Question about Office Equipment & Supplies

Open Question

Smps of wipro's printer model number 800 DX not giving output. what is the main cause of it ?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

moncapitaan
  • 78 Answers

SOURCE: printer problem

Sounds like its indicating a paper jam. Check for anything stuck inside the printer. If you cant see anything - Take the ink out and then turn the printer upside down and give it a real good shake. Put the ink back in and have another try.

Posted on Sep 02, 2007

  • 1 Answer

SOURCE: sir i have a printer lx 800 dx this gave self

A system has 100 watt of signal power going in to the channel with noise of 10 watt. In order to send 10,000 bits/sec. How much bandwidth is needed.

Posted on Mar 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My orion tv model number sled4668w just went black no sound no picture


Two possible faults:
1. Fault to the main power supply regulator [SMPS] section circuit. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician.
2. Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

Jul 11, 2015 | Orion Televison & Video

1 Answer

I LOST MY WIPRO LX 800 PRINTER DRIVER INSTAL CD. SO PLEASE GIVE ME A SOLUTION FOR ME FOR THAT PROBLEM IN QUICK.


http://www.wepindia.com/MIS/trackdownloads1.asp?driver=D128&OS=WindowsXP&model=LX800DX Use this to download the driver and install it from that file.

Mar 12, 2011 | Computers & Internet

1 Answer

We have wep LX 800 DX (WIPRO) printer and we want to work with printer on Windows XP. But we have no installer for the same. So kindly provide the said printer's installer. With regards, Guru Dutt...


you can download the driver from the link provided below

http://www.freedownloadmanager.org/downloads/printer-driver-wep-800-dx-365345.html

Sep 28, 2010 | Computers & Internet

2 Answers

I Want a driver for my WIPRO LQ 1050 PLUS DX DOTMATRIX PRINTER AND MY OPERATING SYSTEM IS WINDOWS VISTA. please guide me how this will work out... I have a usb cable connected to my laptop.. Nikul


If you have the CD which you might have received with the printer go ahead an install the driver software using the CD.

If you don't have the driver CD to install the Printer Driver go to this website to download the driver for the same.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Downloads&oid=14323&category=Products

If you are install the printer using the CD, try not to plug in the usb cable in the begning/ the driver software will ask you to connect the usb cable so try to connect it at that time.

Aug 14, 2010 | Epson LQ-1050 Matrix Printer

1 Answer

Sir i have a printer lx 800 dx this gave self


A system has 100 watt of signal power going in to the channel with noise of 10 watt. In order to send 10,000 bits/sec. How much bandwidth is needed.

Mar 31, 2010 | Printronix Refurbished P5212 DOTMATRIX...

1 Answer

My laser printer gives message open heat error how can I fix


This is most commonly caused by a failure of the Fuser unit.
However, in rare circumstances, this can be caused by the Fuser Control section of the SMPS, or the fuser temperature monitoring circuit on the Main Board.
There is a closed control loop:
1. AC voltage is supplied to the Heat Lamp in the Fuser from the Fuser Control section of the SMPS
2. The temperature of the fuser heat is monitored by a thermistor (mounted on the Fuser) connected to the Main Board.
3. The Main Board determines if the fuser temp is too low, correct, or too high and signals the Fuser Control to increase, maintain, or decrease the AC voltage to the Fuser
sorry io say but you had to replace the fuser
call dell costumer support and tell your model no. ask for fuser replacement and they will do it .
Hope your printer is in guarantee period otherwise you had to pay.
REGUARDS

Dec 13, 2009 | Dell 1600n All-In-One Laser Printer

2 Answers

Please give me WIPRO PRINTER customer care toll free number.


Go through the link below and you will be able to find the toll free number according to your region INDIA : http://www.wepindia.com/Support/Partner.aspx?sn=Karnataka&state=Ka&type=31


Jul 16, 2009 | Office Equipment & Supplies

1 Answer

Hi i loss my Wipro lx 800 cd iwant to install plz solve my problem


you just come to the printers and faxes and click on add printer and select local printer and uncheck the box which says automatically detect my printer. Keep the printer on LPT1 port. Once it takes you to the printer options select Epson there and then towards the right hand side of the screen you will be able to find the models of epson printer select LX 800 and then click next and install it. it will work fine with your Wipro LX 800 printer

Jul 14, 2009 | Office Equipment & Supplies

1 Answer

Printer problem


Sounds like its indicating a paper jam. Check for anything stuck inside the printer. If you cant see anything - Take the ink out and then turn the printer upside down and give it a real good shake. Put the ink back in and have another try.

Sep 02, 2007 | Lexmark X73 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...