Question about Samsung 80GB INTERNAL 3.5- IN SATA HDD 7200RPM 8MB 1- IN HEIGHT 3- YEAR WARR. BULK (SP0802C) Hard Drive

1 Answer

My computer displays the normal windows with its desktop icons but automatically shuts down. there's a dialog box that appears but i cant read the content because it disappears in a flash, what do you think is the problem?

Posted by on

  • julie25sh May 12, 2010

    Does it boot up in safe mode? (Keep hitting the F5 key repeatedly while it's booting).

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 193 Answers

When your desktop loads, click on start menu, run, and wright: cmd
then wright: shutdown -a (in the command promp)
and hitt enter.
the dialog should disappear, restart the pc and check if it comes again that u need to make the same prosses again plus, going to msconfig (righting it in run), and then to the bookmark saying start up and uncheck any suspisious programe, locate its files,delete them,apply and restart again.

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Make icons smaller


Assuming you're talking about your desktop icons, here's how that can be done:
    1.If you're using Windows Vista or higher, you just need to right click on the desktop and point to view and the select the size that you want.
    2.If you're using Windows XP, follow the instructions mentioned below:
    i.Right-click any empty space on the desktop. A context menu will appear. Select Properties.
    ii.Select the Appearance tab in the Display Properties dialog, then click the Advanced button.
    iii.In the Advanced Appearance dialog, select "Icon" from the Item drop-down menu. Select new size in the Size field to the right of the drop-down menu.

    GuruAid

Apr 14, 2014 | Computers & Internet

1 Answer

I want to reduce size of screen contents so that i can read the entire screen


Click start control panel display desktop you can select a different desktop from the drop down list or a browse button where you can select different pictures this may vary depending on your operating system also you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal , larger or custom settings
Always click APPLY after making any changes windows 7 Open Personalization by clicking the Start button, clicking Control Panel, clicking Appearance and Personalization, and then clicking Personalization. Click Window Color and Appearance. Under Window Color and Appearance, click the color you want, and then click OK. Note If you see the Appearance Settings dialog box instead of the Window Color and Appearance window, the theme might not be set to Windows Vista, the color scheme might not be set to Windows Aero, or the computer might not meet the minimum hardware requirements for running Windows Aero. For more information, see Troubleshoot problems with Windows Aero. Create Menu tab right click in the top of screen (toolbar) you will see a number of toolbar options select the menu bar This will add to your screen toolbar File Edit View Favorites Tools and Help select the View from the drop down list will be a Zoom with percentages % and text s largest to smallest and Full screen option Hope this helps.

Jan 08, 2013 | Computers & Internet

1 Answer

COMPUTER SCREEN TOO DARK.



click start control panel display desktop you can select a different desktop from the drop down list
or a browse button where you can select different pictures this may vary depending on your operating system
also you can change the settings for more or less pixels or from the drop down list pick the appropriate level of colour range or troubleshoot also select advanced then general dpi
normal size, larger size or custom settings
always click APPLY after making any changes


windows 7

Open Personalization by clicking the Start button, clicking Control Panel, clicking Appearance and Personalization, and then clicking Personalization.


Click Window Colour and Appearance.

Under Window Colour and Appearance, click the colour you want, and then click OK.


Note

If you see the Appearance Settings dialog box instead of the Window Colour and Appearance


window, the theme might not be set to Windows Vista, the colour scheme might not be set to Windows Aero, or the computer might not meet the minimum hardware requirements for running Windows Aero. For more information, see Troubleshoot problems with Windows Aero.


hope this helps

Jul 29, 2012 | Dell Computers & Internet

2 Answers

Text is too small and difficult for me to see


On the Start menu:
  • Select Control Panel

In Control Panel:
  • Be sure you are in Classic View (all Control Panel icons are showing).
  • If not, under Control Panel in the left pane, select Switch to Classic View.
  • Select Display.
In the Display Properties dialog box:
  • Select the Appearance tab.
  • Select a Windows and buttons style from the list.
  • Select a Color scheme from the list.
  • Select a Font size from the list.

For more customization:
Under Windows and buttons:
  • Select Windows Classic style.
Under Color scheme:
Select the color scheme you want from the expanded list of options
To change individual desktop elements such as title bars, icons, menus, and scrollbars:
  • Select the Advanced button.
In the Advanced Appearance dialog box:
To choose the screen element you want to change:
  • Select it from the Item list.
To choose available size, color and font styles:
  • Select from the attribute lists.
When you are finished with selections:
  • Select OK twice to close the dialog boxes.
To close Control Panel:
  • Select the Close button.
advanced.jpg

Control Panel: Display: Appearance tab: Advanced button

advappearance.jpg

Control Panel: Display: Appearance tab: Advanced Appearance dialog box

To open the Ease of Access Center, select:

  • Start.
  • Control Panel.
  • Ease of Access.
  • Ease of Access Center.

Under Explore all settings, select:
  • Make the computer easier to see.

Under See also, select:
Personalize appearance and sound effects
In Personalize appearance and sounds, select:
  • Display Settings.
  • Under Resolution:
  • Select a resolution between Low (screen elements appear bigger) and High (screen elements appear smaller).
  • Select OK.

resolution.jpg

Apr 19, 2011 | Computers & Internet

2 Answers

How to unlock computer


If Error Message Says the Computer is Locked by User
1

Press "Ctrl" + "Alt" + "Delete" on the keyboard to unlock the computer.
2

Type the username and password of the user who last logged on to this computer. Click the "OK" button when you are done.
3

Wait for the "Unlock Computer" dialog box to disappear. The computer has now been unlocked.
4

Press "Ctrl" + "Alt" + "Delete" on the keyboard again and log on normally by typing in the username and password.
If the Error Message Does Not Tell Who Locked the Computer
1

Attempt to shut down the locked computer through the server computer. You will have to use the Shutdown tool in the Microsoft Windows Resource Kit (see Resources for download link) to shut down the computer remotely.
2

Wait for the "System Shutdown" dialog box to display the locked computer. Although the dialog box appears, the computer will not actually restart.
3

Wait until the "Welcome to Windows" dialog box appears on the locked computer.
4

Press "Ctrl" + "Alt" + "Delete" on the keyboard before the screensaver becomes active and log on normally by providing your username and password.

If you think this solution helps you then your token of appreciation in the form of Rating and a testimonial will be esteemed.
Thank you and Keep Visiting FixYa!

Apr 12, 2011 | Toshiba Satellite Pro L300 Notebook

1 Answer

I have sony vaio S. but the wirelees is not working no wireless host shown. how can i fix it?


Selecting the wireless function Follow the steps below to select the wireless function to be activated when you set the WIRELESS switch on your computer to on. Double-click (wireless switch icon) on the Notification area at the bottom right of the desktop.The Wireless Device Switch dialog box appears. Hints The appearance of the wireless switch icon changes depending on the selected wireless function. Point to the wireless switch icon to display the selected wireless function. Alternatively, you can right-click the wireless switch icon and select "show Wireless Device Switch settings" to display the Wireless Device Switch dialog box. Select the desired wireless function from "Wireless LAN" or "Bluetooth Device". Notes 5 GHz Wireless LAN is available on certain models only. You must select at least one wireless function to perform wireless communications. The 2.4 GHz and 5 GHz Wireless LAN functions employ different frequency bandwidths, thus are not compatible with each other. Checking the check box for both "Enable 2.4 GHz Wireless LAN" and "Enable Bluetooth Device" may cause poor communication performance or a connection loss due to electromagnetic interference. Click OK. The message "Setting up the wireless devices. Process may take several minutes. Please wait." appears first, then the Wireless Device Switch dialog box is closed, and finally the dialog box that describes what to do with the icon on the Notification area appears. Note While the message "Setting up the Wireless Devices. Process may take several minutes. Please wait." is displayed, do not: place your computer into power saving mode. turn off Windows or log off from the current user. turn on and off the WIRELESS switch. Confirm the settings and click OK. The dialog box about the icon on the Notification area closes. Hint If you check the "Don't show this dialog in the future" check box, the dialog box will not appear next time you close the Wireless Device Switch dialog. To analyze the network condition You can analyze the network condition if you select either or both of the wireless functions under "Wireless LAN" in step 2 above. Click the "Diagnose" button to start Windows Network Diagnostics. When the network analysis is complete, the result is displayed. If any problems are found, follow the on-screen instructions. Hint Windows Network Diagnostics is the function to identify problems the network has and present solutions to them.

Mar 01, 2011 | Sony Computers & Internet

1 Answer

How to turn on a dhcp on a rca model dcm425 cable modem?


Hi there,
Enabling DHCP at the Client To enable the Windows NT DHCP client, you must log on as administrator at the Windows NT client.

Normally, you enable DHCP as part of the installation procedure for Microsoft TCP/IP, however, you can use this procedure if you have manually configured TCP/IP:
  1. Run Control Panel and choose Network.

    The Network Settings dialog box appears.
  2. Under Installed Network Software, select TCP/IP Protocol and then choose configure.

    The TCP/IP configuration dialog box appears.
  3. Select Enable Automatic DHCP Configuration.

    A Microsoft (MS) TCP/IP message appears, indicating that the DHCP Protocol attempts to configure the server automatically during system initialization.
  4. Choose Yes.

    A MS TCP/IP Configuration dialog box appears, displaying current TCP/IP configuration parameters. The IP Address and Subnet Mask boxes are not available (grayed out) and the manually configured values are no longer displayed.
  5. Choose OK to return to the Network Settings dialog box.
  6. Choose OK again.
  7. Shut down and restart the computer.
To enable DHCP on a Windows for Workgroups client if TCP/IP is not installed yet:
  1. Use Network Setup to install the MS TCP/IP-32 3.11 protocol.
  2. In the MS TCP/IP Configuration dialog box, select the Enable Automatic DHCP Configuration check box, and choose Continue.
  3. Restart the computer to initialize TCP/IP using DHCP.
To enable DHCP on a Windows for Workgroups client if TCP/IP is installed:
  1. To access the Network Drivers dialog box, run Network Setup.
  2. Select Microsoft TCP/IP-32 3.11, and then choose Setup.
  3. In the MS TCP/IP Configuration dialog box, select the Enable Automatic DHCP Configuration check box, and choose continue.

    A message box appears indicating that the configuration of DHCP overrides any values established locally.
  4. Choose Yes.
  5. To initialize TCP/IP using DHCP information, restart the computer.

Dec 19, 2010 | RCA Computers & Internet

1 Answer

I tried to reinstall my windows,and all worked fine until a window appeared saying "to improve the appearance of visual elements,windows will automatically adjust your screen resolution" and it...


As you turn on yur PC hold down the F8 key. The advance Options Menu will come up. Highlight "Safe Mode" and press Enter. You PC will load with a minimal set of drivers to allow you correct problems such as yours.

Rigt click anywhere on the blank desktop screen and then click on Properties. A display properties dialog box will open. Next click on Settings and set your screen resolution to 800 X 600. Then click on Apply and OK.

Restart your computer in the normal manner. Your system should now be working. If your nonitor Icons are too large, go back into display properties and increase your screen resolution settings.

.
If you believe that this information was helpful to you please return to the FixYa website and rate this response to your question.
Regards,
Yavacotech

Dec 09, 2010 | Computers & Internet

1 Answer

Printer is not scan but some problem she has. Error in scannor Turn off scannor and follow instructions ni manual. Scannor drive will closed. Code : 61,213,0 I want to new setup Canon PIXMA MP160...


  1. Select 'Program' (for Windows 2000/Me/98), or 'All Programs' (for Windows XP) from the Start menu.

  2. Select the name of the printer model to remove and select 'Uninstall.'

    05sj00014_01_en.jpg

  3. When the MP Drivers Uninstaller window is displayed, click 'Perform.'

    05sj00014_02_en.jpg

  4. When the confirmation window is displayed, click 'Yes.'

  5. When the Uninstallation Complete window is displayed, click 'Complete.'

    05sj00014_03_en.jpg

  6. Reinstall the drivers.

Reinstall the Drivers
Note:
  • The MP drivers can be installed using Easy Install or Custom Install.
    Easy Install automatically installs the software which is in the CD-ROM.
    This method is recommended for first-time users.
    Custom Install allows you to select the software programs from MP Drivers, Application Software, and On-screen Manual.
  • Login as a user with Administrator privileges to install on WindowsXP/2000.
  • Close any antivirus software that may be running prior to installing the drivers.
  1. Turn off the printer and disconnect the cable connecting the computer and the printer.

  2. Insert CD-ROM in the computer. (The CD-ROM will start automatically and the following window will be displayed on the screen.)
    1. If setup does not start automatically, click 'Start' and then 'Run'.
    2. At the Run window, type x:\msetup4.exe (where x is your computer's CD drive) in Open box and then click 'OK'.

  3. At the main installation window, click 'Easy Install' or 'Custom Install'.

    05sj00016_01_en.jpg

    When selecting Easy Install:

    (A) Click 'Easy Install'.

    (B) Click 'Install' in the following window.

    05sj00016_02_en.jpg

    * Display varies according to the printer model.


    When selecting Custom Install:

    (A) Click 'Custom Install'.

    (B) When the following window is displayed, click 'MP Drivers' and the application software to be installed, and then click 'Next'.

    05sj00016_03_en.jpg

    * Display varies according to the printer model.

  4. When the License Agreement window is displayed, read the content carefully and click 'Yes'.

  5. The installation will start.
    Messages may be displayed during the installation of the application software.
    Follow the instructions on the window and continue the installation.

  6. When the Printer Connection window appears, connect the printer to the computer and power on the printer.

    Note: If the installation cannot proceed even after 2 minutes, stop the installation by following the procedures below and start from the beginning again.

    1) Click 'Cancel' at the Printer Connection window then click 'Start Over' at the Installation Failure window.

    2) At the window to install the driver / applications appears, click 'Back' then click 'Exit'.

    3) Restart the computer.

    4) Install the printer driver again.

  7. For Windows XP, at the Welcome to the Found New Hardware Wizard dialog box, confirm Install the software automatically (Recommended) is selected, then click 'Next'.

    Note: The Welcome to the Found New Hardware Wizard dialog box may be behind the Printer Connection window.
    In this case, click 'Found New Hardware Wizard' button on the task bar to display the window.

  8. After the files are copied automatically and the dialog box Completing Found New Hardware Wizard window appears, click 'Finish'.

  9. If the Welcome to the Found New Hardware Wizard dialog box appears again, click 'Finish' again.

  10. At the Print Head Alignment window, click 'Execute'.

    Note:
    * The Execute button may not appear for all models. In that case, skip to step 13.
    * The Print Head Alignment can also be done after the installation of the printer driver.


  11. When the Start Print Head Alignment window appears, load one sheet of A4 or letter size plain paper in the sheet feeder and click 'Print Head Alignment'.

  12. At the Do not start another operation until current one has finished dialog box, click 'OK'.

  13. When the pattern is printed, click 'Next' at the Print Head Alignment dialog box.

  14. At the Installation Results dialog box, check the content then click 'Next'.

  15. At the Installation completed successfully dialog box, click 'Exit'.

    Note: When the Restart button appears, confirm that Restart the system now (recommended) is checked then click 'Restart'.

Dec 04, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

So I hooked this moniter up to my hp and all I get is two blinking lights


One monitor serves as the primary monitor, and this monitor displays the Logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. You can select different screen resolutions and different color quality settings for each monitor. Multiple monitors can be connected to individual video adapters or to a single video adapter that supports multiple outputs. To configure the arrangement of multiple monitors:
  1. Click Start, and then click Control Panel.
  2. Click Appearance and Themes, and then click Display.
  3. On the Settings tab, click Identify to display a large number on each of your monitors. This shows which monitor corresponds with each icon.
  4. Click the monitor icons and drag them to positions that represent how you want to move items from one monitor to another, and then click OK or Apply to view changes.
NOTE: The icon positions determine how you move items from one monitor to another. For example, if you are using two monitors and you want to move items from one monitor to the other by dragging left and right, place the icons side by side. To move items between monitors by dragging up and down, place the icons one above the other. The icon positions do not have to correspond to the physical positions of the monitors. You can place the icons one above the other even though your monitors are side by side.
Change Primary Monitor
  1. On the Settings tab of the Display Properties dialog box, click the monitor icon that represents the monitor you want to designate as the primary monitor.
  2. Click to select the Use this device as the primary monitor check box. Note that this check box is unavailable when you select the monitor icon that is currently set as your primary monitor.
View Same Desktop in Multiple Monitors
  1. On the Settings tab of the Display Properties dialog box, click the monitor icon that represents the monitor you want to use in addition to your primary monitor.
  2. Click to select the Extend my Windows desktop onto this monitor check box. After you enable this feature, you can drag items across your screen onto alternate monitors. Or, you can resize a window to stretch it across more than one monitor.
Move Items Between Monitors
  1. On the Settings tab of the Display Properties dialog box, click Identify to display a large number on each of your monitors. This shows which monitor corresponds with each icon.
  2. Click the monitor icons and drag them to positions that represent how you want to move items from one monitor to another, and then click OK or Apply.
  3. Drag an item on your desktop across your screen until it appears on the alternate monitor. Or, you can resize a window to stretch it across more than one monitor.
Using DualviewOn many portable computers and some desktop computers (those with two video ports on one video card), you can expand your display to a second monitor by using Dualview. Dualview is very similar to the multiple monitor feature, with the exception that you cannot select the primary display. On a portable computer, the primary monitor is always the LCD display screen. On a desktop computer, it is the monitor that is attached to the first video out port. Once you attach the second monitor and turn on your computer, use the Display tool in Control Panel to configure your settings, just as you do with multiple monitors. You can use Dualview with docked or undocked portable computers.

Mar 08, 2010 | HP A4331D 20" CRT Monitor

Not finding what you are looking for?
Samsung 80GB INTERNAL 3.5- IN SATA HDD 7200RPM 8MB 1- IN HEIGHT 3- YEAR WARR. BULK (SP0802C) Hard Drive Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...