Question about Standard (CRT) Televisions

1 Answer

Tv has sound but picture is black

My tv is a sanyo 20 inch flat screen tv model number clt2054 picture goes black but sound still works

Posted by on

  • Anonymous Nov 21, 2008

    I have a similar problem, the only difference being my screen turns white instead of black.  The sound still works.  The first time it happened, I turned the tv off and back on, and the picture was back.  However it kept happening, and now turning it off and on does nothing.

  • Anonymous Apr 25, 2009

    My tv is on with sound but the screen is black. I think it has something to do with the remote. i can still go to settings and the cable info will show on the screen but no picture

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 129 Answers

Good day.
The crt circuit of the unit might be loose or the the parts inside the board is loose. Have it hecked by a technician first. Minor parts inside might caused the problem.

Response is highly appreciated.


chris

Posted on Mar 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please tell Sanyo flat screen TV model #dp42d23


If it is less then 1 year old Sanyo may fix it free . other wise get a quote as it may cost the price of a new one.

Oct 29, 2014 | Standard (CRT) Televisions

1 Answer

Tik tik sund from philips tv


when i turn on my philips 20 in flat tv i have no picture, just black screen with a tik tik sound

May 11, 2010 | Philips Magnavox 27MS343S 27" TV

2 Answers

Screen won't display


I found your site confusing. If you had read my post, you would have noticed that my problem referred to a 15" flat screen 'CELLO' .TV/DVD combo. I had sound but no picture. When switched on, the screen lit up and the word CELLO appeared then the sreen went black

Nov 25, 2008 | Emerson EWF2004 20" TV

1 Answer

Flickering multi-colored line in the middle of the screen.


You have a failure in the vertical deflection circuit. This could be either a bad vertical chip, the power supply that runs the chip or a bad capacitor in that circuit. This is usually a repair best left to a professional. There is a small possibility that it could be bad solder connections. If genlty tapping the unit temporarily solves the issue you can try and resolder the pins on the vertical chip LA7841 is the part number. There is also a resistor 1 ohm 1 watt. If that resistor is open you can assume the IC is bad

Oct 26, 2008 | Sanyo DS27800 27" TV

1 Answer

20 inch wega @1999 Picture comes in and out


Try to finde lose connection/ cold solder joint at board attached at end of picture tube. It seems heater/ filament voltage not being supplied to picture tube after a while and picture goes to black.

Jul 22, 2008 | Sony FD Trinitron WEGA KV-20FS120 20" TV

1 Answer

No picture on flat screen new, with cable


IF THIS IS A LCD---TURN ON, AS NORMAL AND HAVE A SIGNAL INPUT,,CABLE ,SATELLITE CONNECTED TO THE ANTENNA INPUT .MAKE SURE YOU HEAR SOUND.. HOLD A LIGHT (THE BRIGHTER THE BETTER) IN FRONT OF THE THE SCREEN ('BOUT 3 INCHES)--IF YOU SEE A DIM PICTURE---BAD SCREEN AND THATS BIG BUCKS---IF STILL NO PICTURE--CIRCUIT BOARDS AND USUALLY THATS BIG BUCKS!! GOOD LUCK

Mar 16, 2008 | Sanyo DS27930 27" TV

1 Answer

Sanyo TV stretches outwards and shakes


If the picture is closing (top to bottom) and goes back to normal when you hit it you probably have a bad solder connection on IC501 (location number) the vertical deflection IC on a metal heat sink. If you mean outwards as in side to side as it looks in the picture, I don't know specifically where to solder but get a magnifying glass and look for suspected bad solder connections. Look for the word width if it is there. It is good that you a confident in soldering.

Dec 27, 2007 | Sanyo DS27910 27" TV

1 Answer

Sanyo DS24425 24" TV has great sound and no picture(black screen)


if tv have black screen,increse screen control to see vert ic is defective,and if screen is white with lots of line acrose ,you can find open resister,on pic tube board,or in main board near transformer.

May 20, 2007 | Sanyo DS24425 24" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...