At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press any of the buttons on the control panel to see if the buttons are
operational or check to see if the "Control Locked" indicator light is
lit. If the control panel is operational, you may mistakenly lock the
door.
Press and hold the "End of Cycle Signal" button for approximately three
seconds until the "Control Locked" indicator light shuts off.
Thanks for using FixYa. To resolve this issue press and hold the END OF CYCLE button for 10-15 seconds. Please do rate the solution if the issue is resolved or else revert for further assistance.
Locking controls
The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled. You can lock the washer while it is
operating.
To lock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds.
The CONTROL LOCKED status light glows.
To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the
CONTROL LOCKED Status light turns off.
Press and hold 'dry' & 'spin', shd unlock OR Try holding the "end of cycle" button down for 5 or 6 seconds. You must hv done it accidently, it is the child lock device.
Pl. rate if helped.
×