Question about Audio Players & Recorders

1 Answer

HELLO, I BOUGHT MYSELF A DIGITAL LG WIRELESS DVD/CD RECEIVER SYSTEM, MODEL HT502THW. I INSTALLED IT AND WAS LISTENING TO FM WHEN I HEARD A SOUND. AFTER THE NOISE ALL I COULD SEE READING ON THE DISPLAY WINDOW IS'PROTECTION'. I COULD NOT DO ANYTHING BECAUSE OF 'PROTECTION'. WHAT IS WRONG AND HOW CAN YOU HELP ME CLEAR THE 'PROTECTION'?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

The unit is going into protection mode, before we attempt to locate a physical problem sometimes all that is needed is a RESET.

Switch Off the Unit using the Main's unit Power Switch.Keep the device untouched for Few Minutes, say 30 minutes and then Turn it ON. This would Reset the Microprocessor of the Device.

If the Problem Persists, next Step would be to remove all the Wires and again Re-Align them.

Once done, if the Problem still Persists, this is a Hardware Failure. Now, if the unit is Under Warranty, get it Replaced / Returned .However, if it is Out of Warranty, and you have the Tools and you wanted to Fix, Revert and i would be glad to help you.

Let me know,once done.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 11, 2010

  • 6 more comments 
  • cassiusquans May 11, 2010

    THANKS VERY MUCH FOR YOUR PROMPT REPLY. I HAVE ALREADY TRIED THE FIRST TWO OPTIONS BUT TO NO AVAIL. BESIDES THE WARRANT OPTION, DO YOU HAVE ANY OTHER SUGGESTIONS?

  • taran_2005
    taran_2005 May 11, 2010

    Thanks for your response!!

    If that Does Not resolve the Problem, this means that there is an Internal Failure. Usually Protection Mode is activated to make sure that there is no Further Damage to the Receiver. The reason i asked for Warranty, is that - If the Device is not under Warranty, we could go ahead and Open the Receiver as it needs to be taken care of. It is a Common Problem with most of the Receiver's.

    If you have the tools, and want to Fix it yourself, Revert and i would be glad to help you.

    Let me know,so that we could proceed.

    Hope i helped you.

    Thanks for using
    ' Fixya ' and have a nice day!!

  • cassiusquans May 11, 2010

    HELLO, THANKS FOR YOUR PROMPT REPLY. I HAVE ALREADY TRIED THE FIRST TWO OPTIONS BUT TO NO AVAIL. BESIDES THE WARRANTY OPTION, DO YOU STILL HAVE ANY SUGGESTIONS?

  • taran_2005
    taran_2005 May 11, 2010

    Thanks for your response!!

    I wish i could have a Better Solution. There is nothing more that could be done other than Opening the Receiver and Repairing it.

    I am sorry, but that is the only Solution.

    Let me know,if needed further assistance.

    Hope i helped you.

    Thanks for using
    ' Fixya ' and have a nice day!!


  • cassiusquans May 11, 2010

    HELLO, DO YOU MEAN WHEN I GET THE TOOLS TO OPEN THE RECEIVER YOU WILL HELP ME FIX THE PROBLEM ONLINE?

  • taran_2005
    taran_2005 May 11, 2010

    Thanks for your response!!

    If you want to Repair, i could Guide him. But, as i said, this would Void the Warranty ( As you mentioned this is a New Receiver ). Second, you need to have Tools like Soldering Iron, Screw Driver and other Stuff and i would only advise a DIY if you have repaired any Electronic item earlier. A Small mistake could make the Problem Worse.

    If it is Out of Warranty, you have the Tools, Experienced and could handle the problem, Revert and i would be glad to Guide you.

    Let me know,so that we could Proceed.

    Hope i helped you.

    Thanks for using
    ' Fixya ' and have a nice day!!


  • cassiusquans May 12, 2010

    I THINK I WILL CHECK THE WARRANTY WHICH I KNOW HAS NOT EXPIRED. MY GREATEST WORRY IS HOW TO GET THE RECEIVER BACK TO HONGKONG WHERE IT WAS BOUGHT FROM SINCE I'M IN GHANA.

    NEVERTHELESS, I MUST SAY I APPRECIATED YOUR INPUT AND YOUR WILLINGNESS TO HELP. I WILL SURELY GET BACK AFTER AFTER ASSESSING ALL OPTIONS WITHIN MY REACH.



    HAVE A NICE WORKING DAY.



    Cassius.

  • taran_2005
    taran_2005 May 12, 2010

    Thanks for your response!!

    You could Revert to me at any time and i would be glad to assist you.

    Let me know,if needed further assistance.

    Hope i helped you.

    Thanks for using ' Fixya ' and have a nice day!!

    PS - Do Accept the Solution,if 100% Satisfied from my response!!


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My AG-V3050 pro-logic receiver seems to have a volume control issue. The test mode volume works fine but when I switch it to fm the sound is very weak, I have to crank it all the way up to get a little...


Hi
Two dump question and than recommendation..
  • First ;During listening FM ,Your " MUTE" switch is "ON" or "OFF" ? if not how about plain STEREO mode ? did you try it ?
  • Second..how about the other Modes , i.e ..CD ,DVD etc. ? same problem or it happens only in FM ?
ok..now the possible solution;
sometimes FM stations do not properly triggers pro-logic circuit and cause such problem and you need to switch to STEREO or A.F.D mode to listen FM (AFM includes sub woofer)..
This is true for FM only and it should not happen in other modes as DVD ,CD,Phone etc..
Hope this helps!..if more help requires pls let me know.
Take care and please
Remember to rate/vote and give me 4 Thumbs Up for me to continue f
or Helping out the Community :)

Jun 29, 2011 | Teac AG-V3050 Receiver

1 Answer

My component is in LINEAR PCM MODE when it start playing dvd/cd no sound comes out. while in CASSETTE TAPE, it has a sound. i want to know what is this LINEAR PCM, coz i notice, when i turn FM it has a...


LPCM is for digital sources ONLY. Your cassette wouldn't be digital would it? FM, being an internal source on your unidentified receiver CAN'T be wired or configured incorrectly. Crack the manual open and find out how to set the parameters for all the digital inputs, then connect and select an analog input for the tape.

Jun 24, 2011 | Audio Players & Recorders

1 Answer

Someone is trying to sell me a Panasonic Home Theater system SC-HT900 from year 2005 for $200.00 Is it a good system, is it also good for listening to classic and jazz or just for movies? how is the CD...


Hi,
here it is some tech info ..it is a fair price for 2.hand unit...
as ebay has the similar prices..it seems to be a good deal...


Take care and please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)

Hope this helps!

----------------
Product Features and Technical Details
  • Dolby Digital, Dolby Pro Logic II, and DTS-decoding home theater receiver with 5 speakers and a powered subwoofer
  • 35 watts per channel x 4 "tallboy" speakers, 140 watts for the center channel, and 150 watts for the subwoofer
  • High-resolution DVD-Audio playback; JPEG, MP3, and WMA CD playback
  • Magnetic shielding for distortion-free placement near a TV or computer monitor
  • Includes digital FM/AM tuner and a universal remote control
Technical Details
  • Brand Name: Panasonic
  • Model: SC-HT900
  • Output Wattage: 390
  • Component Type: Home theater system
  • Audio Output Mode: Surround Sound
  • Surround Sound Effects: Super Surround Sound
  • DVD Type: DVD changer
  • Built In Decoder: Dolby Pro Logic II, Dolby Digital, DTS decoder
  • Remote Control Description: Universal remote control
  • Optical Digital Input: Yes
  • Audio Input: None
  • Tuner Technology: Digital
  • Radio Bands Supported: AM/FM

Jun 21, 2011 | Panasonic Home Theater System System

1 Answer

I have a problem with Sony STR-de697. the problem is that no means no sound is heard on AM / FM and anywhere else, please for assistance. thanks


AM and FM have mute circuit that no signal comes thru antenna (hope you installed external antenna ) no sound generates at all ? with computer terminolgy "garbage in ,garbage out"
Additonally , If this happens on CD,DVD or casette as well
What about speaker selector? A or B ,(based on your speaker wiring ) is properly selected or not?

Jan 10, 2010 | Sony STR-DE697 Receiver

1 Answer

No DVD sound with my LG GP08 Super Multi Drive


Hello, Phil,
I have the same problem on an Asus EEE Pc... Is your Toshiba running Windows 7? This is maybe the reason, because external drive is not compatible with this OS. That's what I heard from LG...
The drive works perfect on my Asus laptop with XP!
Please keep me informed if you solve this problem.
Regards,
Andre

Sep 06, 2009 | Computers & Internet

2 Answers

NAD T743: The digital channels stop working after a short time.


Hmm, sounds similar to my problem. Analog input and FM seems to work but all coax/opto input are dead ( for me there isn't a buzz).
Have you, fredrik648, solved your problem?
Anyone with ideas what to do?

Thanks
///Johan Westerlund.

May 11, 2009 | NAD T743 Receiver

2 Answers

No sound unless VIDEO signal is plugged into receiver


Connect the DVD player audio with digital coax into the digital audio connection as you described and the DVD video directly to the TV. Now switch the input mode on the receiver to DVD. Then switch the video output mode on the TV to correspond to the input you plugged into. Any source in 5.1 dolby digital or dts should now work properly and have picture too.

May 07, 2009 | Yamaha HTR-6130 Receiver

1 Answer

No sound from front speakers during CD operation.


I think you are using an external amplifier,if this is the case,you may be using the wrong remote wire for the amp.
Alpine use two blue wires,BLUE (only) this wire is for the pwr antenna and every time you insert a cd, this pwr line cut out.
BLUE/WHITE STRIPE this is the remote wire that you need to connect the remote of the amplifier.

thanks for rating

Feb 11, 2008 | Alpine CDE-9846 CD/MP3 Car Stereo

1 Answer

No audio with CD/DVD but works fine with aux and FM


Check the cable between the media centre and bass module for signs of damage (if its buried in the wall / under the floor and you can't check it, assume it could be damaged).

however, this sounds like a fault with the Digital Analogue Converter - this coverts the digital audio on a disc to analogue information the amplifer can use to produce sound. Contact your retailer for exchange / repair.....

Jan 12, 2008 | Bose 3·2·1 II System

2 Answers

Surround sound


It must be about the sound quality need of your amplifier. The sound processor simply needs to get clear signals from sources such as fm/am receiver, dvd/cd players etc. in order to manage'em to give you the optimum surround sound. If the fm receiver has an "FM MUTE" option, I recommend that you turn it on. By doing so, you'll receive only good quality fm stations, furthermore your amplifier will let you get surround sound. The second issue you mentioned has its own answer inside. Use a "new" cd player, you can get optical cables, digital coax cables to improve the performance if you like..

Jun 07, 2007 | Onkyo HT-SR800 System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...