Question about Computers & Internet

1 Answer

Play station 3. turn it on it will go right back off. and has a red flashing on.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,561 Answers

Hello,

This could probably be over heating on your ps3 player station, i suggest you leave the ps playstaion for sometime to cool because the yhe ps3 play station is over heated that is when it it flashes the red light and wont turn on.

Leave the playstation for some time to cool before you power it up again. it will power up when it is very cool.

Take care

Posted on May 12, 2010

  • okelley1012 May 12, 2010

    we let it cool for two days... and it does the same thing

  • Sulaimon Jimoh Olayemi May 12, 2010

    Hello,

    If the above did not still solve the problem, you can also follow the below procedure.

    If the blinking red light on your PS3 is happening
    before you get onto the loading screen, then do the following:
    1.
    Turn the console off by holding the power button on the front of the
    console down for 10 seconds.
    2. Once the console is on standby,
    then turn it off from the back.
    3. Then press the power button
    and keep your finger pressed on it, until you hear 3 beeps.
    4.
    This should hard-reset your PS3, so it should restart and then load up
    with no problems.

    If that didn't solve the problem, try this,

    Take out
    the PS3’s hard drive at the side of the console.
    Boot up your ps3
    – if it now starts up again, great! This could either mean it is fixed,
    or you have found out that the hard drive needs replacing. Put the hard
    drive back into your PS3 and load it up again. If it starts up, and you
    can play games, If it
    hasn’t worked, you have a hard drive problem.

    Take care




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Play station controller....is the 4 red light suppose to keep flashing


It's flashing for one of two reasons. It is either about to die because the batteries need to be charged. Or it is hooked up and charging. Those are the only two reasons I can think of for them to flash. Possibly not connecting, but you would have probably said that if it was the case.

Mar 13, 2016 | Sony Play Station 3 System Backpack For...

Tip

PS3 Has no Video - Simple fix!


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

on May 13, 2010 | Video Game Consoles & Games

Tip

How to change or reset PS3 Video Display Mode


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

on Mar 12, 2010 | Video Game Consoles & Games

2 Answers

Flashing red light on play station 3


Try turning off the PS3 at the back and then on again after about 15 - 20 seconds. When you turn it on, press the eject button.

Jul 22, 2014 | Sony Play Station 3 System Backpack For...

1 Answer

My play station 3 comes on then goes right back off and flashes red? I thought i might had a virus?


Ylod you need a reflow of the CPU/GPU there are many guides on you tube to show you how to do this or you can send it to a pro like me to fix for you.

Jun 11, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Tv and ps3 plugged in and on. av channel shows an empty screen


Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.

Jun 10, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Ps3 wont display on the tv!!


Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.

Jun 10, 2010 | Sony PlayStation 3 40GB System

1 Answer

Ps3 broken


When you attach your Play Station 3 to an HD TV through an HDMI port, the Play Station 3 will ask you if you wish to switch to HD Mode.

However, if you decide to move it to another TV that is not HD compatible, you will get no picture because the Play Station 3 is “stuck” in HD (HDMI) mode.

Follow these steps to resolve your problem:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button until the screen "flickers" and then immediately release. This should reset the video settings.

4. Wait a few seconds, and the Play Station 3 (PS3) logo should appear.

If this does not resolve the problem, follow these steps:

1. Turn off the PS3 so it only shows a red light. You can hold the power button on the front until it goes into standby. To be sure, flick the power switch on the back of the Play Station 3 off and then back on.

2. Make sure your Play Station 3 is connected to your regular TV (not HDTV) with the standard video cables.

3. Press and hold the power button on the front until the Play Station 3 beeps and then turns off again. This should reset the video for you and you can turn it back on after this.



That’s it! You can play your Play Station 3 again!

Nov 06, 2009 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...