Question about Audio & Video Receivers

1 Answer

Forgot code there is a reset button but i forgot my code can't do any thing without the code that i forgot it has been about 4 years not 2

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Http://inform3.kenwoodusa.com/manuals/krcx957.pdf
this is the manual

you might have to contact a dealer about this one 1-800-KENWOOD

By the looks of the manual, you will need the code or need to guess it starting with all zeros and count your way up because this code is for anti-theft and was made to be hard to reset without knowing the code, good luck and let me know if you need further help

Posted on Mar 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I setup my Harman kardon AVR135 after 4 years not using it and it worked the first time. But then it doesn't respond to the remote nor does the buttons on the console work properly. Any solutions?


First thing I would do is change the batteries in the remote for fresh ones. If you haven't used it for 4 years the batteries must be a lot older. Not sure why the buttons wouldn't work. After the unit has been plugged in for say 24 hours, I would pull the wall plug and try again. There may be internal memory batteries that need to be recharged and reset.

Oct 27, 2015 | Harman Kardon Audio & Video Receivers

Tip

Reset factory default settings for yamaha HTR-5650 AV receiver


How to reset yamaha HTR-5650 AV receiver (maybe others) to factory default settings:

1. turn power off.
2. press the 6ch input and stereo button simultaneously for 4 seconds. Then while holding down these 2 buttons, turn the power on.
3. press preset tuning to the right until option #9 is selected.
4. Then, press program button until the *RV option is selected.
5. turn power off, wait 10 seconds.
6. turn power on, settings are reset.

on Feb 10, 2009 | Yamaha HTR-5650 Receiver

1 Answer

Code ck sr tuner no sound


Hello
So many improper commands send to the unit may make its system and memmory to be confused, and will not operate properly. Just reset the unit to factory settings, and try.
To reset the unit to factory default settings, so the following
[1] Press STANDBY/ON on the front panel to set this unit to standby mode.
[2] Press and hold TONE CONTROL and then press STANDBY/ON to turn on this unit. The advanced setup menu appears, in the front panel display.
[3] Press PROGRAM buttons to select PRESET.
[4] Press STRAIGHT repeatedly to select RESET.
[5] Press STANDBY/ON to confirm your selection and set this unit to the standby mode.

This procedure completely resets all parameters of this unit including SET MENU parameters. However the advanced setup menu parameters will not be effected. The intial factory paramenters will be activated next time when you turn on this unit. To cancel initilization procedure at any time without making any changes, press STRAIGHT repetedely ot select CANCEL and then press STANDBY/ON.OK.

Apr 03, 2011 | Yamaha RX-V463 Receiver

3 Answers

How do I reset my yamaha receiver htr5730


http://www.retrevo.com/support/Yamaha-HTR-5730-Receivers-manual/id/1075bh230/t/2/

Page 52

1 Hold down STEREO on the Front Panel
"Factory Preset" appears on the front panel
2 Press STEREO to select the desired setting.
'Reset' To reset to factory presets
'Cancel' to cancel without making changes
3 Press STANDBY/ON to confirm your selection

Jan 15, 2011 | Yamaha HTR-5730 Receiver

1 Answer

How to I reset my Harman Kardon AVR 5000 Remote control


Hi odysy

I got this from the manual page 43.

Resetting the Remote Memory
As you add components to your home-theater
system, occasionally you may wish to totally
reprogram the remote control without the confusion
of any commands, macros or ”Punch-
Through“ programming that you may have done.
To do this, it is possible to reset the remote to the
original factory defaults and command codes by
following these steps. Note, however, that once
the remote is reset, all commands or codes that
you have entered will be erased and will need to
be re-entered:
1. Press any of the Input Selector buttons 4
and the ”O“ button Hat the same time until
the Program/SPL Indicator 2begins to flash
amber.
2. Press the ”3“ button Hthree times.
3. The red LED under the Input Selector4
will go out and the Program/SPL Indicator
2will stop flashing and turn green.
4. The Program/SPL Indicator 2will remain
green until the remote is reset. Note that this may
take a while, depending on how many commands
are in the memory and need to be erased.
5. When the Program/SPL Indicator 2goes
out, the remote has been reset to the factory settings.

I am more than happy to answer any other questions you may have about it, please get back to me here, or use the ASK function to go straight to me :) If you are still unsure, have problems, or we need to look at the situation more deeply, then before you give a rating for this advice, hit the ASK button Thanks for using FixYa, If you consider the advice I have given you as sound, a FixYa rating is a great reward for my efforts to help you. Cheers.

regards robotek

Jun 29, 2008 | Harman Kardon Audio & Video Receivers

1 Answer

I forgot the security code on my kenwood car stereo. Is there a way to reset the code? I bought it like 10 years ago its a kenwood krc 508s. Please help. Thank you.


I read this on ecoustics forum:
You could try this:

When you are asked for the code, press and hold the 'AUTO' button and "Next Track" ">>|" for 3 seconds till the (----) disappear.

Now take the remote control and Type "KCAR" with the number pad.
PRESS "5", "5", >>| (NEXT TRACK) you should have a "K"
PRESS "2", "2","2" >>| (NEXT TRACK) you should have a "C"
PRESS "2", >>| (NEXT TRACK) you should have an "A"
PRESS "7", "7", you should have a "R"
PRESS >>| (NEXT TRACK) and hold for 3 seconds

If successful you will see 'Approved' and the stereo will go to standby screen

Good luck

Apr 03, 2008 | Audio & Video Receivers

1 Answer

1995 V.W PASSAT


Hi,

If I understand your post right, you have the code but need the procedure on how to input/enter it into the radio. To my understanding, a 1995 Volkswagen Passat would have a non-BOSE unit with or without CD changer controls. It was a premium sound system with anti-theft coding.

Pls try:
1. Power the radio ON till "SAFE" is displayed;
2. Press the AM/FM and SCAN buttons simultaneously till display shows "1000". (In some versions, it is the seek and the two scan buttons);
3. Release the AM/FM and SCAN buttons;
4. Enter your security code using the first four station buttons on the radio;
5. The first button changes the first number of the four digit code;
6. The second button changes the second number and so on and so forth;
7. Once the proper code has been entered press the AM/FM and SCAN buttons at the same time and hold until the radio accepts the code;
8. You have two tries before the system will lock you out for an hour;
9. Should you happen to have a three digit code, pls make the first digit a zero;
10. The first digit can only be 1 or 0 (the 0 will not show up so for a zero, push the button until the 1 disappears).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Mar 08, 2008 | Audio & Video Receivers

1 Answer

Innovage jumbo universal remote


TV codes 0013, 0018, 0028, 0031, 0034, 0043, 0046, 0052, 0058, 0072, 0081, 0084, 0134, 0135, 0141, 0150, 0162, 0182, 0187, 0199, 0208, 1019, 1033, 1036, 1071, 1077, 1149, 1150
vcr codes 4015, 4032, 4012, 4020, 4052, 4017, 4039

Turn on device that you want to set
Aim remote at the device
Press the device button for the item you wish to program and the LED will blink once
Press and hold the set button unti the LED lights up solid red
Using the number keys, enter the 4 digit code from the list. After you have entered the 4th digit, the LED will turn off, indicating that the code for the device was recognized.
If the device powers off, test the functions for the other buttons (except OK button). If all the functions work, press the OK button to store the code. If the indicator light remains solid red after blinking 3 times the code is incompatable. You then need to restart back on step 2.
Make a note of the correct 4 digit code for future use.

COde search setting is an alternative method to programming your device without using the code list
Turn on the device you want to set
Aim the remote control at the device
Press the decive button for the item you want to program
Press and hold the SET button until the LED light up solid red
Press the MUTE/SEARCH button. The LED will shut off first then light up solid red.
When the device turns off, press the OK button to store this code.

Code Retrieval
Press and hold the device button you want to display on the remote control
Press the NUMBER 1 then count the number of flashes
Press the NUMBER 2 etc
Press the NUMBER 3 ets
Press the NUMBER 4 etc

If the LED light flashes 10 times the number is 0

Jan 23, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...