Question about Pyle - Elite: 2 Channel 2400W Elite Series 2680 Car Audio Amplifier
I have a panasonic stereo model se-2680. and when i listen to the radio on it, one of the speakers work and the other doesnt. i switch the speaker wire's and the other one works and the on that used to work doesnt. sometimes both speakers work but then the next day it go back to one working and the other not. i mess with the balance and that dosent seem to do anything. it even doesnt work when i plug my ipod into the aux input. i just bought a new needle for the turntable that is in the panasonic stereo, and i cant get both speakers to work. any help would be great.
Do you have the SB-250 Thrusters speakers that originally came with the unit? If you are ever willing to sell them (or the whole unit), please let me know.
Posted on Mar 24, 2009
It sounds to me like there is a dirty connection or a failing component in your stereo. Being intermittent like you've described, is hard problem to figure out. It could be just the connection you are getting at the speaker terminal. But, If you aren't shy about opening up your stereo to see the guts, try getting some denaturated alcohol and clean the connectors inside. Then if you are familiar with soldering you could check the connections in the driver circuts and see if you can re-flow some of the connections. I had that problem with my receiver. The video output was be flaky so I flowed some new solder on some terminals and it works perfectly.
I hope things work out.
Posted on Mar 29, 2008
Tips for a great answer:
Oct 27, 2010 | Blaupunkt Car Amplifiers
Jun 05, 2010 | Car Amplifiers
Jan 04, 2010 | Car Amplifiers
Jun 21, 2009 | AudioBahn DUB Mag Audio DUB2502 Car Audio...
Feb 13, 2009 | Alpine Car Amplifiers
Jun 24, 2008 | Rockford Fosgate P3001 Car Audio Amplifier
Apr 25, 2008 | Car Amplifiers
121 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: