Question about Hitachi 51F59 51" HDTV Projection Television

2 Answers

51"hitachi tv needs convergence module.What would it cost to fix.

Friend wants to give me a 51 inch hitachi tv says it needs convergance module.They are giving the television to me would it be worth it to fix?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,476 Answers

Depending on whether your friend's diagnosis is right and whether that is the only problem, perhaps. Certainly if it is free you would have nothing invested beyond the convergence repair. Run it first and make sure that that is the only problem and other than misconvergence it looks good. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains the problem, how to repair it and where to get the parts. Let me know if you need more help.

Thanks for using FixYa and for the generous rating.

hardrocko

Posted on May 12, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I dont have a "solution" to your question. But i DO own this model and it is amazing. I highly suggest you accept the offer if you have not already

Posted on Oct 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi, i have 2003, 57 in" hitachi rear projection tv, model #57G500A. the problem is a thin wavy line across the top and bottom of the screen. could you tell me what would cause that.thank you for your...


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D pictures look alike?Yes,the tv convergence board have 2 dead convergence ICS and some or all of it resistors too.These parts must be replaced on the tv convergence board to solved the tv convergence picture problems.The shop,will cost u $300-350 for parts and labors.

Mar 21, 2011 | Hitachi 51F500 51" Rear Projection...

2 Answers

Why is the picture like double vision blurry?


The tv have a problems known as a convergence problems,it dead.Tv have R,G,B colors lines mis alignments,have colors shadows pictures or 3D pictures look alike?The tv have a dead convergence board,tv convergence board require changes 2 STK convergence ICS and some or all of it resistors too.Fixed the tv convergence board will solved the tv convergence pictictue problems.The shop,will cost u like $300-350 for parts and labors.

Feb 24, 2011 | Hitachi 51F500 51" Rear Projection...

1 Answer

Ghost image in red and alot of red color. This occurs all the time. I have tried magic focus and manuel focus. No change


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?This tv have a dead convergence board.The tv convergence board must require replacing 2 STK convergence ICS and some or all of it resistors too.Fixing the tv convergence board,will solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 09, 2011 | Hitachi 51F500 51" Rear Projection...

1 Answer

I have hitachi prjection hdtv, kinda old recently the color green stands out way too much.. pretty much all you see is green


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Jan 10, 2011 | Hitachi 51F59 51" HDTV Projection...

1 Answer

We own the PT51HX41 51 inch rear proj. We are getting a green and red glow around all pictures and wording. Are the bulbs gone or do they need to be adjusted...


The tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors.These parts on the tv convergence board are dead,must be replaced on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 05, 2010 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

51 Hitachi rear projection 6 years old, can't get it to focus, Has sound. Can only get the picture to come in abpout 80%. Around the perimeter, sports scores and subtitels are not readable. Used the fucus...


Flash Focus magic button no longer work.The tv have a problems known as a convergence problems,it dead.Tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures problems.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced on the tv convergence board to solved the tv convergence picture problems.The shop,will cost $300-350 for parts and labors.

Oct 13, 2010 | Hitachi 51F500 51" Rear Projection...

1 Answer

Red shade to ever one


Convergence are dead.Must know how to solders?Must replaced 2 STK convergence ICS,and some or all it resistors.Tries Websites like Tv repair world.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300-350 for the parts and labors.

Apr 20, 2010 | Hitachi 51UWX20B 51" Rear Projection...

1 Answer

Double image


Problem seems in convergence out section.

TV needs Convergence Out ICs replacement.

If you have TV repair experience and know good soldering work then you can give it try OR get help of qualified TV tech to fix it.

If you need further help, let me know.

Dec 30, 2008 | Hitachi 51GWX20B 51" Rear Projection...

1 Answer

ERROR CODE 5 on Hitachi 51 inch


You have a bad convergence circuit, very common problem. A good repairman will run you around $400 to do the repair.

Let me know if you have more question.

Tim Nolan
Experttv@comcast.net

Oct 12, 2008 | Hitachi 51F59 51" HDTV Projection...

2 Answers

Color is warped and wrong


A convergence amp has failed. Very common. Plan on just replacing both STK modules (big flat circuit modules mounted on a big heat sink) with upgraded parts. Good ones cost about $40 each. Then readjust the convergence. Total cost at a shop is $250-$400.
Hope Ya Fix It.

Feb 07, 2008 | Hitachi 53SWX10B 53" Rear Projection...

Not finding what you are looking for?
Hitachi 51F59 51" HDTV Projection Television Logo

Related Topics:

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...