Question about Microsoft Windows Vista Ultimate Edition

3 Answers

Microsoft Lifecam 1.1

Can't download software for my Microsoft Lifecan 1.1 on my Vista PC

Posted by on

  • 12 more comments 
  • Rena3 Mar 29, 2008

    All The Software has on it is "Mocrosoft Lifecam 1.1" I have always had it running on my XP but now have Vista. Also can't download the software for my HP 1300 all in one series printer.

    So Frustrating!! I wondered if there was someway to tell Vista to accept these. Thanks Rena3

  • Rena3 Mar 29, 2008

    The only Number I can see is on the disc and it is 0406 PartNooX12-39775-01

  • Rena3 Mar 29, 2008

    Thanks a million You are whizzes I now have my webcam up and running. Thanks so much I am so pleased


  • Rena3 Mar 29, 2008

    Once again thanks for your fantastic help I now have my printer working Couldn't have done it without your help.


  • adam prenger Mar 30, 2008

    my dv player doesn't work and i need the software for my webcam lifecam 1.1

  • adam prenger Mar 30, 2008

    i need the software for my webcam lifecam 1.1

  • Rena3 Mar 31, 2008

    I have another problem.

    I had a new serial port added to my computer but the computer does not recognise it as the Technician failed to send me the CD

    Is there any way I can download anything to help

    Thanks Rena3

  • Rena3 Apr 08, 2008

    Thanks heaps - all up and running Rena

  • Anonymous Apr 23, 2008

    microsoft webcam 1.1

  • Anonymous May 01, 2008

    where can i find teh software for my lifecam 1.1 so it can be compatible with vista? thanks

  • sebyy Nov 12, 2008

    i got a windows vista cant sintall softwae!!!:(

  • joe_martin48 Nov 17, 2008

    I can't get my Microsoft lifecam v 1.1 working now that I have Windows vista.

  • Dave MacPhee
    Dave MacPhee May 11, 2010

    There must be more to the lifecam version.. I can tell you where to go to download the software, but it may not be the correct one..

  • Dave MacPhee
    Dave MacPhee May 11, 2010

    what is the exact model number?? (IE nx-3000, etc...)


3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 236 Answers
  • 3 more comments 
  • Dave MacPhee
    Dave MacPhee Mar 29, 2008
  • Dave MacPhee
    Dave MacPhee Mar 29, 2008

    Glad I could help!!!

  • Dave MacPhee
    Dave MacPhee Mar 29, 2008

    once again, glad I could help!!!

  • Dave MacPhee
    Dave MacPhee Mar 31, 2008


    Any addition info on the serial port? Model number, make, etc...?


    The software for the lifecam is listed in my post. For the DV problems, could you post a new thread or send me a request, as I would like to keep that issue seperate and not clog up this post.


  • Dave MacPhee
    Dave MacPhee Apr 08, 2008

    Glad to hear everything is running smoothly!


Thanks but I did get the Webcam going I downloaded from something someone posted on this site for me


Posted on Apr 08, 2008

Hi Adam Got the problem sorted. Had a driver sent to me in a zip folder so all up and running thanks

Posted on Apr 08, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Microsoft Lifecam HD-3000

Did you install the original software or downloaded the latest from the web?

Be sure to download the correct version for the OS you are using.

Jan 29, 2014 | Computers & Internet

1 Answer

I am having a problem with my Microsoft LifeCam Cinema,because every time i press it to open it another screen pops up and it says that the Life-Cam Cinema has stopped working then it just goes away by...

The message that appears " Life-Cam Cinema has stopped working" upon invoking the button can be the result because of

(1) Software corruption (including the Operating System)
(2) Software clash issues with other software.

In order to fully resolve the problem first make sure that there is no other USB device connected to your PC and that the only device connected is your Camera.

First run Disk Cleanup go to Start> All Programs > Accessories> System Tools >Disk Cleanup. It will delete useless files on your PC.

Start >type in Search box (in case of XP it is the RUN box) > type "cmd" find at top of list cmd > RIGHT CLICK - RUN AS ADMIN
sfc /scannow

Then use the command chkdsk to check the health of the hard disk of your PC. To do that go to start menu and in lower box of the Start menu where it says Run in Xp and " Search programs and files" (In case of Vista and 7) type cmd A black screen will apear type "CHKDSK" and hit enter to find errors in the your PC disk drive.

If these two steps come out to be ok than If you have Windows XP service pack 2 if you already do not have one. Please note that Windows XP service pack 3 is not for everybody as Microsoft warns. Please avoid it as it can complicate the problem for you. Similarly keep your windows updated with latest service packs (which in our case in SP2)and Windows updates in the case of Windows Vista and Windows 7. You can find service pack downloads from Microsoft's official website.
After doing this do the following
  1. Log on to the computer by using an account that has administrator rights.
  2. Click Start type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility.
    If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
  3. On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
  4. On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.

    Note Following this step lets Microsoft services continue to run. These services include Networking, Plug and Play, Event Logging, Error Reporting, and other services. If you disable these services, you may permanently delete all restore points. Do not do this if you want to use the System Restore utility together with existing restore points.
  5. Click OK, and then click Restart.
When you restart the computer if the message bothering you persists than it is evident that the problem is not caused by Windows components which is usually the case. If the problem disappears please follow the problem on the following link.

Suppose the error remains. Do look for the following software on the your PC whether one or more are installed on your PC
This issue may occur if you use one of the following programs together with LifeCam:
  • EarthLink TotalAccess
  • Venturi VClient
  • Nero
  • Pinnacle System's Studio 9 software
  • F-secure Internet security
  • Web Cyber Coach Dell
  • AOL or Yahoo toolbar
  • Fix it Utilities
If there are any software that are mentioned above than simply uninstall that or them.

If there no such software in your PC or the problem persists then do the following
Download and install the latest software loadTOCNode(2, 'resolution'); To download the most recent version of the LifeCam software, follow these steps to update or reinstall the LifeCam software:
  1. Visit the following Microsoft Hardware Web site: (
  2. Click Software for webcam and headset products.
  3. In the Select type of product box, select Webcams.
  4. In the Select your product box, select your LifeCam product.
  5. In the Select your operating system box, select your Windows version.
  6. In the Select your operating system language box, select your Windows language.
  7. Click Go.
  8. Click the link to download the most recent version of the LifeCam software.

Jul 25, 2010 | Microsoft Windows Vista Ultimate Edition

1 Answer

Korsan pirogram yada hatalipirogram




Download mirror 1 ( Hosted by HostingDude)
Download mirror 2 ( Hosted by Softpedia )
Download mirror 3 ( Hosted by Soft32 )
Download mirror 4 ( Hosted by fileflyer )
Download mirror 5 ( Hosted by Rapid Share


Oct 17, 2008 | Microsoft Windows Vista Home Premium with...

1 Answer

Life cam 1.1

I am not sure exactly what you mean by Life cam 1.1,
so I am assuming you are referring to the LifeCam
series of products made by Microsoft:

Since both the Vista OS and the camera are mad by Microsoft,
their tech support team should be able to guide you to download
the appropriate driver, or search for your product at:

Hope this helps, Martin

Apr 24, 2008 | Microsoft Windows Vista Ultimate Edition

Not finding what you are looking for?
Microsoft Windows Vista Ultimate Edition Logo

Related Topics:

2,881 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2635 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides