Question about Brother DCP-8060 Laser Printer

1 Answer

Dcp 7030 error toner replace, i replace bout toner and drum but the error pop again..what was? the promble please help me..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

The printer needs to be clean and restore the factory settings

Posted on May 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ghost writing on my Brother DCP-7030 all in one printer


Ghosting on machines can be one of several causes.



  1. Poor Quality/ Damp toner - Replace the toner cartridge


  2. Worn Drum Unit - Replace the Drum Unit


  3. Fuser Unit Failing - Replace the Fuser Unit (Normally more than the printer is worth).


  4. Damp Paper - Open a new ream of paper and try printing again (This is the cheapest option to start with diagnosis).

Mar 27, 2014 | Brother DCP Office Equipment & Supplies

1 Answer

Error message "put the black toner cartridge back in"


I got this same error message on a newly acquired Brother DCP-7040 that I purchased used off of ebay.

As I was troubleshooting this unit (that I bought untested off of ebay - hey gambling has paid off handsomely for me many times before!), this error message kept popping up.

I checked the COUNTERS (page & Drum life) and found out that the DRUM had 0% life left. BUT, the reason it showed ZERO was because this unit did not have any drum! The toner cartridge (TN-360) needs to sit WITHIN the drum (DR-360) on this DCP-7040 unit, as well as in models DCP-7030, MFC-7340, MFC-7345C, and MFC-7440N.

So perhaps some of these "put the black toner cartridge back in" problems could be related to the DRUM (or lack thereof). A possible tipoff (since the toner cartridge actually does slide into the unit much like other units that do not use Brother's DRUM carrier) seems to be the relative ease with which the toner cartridge slides into the DCP-7040 and really doesn't seem to "lock" into position real firmly.

DCP-7040 USER GUIDES: http://welcome.solutions.brother.com/bsc/public/us/us/en/doc/manual_index.html?reg=us&type2=-1&prod=dcp7040_us_as&c=us&lang=en&flang=all

Apr 23, 2012 | Brother MFC-7340 All-In-One Laser Printer

2 Answers

How to solve this problem "drum error "


The Drum must be replaced It cannot be reset. There is a chip inside which configutres the default page counter. regular and high yield drums available http://www.bizrate.com/ink-toner-inkjet-cartridges/brother-dcp-7030-drum/

Feb 12, 2011 | Brother DCP-7030 Digital All-in-One Laser...

1 Answer

Brother 7030 printer drum end soon problem


that's not a problem, the printer warns you when your toner is soon to end. Get a new cartridge to replace it when it is all used up. Tip: Toner warning comes on early, you can get more pages out by taking the drum out and shaking it carefully.

Nov 03, 2010 | Brother DCP-7030 Digital All-in-One Laser...

2 Answers

I have a printer dcp 7030 brother company i am showing problem toner life end after reffling


I just had this problem and fixed it. The original toner cartridge that comes with the printer cannot be reset. You have to buy at least one new cartridge. The reason is that the original cartridge that comes with the printer doesn't have a reset flag. You can, however, refill/reset a cartridge that you buy separately. Pull out the drum and lift the cartridge out of the drum. Hold the handle and look on the left end. You should see a crescent shaped hole with a white flag/lever. To reset this, move the white flag all the way to the left (I had to use something to push it). Put it back into the printer and voila - it fixes itself. Then, after the printer has been reset, you can use the original cartridge again, if you want. The flag part won't matter once the printer has been reset. I hope this is clear. I know it worked for me, and I had the exact same problem.

Jul 14, 2010 | Brother DCP-7030 Digital All-in-One Laser...

1 Answer

Toner Problem.


Is this a remanufactured/ compatible unit? I suspect that the toner reset lever on the cartridge has either not been installed or not properly set. return for another one

Apr 24, 2009 | Brother DCP-7030 Digital All-in-One Laser...

Not finding what you are looking for?
Brother DCP-8060 Laser Printer Logo

890 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...