Question about Proxim Orinoco Ap-700 802.11a, 802.11g/b (8675-us2) Wireless Access Point

2 Answers

How to reset orinoco ap 700 - Proxim Orinoco Ap-700 802.11a, 802.11g/b (8675-us2) Wireless Access Point

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,138 Answers

See the AP700 Hardware Overview below.... while the router is on.. press and hold the reset button (hole) for about 10 sec, using a paperclip.. the simplest way to restore your default setting..how to reset orinoco ap 700 - 39f23e8.jpg

Posted on May 16, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

There is hardware reset button on the back of the AP. You need to press it for 10 seconds. However it is possible that this is disabled in the AP configuration, but there are other methods how to reset the AP - see the manual at http://www.intelek.cz/db/repository.nsf/v/E913B7018BED9E7BC125736600675368/$file/Manual_Orinoco_Access_Point_AP-700.pdf

Posted on May 12, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: Reset AP-700 failed

Simple solution, firstly do not press the reset button to long as it will erase all software, or you will have to do this the hard way. google the software called ScanTool run that from either ethernet or wireless, this tool shows you the AP-700's ip, mac, and name (some techs run these AP's coadjacent so it shows the name as well). You can change the ip of the AP-700 from here most of the time with the proper pass, then you should be able to connect to it regardless. if this dont help ... Proxim/Support/AP700 you will find more of an in depth approach of these things there.

Posted on Dec 01, 2008

  • 394 Answers

SOURCE: what is the default IP

Hi, I am Steve, lets get you some help
the IP address you need is 169.254.128.132

Posted on Jan 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Default ip address on orinoco ap 700


you must update the driver fro the adapter wireless and try again. Download from the supplier company.

God bless you

Nov 07, 2013 | Lucent ORiNOCO Gold Wireless Adapter

1 Answer

Looking for 802.11g pc cards that will work with Orinoco AP-1000


Hi there,

I'm not sure why you would want to use a G Card when Wireless N is much better. However, as per your request, I have provided you with a list of Wireless G Cards.
http://ncix.com/products/index.php?minorcatid=1004&subminorcatid=344
If this solution doesn't resolve your problem, please return to this page and submit a response. I will be happy to assist you further. :)

Feb 24, 2011 | Lucent ORiNOCO AP-1000

1 Answer

Hello have 2 Proxim ap orinoco 4000MR-LR Outdoor and i forgot all password and disable hardware reset how can I reset device to factory default


In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.
If you need more help post back! Thumbs and testimonial are welcome!

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Jan 31, 2011 | Proxim ORiNOCO AP-4000 (8670MUS)...

2 Answers

Default Password for Proxim AP 4000 MRLR


The default password is should be "public" if it was factory defaulted.

Dec 04, 2010 | Proxim ORiNOCO AP-4000MR (8670-MR-LR)...

1 Answer

Proxim ap 2000 11b/g cardbus driver free?


i dont now how to get my uther computer to use wifi on the proxim orinoco ap-2000 11 b/g hit can u help me

Oct 13, 2010 | Proxim ORiNOCO AP-2000 11b/g Kit 802.11g/b...

1 Answer

ORiNOCO® 802.11a/b/g/n USB adapter does not roam


Can you turn down the transmit power, or lock a certain data rate, on the client card? Doing either of those things should initiate a roam more quickly. Do you have any control of the infrastructure configuration? You can lock the datarates on the AP's to achieve the same effet, though it may have adverse effects on other client devices.

Nov 24, 2009 | Computers & Internet

1 Answer

Reset AP-700 failed


Simple solution, firstly do not press the reset button to long as it will erase all software, or you will have to do this the hard way. google the software called ScanTool run that from either ethernet or wireless, this tool shows you the AP-700's ip, mac, and name (some techs run these AP's coadjacent so it shows the name as well). You can change the ip of the AP-700 from here most of the time with the proper pass, then you should be able to connect to it regardless. if this dont help ... Proxim/Support/AP700 you will find more of an in depth approach of these things there.

Oct 30, 2008 | Proxim Orinoco Ap-700 802.11a, 802.11g/b...

2 Answers

Ap 700 reboot suddenly


Device setting themselves on their own to default?  Sometimes power surges, thunderstorms causes all of these. Reconfigure devices and try to buy surge protector.

Oct 18, 2007 | Proxim Orinoco Ap-700 802.11a, 802.11g/b...

Not finding what you are looking for?
Proxim Orinoco Ap-700 802.11a, 802.11g/b (8675-us2) Wireless Access Point Logo

Related Topics:

3,662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proxim Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kj henriksen
kj henriksen

Level 2 Expert

176 Answers

Are you a Proxim Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...