Question about Panasonic Viera TH-50PZ80U Plasma TV

1 Answer

When turn on tv goes to stand by mode and light blinks more than 10 times. have unhooked all additional cords to the tv and this has not changed. when turn on tv it clicks like it is trying to come on then clicks again and the stand by light blinks. have unplugged tv cord for hours and plugged it back in and thi continues to happen.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,457 Answers

Ur tv power supply board it defective,it have dead parts call capacitors.U know basic electronnic's and soldering?Take ur tv aparts,where the a/c power cord go into it.That ur power supply board,searches all around the power supply board and it supporting boards.Look for these dead gases leakage capacitors,they all have bulges on it top or puff up on it top.Replaced these dead gases lekages capacitors,will get ur tv power back,stable and work.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Posted on May 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV turns red,shuts off, stand-by light blinking 8Times


Eight blinks - Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.

Feb 27, 2014 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Sony FD Trinitron WEGA


Here's my suggestion , unhook all the external components to the TV and leave the TV unplugged for more than a few minutes (a day/overnight). The next day plug the TV into the wall outlet (not the powerstrip) without anything hooked up to it, and turn it on. See if it comes on. Sometimes unplugging for a few minutes/hours is not long enough for it to reset itself.

Dec 28, 2007 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

My sony tv automatically goes into stand by mode and we have already changed the power supply as solution given by fixya .com


If the unit is playing normally then goes to stand-by, it could be also caused by the main board and or the ballast boards. If it is caused by the ballast boards, it should give you error code with the red stand-by light blinking 11 or 13 times. If the stand-by light does not blink a code, it is probly the main board.
I hope this helps,
Skyassoc

Dec 08, 2010 | Sony KLV32S400A 32 in. LCD TV

2 Answers

Tv wont come on and a red light is blinking. I have a Sony Wide screen projection TV model kp-46wt520


Can you unplug the TV for about 15 seconds, and then plug back in and watch the stand-by light. Tell me how many time the stand-by light blinks in regular intervals. If it doesn't blink at all, you need to change a fuse on the g-board. Once this is done run back through the stand-by blink light process, and more troubleshooting can be done if problem isn't already solved. If the stand-by light just keeps blinking with a count over ten just tell me, and I'll look for other possibilities.

Oct 25, 2009 | Sony KP-46WT520 46" Rear Projection...

4 Answers

Tv tunrns on then goes to stand by flashes 4 times & repeats


turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Mar 13, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

2 Answers

TV stand by light blinks 10 times on powering ON


Replace Both of your STKs 392-110s up grade to 180s.

Aug 25, 2008 | Sony Grand WEGA KDF-42WE655 42" Rear...

2 Answers

Sony kdp-65ws550 stand by problem HELP.


You tv needs repair this is no easy fix it yourself thing, take to repair shop.ThankYou for using FixYa . Have a Nice Day.

Feb 08, 2008 | Sony Grand WEGA KDP-65WS550 65" Rear...

1 Answer

TV Problem


the red blinking light is a code that tells you what is wrong it will blink from 1 to 10 or just blinks all the time

Jan 03, 2008 | Sony KV-32S26 32" TV

1 Answer

Power goes off automatically


The flashing light is not a stand by...that a service light telling you it has a problem that needs to be fixed...

Apr 14, 2007 | Panasonic TH-42PD50U 42 in. Plasma EDTV

Not finding what you are looking for?
Panasonic Viera TH-50PZ80U Plasma TV Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...