No audio from monitor

No, there is no microphone listed in the specs, just integrated speakers

Monitors use your video drivers it should work as soon as you plug it in...

• Is it connected properly?
• Are you drivers up to date?
• Are you using a video card?

Visit this page:
http://apps.planar.com/downloads/touchscreen/

There you can enter the exact model and download the driver.

For your Plana Dome C3i you can get the drivers and CXtra calibration software under the cx section at ndssi.com. You must use a DX2 card (eBay) and XP. No go on W7 for those.

Only the Planar Dome DX2 card..... no other. Planar did this on purpose to sell those cards at 2k each. Now very reasonably priced on eBay, but they'll only work on XP, not W7.

Accord to the manufacturer, there aren't any. Just use a standard Windows driver for a LCD monitor. I just went looking for the same thing. :-)
http://planar.custhelp.com/cgi-bin/planar.cfg/php/enduser/popup_adp.php?p_faqid=302&p_created=1041022915

Double check that you have the speaker cable plugged into the proper jack (audio out - green) on the computer. Make sure that the audio hasn't been muted and that it is set for the correct output type (if you have a multi-channel audio option).

Try a standalone set of speakers to check if the audio driver for the on-board audio or sound card is working.

I hope this helps.

Cindy Wells
(I've found that the integrated speakers will fail before the monitor does. Since the integrated speakers are low-end and similar speakers are fairly cheap, get new speakers of a quality you like. Repairing the speakers isn't worth it.)

To use the integrated speakers on this monitor you will need the audio cable. Most monitors with built in speakers has a single cable with a green jack on both ends. It would plug into the audio jack on the back of your monitor and connect the monitor to your soundcard jack on the back of your pc. Cable should be able to be purchased at any electronics/computer store. Hope this helps.

bad back light

www.Ebay.com =)