Question about E-Machines eMachines Desktop PC

1 Answer

I have a emachine w3507 purchased in 07 it will

I have a emachine w3507 purchased in 07 it will not show on monitor screen just get a big e then sometimes goes all white also i cannot get in safe mode

Posted by on

  • Mark Zbylut
    Mark Zbylut May 12, 2010

    This can not be resolved online, you'll need a skilled tech to check it out. My guesstimate would be a hard drive issue, or a motherboard failure. Less likely is just a memory failure.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,354 Answers

U ahve problem with your display setting or display is not working properly

if your able on your computer that on destop screen click right butone of mouse from there properties then settings there will display setting

screen resolation 1280 by 800 pixels

color qulity highest (32bit)

try this hopw fully proble will be solve

Posted on May 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I go to get an updated codec for my emachines w3507


Hello you can download the vlc player here:

http://www.videolan.org/vlc/

It does play dvd you can even record a clip of your favorite movie
Click on show and select advanced controls when the program is installed

And here is a free burner:

http://cdburnerxp.se/

I use this codec:

http://www.codecguide.com/

Good luck

Aug 14, 2012 | eMachines W3507 PC Desktop

1 Answer

How do i find safemode on my emachine w3507


On most PC's, shut down your machine, wait a minute or so, power it back up and start tapping the F8 button until you see the prompt for safe mode.

Mar 22, 2011 | eMachines W3507 PC Desktop

1 Answer

Emachine w3507 blue light only comes on fan runs nonstop, no signal or monitor, pressing the f8 did nothing


If you get nothing but a blue light and no video at all it sounds like you have a bad power supply. They are easy enough to check and replace but not for a first timer. If you know someone who knows more; get a volt meter and put it on the DC scale. Unplug a power plug to a drive or find one that is not used. Measure the Yellow to black and then the red to black wires. You should get 12 & 5 volts respectively.

Apr 18, 2010 | eMachines W3507 PC Desktop

1 Answer

Emachines w 3507 desktop isnt recognizing sdhc card


This PC was made before SDHC was finalized so the built-in media reader will not read SDHC. You will need to purchase an SDHC compatible media card reader device. I've seen them for as little as $3.99 and they just plug in via USB.

Mar 15, 2010 | eMachines W3507 PC Desktop

1 Answer

My niece just called and her emachines w3507 doesn't boot,the light on the front lights and a fan comes on a little louder than normal but nothing else happens,no harddrive light or noise ,screen says no...


start ur computer press F8 rapidly if popup menu came then goto safe mode,if not then u have a problem in ur ram.but u say its giving no signal thats mean vga resolution may be not compatable with ur monitor.go to safe mode and remove ur vga driver and restart ur pc if u have a vga problem.
still u facing a problem then better chage ur ram

Mar 06, 2010 | eMachines W3507 PC Desktop

1 Answer

I need recovery disk for a emachine w3507


You can purchase recovery software specific for your machine (you will need your computer's serial number) here:

https://secure.tx.acer.com/RCDB/Main.aspx?brand=emachines

I believe it is around $20, plus shipping costs.

Hope this helps.

Feb 01, 2010 | eMachines W3507 PC Desktop

1 Answer

Restore disks


Does not seem to be one available,art least not from the website.
Have you tried a restore to the earliest date? There is a contact phone number on theire website. Another option is to purchase an Win Xp disk.

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W%20Series&model=W3507

Jan 19, 2009 | eMachines W3507 PC Desktop

1 Answer

Stuck on emachine screen


Hi there
Hit F2 on boot up and get into the bios settings, if it lets you in choose default bios settings, save and reboot, see what happens

Good luck

Jan 08, 2009 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...