Question about Texas Instruments TI-83 Plus Calculator

1 Answer

It has new batteries but does not turn on - Texas Instruments TI-83 Plus Calculator

Posted by on

  • Adnan Bhatti
    Adnan Bhatti May 12, 2010

    Verify that the polarity is correct(+ve to +ve and -ve to -ve). Inspect the battery terminals; are they corroded? In addition to these batteries there is also a button cell as a back-up battery, replace that also. Refer to the user manual for the location of the button cell.

  • kakima May 13, 2010

    TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible. Does it?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Texas Instru... Master
  • 102,366 Answers

Having received no response in over a month, I assume this is no longer a problem.

Posted on Jun 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

John Deere LA140 won't turn. New battery. No sound when I turn the key. No headlights, what should I do?


Check your connections at the battery. May have a bad ground or bad battery connection. Also check to make sure new battery is good by supplementing with a jump start. If new battery is good and connections are solid, you most likely have a broken wire somewhere. The lights may only work with the mower running though. I believe on my LA105 the lights only come on with the engine running and dim/brighten with the RPM of the engine.

Apr 07, 2013 | Garden

1 Answer

Bought new battery for cell phone, wont charge or turn on


did you try a new charger not the best solutinon

Jun 11, 2012 | LG Rumor 2 Cell Phone

1 Answer

Camera has new batteries but will turn on a few seconds & then go off & now the lense is stuck & will not go back in or turn on HELP????


You should charge your new Nikon Coolpix L10 battery before using it for the first time. And if you continue to turn on it and discharge the battery again and again until can't turn on, the new battery maybe damaged. come to Nikon EN-EL10 Battery and see the battery maintaion.

Dec 27, 2010 | Nikon COOLPIX L10 Digital Camera

1 Answer

Battery charger says charged. camera will not turn on


Hi there i can 't get your these word." camera charger is blue, used battery and new,". Please let me know the battery is new or or its old? If its old then the battery life is finished. Thats why he can't store the power.
Thanks.

Feb 15, 2010 | Olympus Mju Tough 8000 Compact Digital...

1 Answer

Will not turn on even with new batteries


Here are the steps for the no power problem: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. (If it works then it?s your memory card that is faulty)

Jan 18, 2010 | Kodak EASYSHARE Z1285 Digital Camera

1 Answer

Wont turn on


1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).

2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera

3. Turn on your camera without the memory card.

Dec 31, 2009 | Kodak Easyshare C813 Digital Camera

1 Answer

I bought a new camara c433 in it won't turn on


1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera
3. Turn on your camera without the memory card.

Dec 08, 2009 | Kodak EasyShare C433 Digital Camera

1 Answer

New battery, new starter just installed wont turn over.


turn on your headlights ,then turn key like your going to try and start the engine and see if the headlights dim dramatically, then you'll know if you have a good connection to starter from battery, then check chg on new battery

Sep 26, 2009 | 1989 Ford Escort

Not finding what you are looking for?
Texas Instruments TI-83 Plus Calculator Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Stevan Milanovic

Level 2 Expert

261 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...