Question about Dryers
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Does the noise stop when you let off the start button? If so you either have a bad motor or something has gotten into the blower keeping it from turning. If the motor is running but drum not turning, you have a broken belt. Please post the complete model number from the dryer and I will try to help you with diagnosing and repairing the problem.
Posted on Jan 07, 2008
Hello Jack. To unlock your radio:
turn power off
while pressing the mode key, turn the power back on
I also left you a voice mail on your cell phone with this solution.
Posted on Jan 28, 2008
SOURCE: On a F and P
Its most likely the thermostat
It looks like this..http://www.apwapplianceparts.com/Products/WE4X592.jpg
and will need to be replaced. I would look for it at an appliance repair store. If they don't have it they can order it.
Posted on Mar 08, 2008
Our BR1 has just expired (the seal on the pan died). I contacted Breville and they don't do spares any more for this machine. I had replaced the pan in 2004, and so we had a spare undamaged paddle. E-mail me on firstname.lastname@example.org if you would like me to post it to you.
Posted on Jan 20, 2009
Testimonial: "Thank you for your reply and offer of the br1 paddle - I didnt get a message to my email address so I hadnt realised I had any replies. Thanks. "
Same thing happened to me on my 2002 trailblazer. The last few wraps of the cable was corroded to the point that it wouldn't unwind with the tool supplied. First thing to do is cut the crimped end of the cable off with a grinder or cut off wheel but don't forget to support the spare. This will get the spare out of your way then simply take out the 3 mounting bolts for the cable hoist. At this point you could buy a new cable hoist from the dealer and install it yourself or you might be able to do what I did. I managed to pull and remove about a foot of the rusted cable, slide the rectangular metal piece, that actually holds the spare at the center of the wheel, back on the cable and attach a 1/4" cable clamp to the end of the cable which of course must be in good condition. There should still be enough cable to re-attach your spare to it and hoist it back up. Don't forget to lube things up so it won't happen again. Good luck. (buying a new one sounds better, doesn't it?)
mikethemedic in Hawley,Pa.
Posted on Jan 30, 2009
Tips for a great answer:
Dec 01, 2016 | Kenwood Food Mixers
Jul 22, 2011 | Kenwood Car Audio & Video
Feb 23, 2011 | Kenwood KDC-W6027 CD Player
Dec 18, 2008 | Panasonic Radio Communications
Sep 28, 2008 | Kenwood Car Audio & Video
Dec 30, 2017 | Kenwood Radio Communications
Apr 11, 2008 | Kenwood FreeTalk XL TK-3101 (15 Channels)...
269 people viewed this question
Usually answered in minutes!