Question about Canon PowerShot A570 IS Digital Camera

2 Answers

The "Date Stamp" on the menu button is not highlighted. I need to date stamp all my pictures Alan Terry

Posted by on

  • aterry593 May 12, 2010

    I have a canon A570-IS, I need to date stamp my photos and the damp stamp option is not highlighted in the menu selections

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

For this Model, If you want to print the date on your photo then you must use postcard mode!

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 12, 2010

  • 3 more comments 
  • aterry593 May 12, 2010

    How do I get to post card mode, it is not in my menu selection

  • taran_2005
    taran_2005 May 12, 2010

    Thanks for your response!!

    You need to Set via Function Key. It should be explained in the Manual.

    Do you have the Manual for the same?

    Let me know,so that we could proceed.

    Hope i helped you.

    Thanks
    for using ' Fixya ' and have a nice day!!


  • aterry593 May 12, 2010

    I have the manual but there is no explaination about the potrai mode and it does not show up under funtion key

  • taran_2005
    taran_2005 May 12, 2010

    Thanks for your response!!

    The manual is :-

    http://www.it.ringling.edu/fileadmin/pdf...

    Read page 32

    Function Menu > Recording Pixels > PostCard

    Page 33 is Explained How you need to embede


  • taran_2005
    taran_2005 May 12, 2010

    Oops!!

    Continue - How you need to Embed the date in the Image data.

    Let me know,if needed further assistance.

    Hope i helped you.

    Thanks
    for using ' Fixya ' and have a nice day!!


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Hi,
Date stamp enables on Post Card image selection.
Set Post Card in menu and then enable date stamp.
Hope this info will help you.
Thanks.

Posted on May 12, 2010

  • 2 more comments 
  • aterry593 May 12, 2010

    I have a canon A570 IS, there is no Post Card setting in the menu selection



    Remember I need to date stamp my photos

  • Shahid Electronics
    Shahid Electronics May 12, 2010

    OK, its Canon A570 camera
    Make sure that current time and date has been set in camera to enable date stamp on images.
    That seems only necessary action to enable date stamp on images.
    Hoe this will help you.



  • Shahid Electronics
    Shahid Electronics May 12, 2010

    I was writing info for you and my assistance got rejected.
    OK, no problem.



  • aterry593 May 12, 2010

    Please send, The second advisor stated that I should have the date and time set in my camera and it is, but the date stamp is still not highlighted



    I need to date stamp all my photos

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you stamp date photos on the M580 easyshare camera


1. Press the Menu button.
2. If your camera displays a menu with tabs at the top:
a) Press the Right/Left buttons to highlight the Setup tab.
b) Press the Down button to highlight Date Stamp.
c) Press the OK button to add the date stamp to new pictures.
3. If your camera does not display a tabbed menu:
a) Press the Down button to highlight Date Stamp. NOTE: Depending on your model, Date Stamp might be within the Setup choice.
b) Press the OK button to add the Date Stamp to new pictures.

Apr 11, 2011 | Kodak EasyShare M530 Digital Camera

1 Answer

How do you date stamp pictures


1. Press the Menu button.
2. If your camera displays a menu with tabs at the top:
a) Press the Right/Left buttons to highlight the Setup tab.
b) Press the Down button to highlight Date Stamp.
c) Press the OK button to add the date stamp to new pictures.
3. If your camera does not display a tabbed menu:
a) Press the Down button to highlight Date Stamp. NOTE: Depending on your model, Date Stamp might be within the Setup choice.
b) Press the OK button to add the Date Stamp to new pictures.

Apr 11, 2011 | Kodak Easyshare M580 Digital Camera

1 Answer

Need for the date and time on the picture


Press the Menu button. Use cursor-up/down to highlight the Setup tab (three horizontal sliders) and press OK. Use cursor-up/down to highlight "Date Stamp" and press OK. Turn the date stamp on and press OK.

Mar 09, 2011 | Kodak EasyShare V530 Digital Camera

1 Answer

How do i turn the date stamp on so it displays on my pictures?


In any mode, press the MENU button. Use up/down to highlight setup (three horizontal sliders) and press the OK button. Use up/down to highlight "Date Stamp" and press OK. Make your choice and press OK.

Jan 21, 2011 | Kodak EasyShare V530 Digital Camera

1 Answer

How do I get the date stamp off the image?


  • 1

    Press the "Func./Set" button and select "Recording Pixels" and "Postcard". The camera is now set to "Postcard" mode.

  • 2

    Open the "Rec." menu by pressing the "Menu" button on the back of the camera.

  • 3

    Highlight "Date Stamp" by pressing the down navigation button.

  • 4

    Change the "Date Stamp" setting by pressing the right or left navigation button. Your choices are "Off", "Date" or "Date/Time". Choose "Off" to turn the date stamp off.

  • Jan 12, 2011 | Canon PowerShot SD960 IS Digital Camera

    2 Answers

    How to remove date stamp from screen?


    In the lower left corner of the back of the camera just to the right of the LCD screen is a button marked "disp" by pressing the button it will change the different screen modes on should show only the picture without the numbers or writing on it.

    Dec 26, 2010 | Canon PowerShot SX20 IS Digital Camera

    1 Answer

    I have a kodak EasyShare C315. I need the date stamp but can't seem to make it work on pictures. I have set and reset it. How do I make it show of pictures?


    In any mode, press the MENU button. Use up/down to highlight Setup (three horizontal sliders) and press the OK button. Use up/down to highlight "Date Stamp" and press OK. Make your choice and press OK. The date stamp will only appear on photos taken in the auto mode.

    Dec 03, 2010 | Kodak EasyShare Z1275 Digital Camera

    1 Answer

    How do you remove the date from the picture, but still have the camera associate the date in your computer? When I set the date, it started showing up on all my pictures and I do not want it there.


    Press the Menu button. Press cursor-up/down to select "Date Stamp" (rubber stamp icon) and press OK. Use cursor-up/down to highlight an option and press OK. Press Menu to exit the menu.

    Oct 13, 2010 | Kodak EasyShare DX4530 Digital Camera

    1 Answer

    How can I take off the date stamp on pictures? my


    Follow these steps:
    1. Press the Menu button.
    2. Select the Setup menu.
    3. Select the Date/Time Stamp feature.
    4. Turn off the Date/Time Stamp feature.
    5. Press the OK button.
    If you find my solution helpful, you're kindly requested to rate it. Thanks!

    Apr 04, 2010 | Kodak EasyShare Z712 Digital Camera

    2 Answers

    I AM TRYING TO SET THE DATE & TIME TO APPEAR ON MY PHOTOS.


    you can only do date and time stamp under function button go to bottom where you can change size of pictures -go to right to W or wide-this is only setting you can do date time stamp on-when you change pic size and go back to menu you will see it highlighted and you can now turn it on-equals about a 2-3 megapixel size picture only-also just leave settings alone and have printer add it-date and time our always in pic data and most printers can add it

    Jun 02, 2008 | Canon Cameras

    Not finding what you are looking for?
    Canon PowerShot A570 IS Digital Camera Logo

    Related Topics:

    214 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Canon Cameras Experts

    kakima

    Level 3 Expert

    102366 Answers

    TC CAMERA REPAIR.Com...

    Level 2 Expert

    168 Answers

    old marine
    old marine

    Level 3 Expert

    1972 Answers

    Are you a Canon Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...