Question about Brother CS-80

1 Answer

Sewing slowed and then stopped

Sewing fine, started makinga noise and then slowed and then stopped. Wheel will not turn. Stitches look fine, did not drag or skip.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 240 Answers

Hello,
If you are unable to move the wheel then something is locking up the mechanism.
Please try removing the bobbin and the bobbin case and try turning the wheel.
If the unit does not jam, try reinserting the bobbin and the bobbin case. You might need to consider replacing the bobbin case if the unit jams again.
If it still jams without the bobbin case in, then the mechanism might be broken and you should bring the unit to be looked at by a brother tech. Brother techs will look at the machine and diagnose the issue free of charge and will only charge you if they have to do any out of warranty repairs.
Thanks,
Pat

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My singer curvey 8763 is making clunking noise when start sewing and then stop working


possibly out of time with the bobbin . take in to a shop for checkup

Feb 05, 2015 | Singer Sewing Machines

1 Answer

How do I stop my Juki DDL-8700 machine from skipping stitches?


set up on quilting table? wheres the oil pan?? if your machine sews fine straight and skips on curves i think you are lifting the presser ft as you make the turn. theres nothing wrong with the machine. you could always change the needle which is always the first thing when you encounter a sewing problem.

Oct 08, 2014 | Juki DDL-8700 Industrial Straight Stitch...

1 Answer

Sews about 5 stitches then stops and beeps. stitches look fine, just will not keep sewing


count the beeps and refer to the owners manaul as for troublshooting tips

Dec 03, 2013 | Singer 8780 Sewing Machine

1 Answer

Brother sewing machine noise


Sound like the whole unit needs a good cleaning.
My rule is "if it moves give it a lube", be careful not to get oil on electric boards or in the motor. What is the make and model of your machine. I will try to help you more.

Feb 26, 2013 | Sewing Machines

1 Answer

My Janome magnolia is 3 years old. Last week I was sewing and everything jammed, needle went to side and broke. It was trying to run but couldn't. I took bobbin out and cleaned it, oiled everything, where...


Try the process of elimination. Take out the needle, take off the needle plate, take out the bobbin case. Run the machine. Does if run full speed? You might have to let the machine run for about 5 minutes. If it runs slow or you hear it slow down, you might have a bad connecting link between the needle bar and the main shaft counter weight. They seize up sometimes. (Shop Repair).

May 03, 2011 | Sewing Machines

1 Answer

How do I turn corners with the overlock foot for a Janome 2049?


Sew to the end of the fabric, slowing right down to within a stitch or two of the end, manually turn wheel to complete last two stitches, stop, raise needle, raise presser foot, turn fabric so the back edge of the fabric is just under the needle, drop needle, drop presser foot and resume.

Mar 13, 2010 | Janome 2049LX Mechanical Sewing Machine

2 Answers

Skipping stitches


Rule of thumb: Fast needle, slow hands. This should help. GiGi

Feb 19, 2009 | Janome 1600P-DB Mechanical Sewing Machine

1 Answer

I have s Bernina deco 650 embrodiery machine and the stitches won't catch. I had this machine serviced before I moved from SD to an eastern state. It was sewing fine and just started making a noise like it...


Your timing is out in the bobbin area this will have to be reset, maybe the last time that you used it you had a cotton jam, and it was pulled out of alignment.

Aug 07, 2008 | Bernina Bernette Deco 600

Not finding what you are looking for?
Brother CS-80 Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Irene Tulloch

Level 2 Expert

460 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...