Question about Denon AVR-2800 Receiver

1 Answer

Digital lock doesn't work

On auto mode, have a problem with the digital lock staying on for 5.1 .  Any suggestions.

Posted by on

1 Answer

Possible processor malfunction, have unit checked by pro/tech

Posted on Apr 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Auto format decode means?


HI,
There are so many audo formats like Dolby Digital Decoding, Dolby Digital EX Decoding, Dolby Pro Logic Decoding, Dolby Pro Logic II, Dolby Pro Logic IIX Decoding, dts 96/24 Decoding, dts Decoding, dts NEO:6 Decoding and dts ES Decoding Stereo etc. What ever the AVR get a digital input It will decode the format and convert the same While it in the Auto format mode. If auto format is not selected it will convert the same in to stereo.

Ajin

Feb 09, 2012 | Audio & Video Receivers

1 Answer

My RX-V665 receiver lost its sound for no apparent reason while we were watching a show. It was in HDMI mode and has the message "Decoder Off". The sound works with a DVD and a CD, just not...


It's telling you the digital decoder is now "off" and will treat everything like 5.1. THAT is a selection you choose, not a status that spontaneously appears. Perhaps someone unknowingly touched the remote while playing.

Get the manual out and read up on DECODER. Page 61 (Troubleshooting: NO SOUND) suggests "A proper audio decoder is not selected". Try AUTO.

Or, track the digital source of your TV audio back to make sure it still works.

Jun 15, 2011 | Yamaha RX-V665 Receiver

1 Answer

Denon AVR-1403 receiver switched from digital to analogue.


There are three modes (Auto, DTM, and PCM) on the input mode switch, on the main unit, selected by repeatedly pressing the input mode switch.

However, if you have already depressed the Analog button in, on the main unit you have predetermined the mode as analog.

On the remote, the INPUT MODE switch combines toggles for 5 choices, [Auto, PCM, DTS, Analog,
Ext. input]


My guess is that either the input mode switch on the main unit and/or the remote are toggled to analog.

Apr 11, 2009 | Denon AVR-1403 Receiver

1 Answer

Clicking noise from Onkyo TX-SR606 during television broadcast


I seem to recall a sub-menu setting having to do with "auto shut off" or something like that.

My receiver is packed up, ready to take to Fry's, or I would find that submenu for you.

Jan 04, 2009 | Onkyo TX-SR606 Receiver

2 Answers

No sound on the Denon receiver


If you are set up for 5.1 surround you may need to buy a digital coaxil of optical cable to receive the signal to the amp!

Jan 03, 2009 | Denon AVR-485 Receiver

1 Answer

Out to speakers only in 5CH mode, or front L/R


set it on dolby digital mode not sterio mode should be differnt modes on a ch only use prologiic or spin the mode dial to doby digital on movie on direct tv wont be dobly fake suround more less but center should work change settings modes

Jan 26, 2008 | Denon AVR-2807 Receiver

1 Answer

No Audio coming from DVD source


Press the input select button on front of receiver until auto is displayed it may be set for analog. Auto mode will play digital signal first then if it does not see a digital input it will check for analog signal. I would set it to auto for all inputs you may use.

Jan 10, 2008 | Denon AVR588 Receiver

1 Answer

Digital optical from DVD player produces no audio


Hi, It sounds like your receiver is still looking for audio on the coaxial connection, rather than the optical.

1. Make sure the optical connection is between your DVD player and the LD/DVD Optical In on the back of your receiver.
2. If you have a monitor connected to the receiver to show the on-screen display, click Setup from the main menu, click Input Mode, then, next to LD/DVD choose Optical. It may be set to coaxial, analog or auto.

Alternatively, choose the input source on the front of your receiver (LD/DVD), then press Input Mode button (bottom right, near the input selector) till it displays Digital Optical.

If all else fails, reset the receiver by:
1. Turn off the receiver
2. Hold down DISPLAY and PANEL UP/DOWN buttons and press power.
3. All Clear should appear on the screen.

Use caution, however, as this will erase all the settings in your receiver.

Nov 28, 2007 | Sony STR-DA90ESG

2 Answers

Problem with Dolby Digital mode


If it is a new DVD that may be a problem, as signal changes may be frustrating this old machine... but it is likely the cabling from the DVD player to the reciever. Are you on the right channels/settings? is the optical cable and digital cable recieving digital output from your DVD player? Try changing those settings and you should be in good shape Thanks! good luck!

Jul 22, 2007 | Yamaha RX-V3300 Receiver

Not finding what you are looking for?
Denon AVR-2800 Receiver Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...