Question about Televison & Video

1 Answer

I have already addressed my problem in detail and the response was lame to say the least: Your TV is not compatable with the the newer DVD Players. If that were the case then the Sharp DVD player I have that was only hooked up for two months back in 2003 and worked but because It was not progressive scan I replaced it with the JVC. That Older 2003 DVD player is also not recognized by the TV I just tried it and the same results as the original Post as follows. I have a Mitsubishi HDMI Projection TV hooked up with a Seven Year Old JVC DVD player that plays all DVD's other then those released within the last several months. Netflix/Redhat tells me the DVD Player does not DEcode the newer disks. I purchased two brand new dvd players one a Magnavox, and a Sony Blue Ray. I hooked up Component Cables and Optical Audio. I then changed the Input on the TV to Comp. 1 and the TV does not Pick up on the DVD Player at all. I tried RCA,S-Video and still nothing. I returned both Players. Can anyone advise what the problem is. The real kicker is the TV recognizes the Older DVD play and will play all my older DVD's and it will not even recognize any other DVD Player.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 12,061 Answers

"the TV recognizes the Older DVD play and will play all my older DVD's and it will not even recognize any other DVD Player" (sic) Just what format and what "Connection" do you use when connecting this"Old" one to the TV?
I mean there is nothing to "Pick Up" It is hard to believe that when connecting up, from say COMPONENT, YELLOW, Stereo Audio, Red & White, and selecting, the appropriate external channel you are unable to get either audio, or video? That is just too weired.
The Component of HDMI, inputs too, are very strange, to accept one input from a unit, and not from another, it doesn't seem possible, I wonder if you haven't been doing, or not doing something very basic, on both, and that;s the reason you did not succeed? It is very easy to get tangled up when setting these devices up, especially when unfamiliar, for the first time. Did. were, you, are you, able to test whatever you are wishing to hook up, to some other TV to actually see if the units are putting out a correct signal. It is best try COMPOSITE Video first, with the Red & White Audio, leads used too. Putting the TV on EXTERNAL Channel, if there is a signal, it MUST display, it cannot, differentiate between signals, it is just a 1 V p-p, AC Signal, that is amplified and fed on. I think you may need to sit down with your manuals and figure it out step by step, as there really is no way this should happen, especially on a TV set. That's effectively used as a Monitor, by the DVD units, and there is NO communication between them with say Composite, or Component, so.. It has to be a setting, on the TV or DVD or both.. or some other input setting not correct. I think you should try again, and use the manuals.

Posted on May 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 gmc panasonic dvd plays older dvd but not newer ones


It may likely not be compatable with the newer ones--possible also that optical pickup may be dirty or beginning to fail.

Apr 30, 2012 | Panasonic Televison & Video

1 Answer

Both of my dvd players fail to play ANY and ALL movies...can I get my money back from the manufacturer because I wasted it on these worthless dvd players?


Factors that captures user experiences. First the manufacturer invents that products capable of attaining resourcefulness among mentionable as digital media players, recorders. Device manufacturer guarantees that functionality is attained especially that media players are provided compatible DVD, R, RW, and CD that makes user impressions. Manufacturer provides means to resolving conditions where defects recapture user impression from as replacements or reconfigurations to attain requisite functionalities. Device is provided with guarantees from the manufacturer to perform as prescribed details of which are retrievable from owner's user guides. In situations that the device least attains requisite functionality becomes resolvable. First ascertaining from the devices restore materials, user guide makes available support expertise to recapture impression feature functions. Device support experts provide the means the recapturing the user impressions either as resorting with manufacturer as default malfunction also recapturing replacement or reconfiguring to attain functionality. At acquisition the device is made available to customer with material details about attaining feature functionalities as new owner. Among mentionable examples are user guides that provide readable recognition of what is expected from device to capture an impression. Complimentary with user guides are support expertise resolvable with conditions that causes restoration, reconfiguration as examples. New owners of device are valued entity to the retailer that trades products also from the manufacturer that derives productivity as inventor. New user of device is provided with contact details of the device either the retailer from where several similar products acquirable also from where referencing is attainable. Device owner is provided with manufacturers details also as complements. Device at acquisition bellows to the customer however has means resolving conditions an example already displayed. As means to immediate response, refer with devices user guide to ascertain methods to capturing an impression as new owner also attaining methods of resolving conditions.

Mar 11, 2011 | Cyberhome CH-DVD 300 DVD Player

1 Answer

It does not play the newer blu rays


Hello, A Blu-ray disc cannot be read on a regular DVD player unless it specifically says it can. The reason is the DVD player does not have a BLUE Laser assembly installed in it. Some newer blu-rays are backwards compatible and can read DVD's, but not the other way around! You will have to purchase a BLU-Ray disc player to see these newer discs.
Good Luck! Rich Lilja

Nov 22, 2010 | Televison & Video

2 Answers

Does cyberhome ch-dvd 300 dvd player play burned mp4 movies?


Hello,

the answer is "No". Your player cannot play MP4 DVD discs.

Take care.

Jun 18, 2010 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Wont play newer dvds


hello,
the problem might be that the dvd doesn't play newer region, or the disc is not compatible with the dvd player.

Jan 07, 2010 | Samsung DVD-R135

3 Answers

Cannot play DVD's I burn at home on my PC.


I think I got your solution hurmanav8.  This model BR player will not play .avi files or many others.  You need to first convert to mpeg-2. Best program I have found for this is ConvertXtoDVD.  

Jan 08, 2009 | Sony BDP-S350 Blu-Ray Player

1 Answer

Please help


Have you try: NTSC on PAL TV On • NTSC discs will play correctly on PAL-only TVs.
Off Use if your TV is already NTSC-compatible.

Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 124 for related information.

Sep 14, 2008 | Televison & Video

1 Answer

Sony DRU 190A CD/DVD drive compatibility to XP SP2?


Upgraded to newer BIOS version on the MB

Aug 23, 2008 | Computers & Internet

1 Answer

Dvd/vcr without cable hook-up


If ** cable TV hookups exists, then the only inputs you can use are the line-in along with audio left/right. You've probably got a slew of output connections. Your unit does **t contain a tuner (which would allow you to use a cable input). You need to have a cable box or other device (vcr/tv) that has outputs compatible with the input of your dvd/vcr. A lot of dvd/vcrs are that way. It actually saves you some $$ since most cable boxes (especially HDTV compatible) already have the required outputs on them.

Mar 09, 2008 | Memorex MVD4543A

1 Answer

Recorded a DVD on computer but will not play on DVD player


dvd players play only certain kinds of discs and formats. Older ones played -R's, most newer ones play everything. You have to look in manual, or on box before you buy player. If it won't play -R,+R, -RW,and +RW's I pass it by. Find out if your player is limited to certain discs. Some will play VCD and some will not. Some will play DIVX and some will not etc. Stick to the discs and formats your particular player is compatible with.

Nov 29, 2007 | iLO DVD Recorder DVDR05

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...