Question about Baby Lock Esante

Open Question

Touch screen is out of calibration.

Hi. The touch screen on my Baby lock Esant'e model ESe, has gotten out of calibration. You have to touch way above the picture to get it to do what you want. How can I reacalibrate it? Do you know?
To make matters worse when I was trying to figure out how to fix it I touched the English button and now It is in French. I can't get it back to English. It is like both touch points of the buttons at the top of the screen are not even on the screen front. I have tried and tried but can not find the place where the English button is. It always comes up in French or Itallian. I would be ok with having to push above the picture if I could just get it back in English. I have tried to push as high on the screen as I can but it always comes back in French.
Can any one help me?????

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1894 Answers

SOURCE: My touch screen

your model number what company?

Posted on Dec 31, 2007

  • 3 Answers

SOURCE: My touch screen

Yes, I have a solution for this problem. Your screen needs to be recalibrated and you can do it yourself. Don't you wish they would just tell you this stuff instead of charging you an arm and a leg? Here's what to do: Before turning on the machine, press the start/stop button, the reverse button, and the needle position button all at once with one hand (one finger on each button). Hold them down and turn on the machine. What will come up is a recalibration screen. You will see the numbers 1-5 with a little plus sign beside them. Find a small blunt object (I used the tip of a mechanical pencil with the lead in instead of out) and while holding the start/stop button, touch the plus sign beside 1-5 in numerical order. Then, turn the machine off and on again in the normal way. This should recalibrate the screen. Pass it along, people! This is something no one should have to pay for!

Posted on Mar 15, 2008

  • 2 Answers

SOURCE: touch screen very light

I selected the basic operation, adjustment, then brightness of lcd.

Posted on Nov 16, 2008

  • 1 Answer

SOURCE: touch screen cannot be calibrated

We already fixed the problem, but just the same, our own premium plan is going to cost you ( an eye for an eye)

Thanks

Posted on Jun 22, 2009

  • 2 Answers

SOURCE: won't work at all-esante ese baby lock

Check that the button used to snip your thread at the end of your seam is not stuck. Mine will sometimes stick and if I just touch it again it will again activate and the red start/stop button will work again.

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant remember how to recalibrate my baby lock esante ESe.I found the answer before but didn't write it down.Now it is out of calibration again and I can not find how to do it. Please someone help. I


Turn off machine. Hold in the 3 buttons above the needle. Turn machine on. Voila in screen calibration mode. Using touchpen carefully touch numbers 1-5 in order. repeat until you hear beeps. turn off machine. restart and your good to go.

Oct 01, 2014 | Sewing Machines

1 Answer

Letter characters won't change


You need to re-calibrate the touch screen. It is in the settings menu to reset touch screen. Done.
Cheers,
Embroidery Services
San Diego, CA

Sep 24, 2014 | Baby Lock Esante

1 Answer

LCD screen not working


I am writing in the belief this is an old ESi or ESE machine. Chrysler K cars have disappeared. My old Compaq died. Your machine LCD is on its last legs. The old machine displays had 3 layers: the touch screen; the LCD and the backlight. Most are unavailable as replacements, and if they are, prohibitively expensive. Time to find another machine.

Nov 29, 2013 | Baby Lock Sewing Machines

2 Answers

Touch screen


the machine should be checked to see if there is something wrong with the motherboard.

Sep 03, 2013 | Baby Lock Esante

3 Answers

Janome MC 9000 off touch screen calibration


Thanks guys

I remembered the fix!!

On the Janome MC 9000

To calibrate the touch screen

1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.

Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Thanks
CYA

Nov 16, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Touch screen cannot be calibrated


We already fixed the problem, but just the same, our own premium plan is going to cost you ( an eye for an eye)

Thanks

Jun 21, 2009 | Husqvarna Designer I

1 Answer

Won't work at all-esante ese baby lock


Check that the button used to snip your thread at the end of your seam is not stuck. Mine will sometimes stick and if I just touch it again it will again activate and the red start/stop button will work again.

Apr 08, 2009 | Baby Lock Esante

5 Answers

My touch screen doesn't always work. Sometimes I have to touch all around the square and even then, it won't come on. At times, it stops working when I want to change patterns. It seems to work most of the...


Yes, I have a solution for this problem. Your screen needs to be recalibrated and you can do it yourself. Don't you wish they would just tell you this stuff instead of charging you an arm and a leg? Here's what to do: Before turning on the machine, press the start/stop button, the reverse button, and the needle position button all at once with one hand (one finger on each button). Hold them down and turn on the machine. What will come up is a recalibration screen. You will see the numbers 1-5 with a little plus sign beside them. Find a small blunt object (I used the tip of a mechanical pencil with the lead in instead of out) and while holding the start/stop button, touch the plus sign beside 1-5 in numerical order. Then, turn the machine off and on again in the normal way. This should recalibrate the screen. Pass it along, people! This is something no one should have to pay for!

Nov 03, 2007 | Baby Lock Esante

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Chris Wetmore

Level 2 Expert

185 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...