battery? The Schlage Keypad Lock and Keypad Deadbolt does not need to be reprogrammed after replacing the battery. All settings are retained in the memory of the lock, including valid user codes and the programming code.

I'm including a link to the pdf file of the complete installation and programming instructions:

You may also find more useful information on this page:

Apr 05, 2011 | Schlage Camelot Deadbolt Keypad, Satin...

2 Answers

Nokia 7610 keys 3,5 and * not working. pls help. thanks....

i think this is a dusting problem so open your cover & clean your keypad if problem not solve then
change your keypad or check their hardware..

Jan 23, 2011 | Nokia 7610

1 Answer

Its hard to open the battery cover, please help me

Want to change how your Nokia E71 looks? Why not try a different colored keypad or faceplate? Here are photos and instructions which show you how you can do it yourself. Even though it’s simple, I have to warn you to only try this if you are prepared to risk ending up with a broken phone.
For the extra faceplates and spare parts, many people seem to like CNN.CN. They include the Nokia E71’s faceplate, bottom cover and even a whole body replacement. The instructions below will show you how to remove just the faceplate and bottom cover.
I purposely omit the instructions that will enable you disassemble the phone further because the photos just look plain scary.
Steps battery-cover.jpg
Release battery cover.
Remove battery cover.
Unscrew four T4+ screws.
Open the two clips.
Do the same on the other side.
Lift the bottom of top cover NOT the bottom cover!
Remove the top cover as shown.
Press out the qwerty keypad.
Remove bottom cover.
Result That’s it! Here’s a sample result from HoFo member rapidstar who replaced the keypad on his Grey Nokia E71 to white.

Dec 17, 2009 | Nokia E71 Smartphone

1 Answer

How to change full cover on nokia E71? step by step guide

Nokia E71 Housing Fascia Replacement Faceplate Cover, Restore your ... or alternatively use the corresponding tools to change it by yourself.) Package include: Full Housing Replacement Cover for Nokia E71

Full Housing Replacement Cover for Nokia E71 (Grey) * 1
Front Cover
Back Cover
Middle Cover
Accessories as the picture shows
Keypad *1
T6 Screwdriver and an opening tool

Aug 12, 2009 | Nokia 6085 Cellular Phone

1 Answer

How to change code

Take the cover off the back of the unit where you are supposed to install the batteries. The instructions should be inside the cover. Hope that helps.

Jun 03, 2009 | Kwikset 907 907-15 Satin Nickel Powerbolt...

2 Answers

Set change problem

go to any of the nokia care service center for more help

May 25, 2009 | Nokia 5130 Cellular Phone

1 Answer

I need instructions on how to replace the facia on a w910. I have the replacement cover inc keypad etc but not sure how to do it .


here is the service manual that can give the complete data including ur problem


dont forget to rate it as it will fix the issue

Mar 31, 2009 | Sony Ericsson W910 Cellular Phone

2 Answers

I need to remove front and back fascias of my 6500 classic

I had the same problem. Watch this video for full instructions.

Dec 08, 2008 | Nokia 6500 Classic Cellular Phone

3 Answers

Printer error Info code=021

Hi, machine error/info codes usually require service. Attempting the following involves some risk, you may loose complete access to your unit or not do anything at all. It is strongly recommended that you call a qualified service personnel/professional. However, if you feel like giving it a try while praying..... reset the system: Power on, wait for a minute or two, Function button, 7 (keypad), Monitor button (4X), soon as you hear the beep punch * (keypad). You will now be in the service menu. If no service menu, stop, do not power off, unplug. If in service menu, 7 (keypad), Set, go to Reset Option (arrow down one step), Set. Unit will prompt you to reset, press 1 for yes, system will confirm that it has completed resetting. Go back to main menu (Stop button), power down, wait again for a minute or two, power up. Please remember that resetting may, can and will erase all your personal settings and preferences including day/date/time, etc. The above steps may make your unit completely useless. If still you have the 021 code, you can brute force it to reset. Power on without a toner cartridge. In self-test, it will check itself and reset many functions to determine faults (including toner cartridge and your code 021). Wait again for a minute or two, Power off, reinseert the toner cartridge, wait again for a minute or two, and power up. If all else fails (including the prayer) pls go back to the first paragraph. The above steps are not mine but were described by a good samaritan. Hope this works out for you and lots of luck.

Apr 24, 2007 | Panasonic Panafax UF-595 Plain Paper Laser...

Not finding what you are looking for?
Nokia N95 Cellular Phone Logo

Related Topics:

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18415 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides